Гарын авлага+

Discovery 1014844

Discovery #MINDBLOWN Action Circuitry Electronic Experiment Set

Загвар: 1014844

Танилцуулга

This manual provides essential instructions for the safe and effective use of your Discovery #MINDBLOWN Action Circuitry Electronic Experiment Set. This STEM kit allows you to explore the principles of electricity, circuitry, and engineering through hands-on experiments. Please read all instructions carefully before assembly and operation.

The kit includes components to build various kinetic sculptures, spinning robots, and devices that launch and levitate objects. It is designed for users aged 8 and older.

Аюулгүй байдлын мэдээлэл

АНХААРУУЛГА: амьсгал боогдох аюул - Жижиг хэсгүүд. 3-аас доош насны хүүхдэд зориулагдаагүй.

  • Adult supervision is recommended for assembly and during experiments.
  • Do not short-circuit the battery compartments.
  • Батерейг зөв туйлшралтай (+/-) суулгасан эсэхийг шалгаарай.
  • Хуучин болон шинэ батерей, өөр төрлийн батерейг бүү холь.
  • Remove batteries from the kit if it will not be used for an extended period.
  • Keep all electronic components away from water and moisture.
  • Do not attempt to modify or disassemble any electronic modules beyond their intended use.

Хайрцагт юу байна

Бүх эд ангиудыг болгоомжтой задалж, доорх жагсаалттай харьцуулан шалгана уу. Хэрэв ямар нэгэн эд анги дутуу эсвэл гэмтсэн бол хэрэглэгчийн дэмжлэгтэй холбогдоно уу.

Contents of the Discovery Mindblown Action Circuitry Electronic Experiment Set, showing various modules and connectors.

Image: All components included in the Action Circuitry Electronic Experiment Set, laid out on a white surface.

  • 1 x Balance Ball Set
  • 1 x Ball Launch Platform
  • 1 x Blower
  • 1 x Floating Ball
  • 1 x Launch Button
  • 1 x Light Box
  • 1 х робот
  • 1 x Rocket
  • 1 x Rocket Launch Pad
  • 1 х утас дэгээ
  • 1 x Wire Maze
  • 7 x Breadboard
  • 6 x Battery Compartment (requires 2 AA batteries each, 12 total, not included)
  • 6 x On/Off Switches
  • 19 x Spring Connector

Тохиргоо

  1. Батерей суурилуулах: Each of the 6 battery compartments requires 2 AA batteries (not included). Open the battery cover on each compartment, insert 2 AA batteries according to the polarity markings (+/-), and close the cover securely.
  2. Breadboard Assembly: The breadboards can be connected together to form larger bases for your experiments. Align the interlocking edges and press them firmly together. You can create flat layouts or 3D cube designs.
  3. Модулийн байршил: Place the various experiment modules (e.g., Light Box, Robot, Rocket Launch Pad) onto the breadboard by aligning their bases with the breadboard's connection points.
  4. Холбох хэлхээ: Use the spring connectors to link the modules and battery compartments. Ensure connections are firm to establish a complete circuit. Refer to the specific experiment diagrams for correct wiring.

Operating Instructions: Experiments

This kit allows for 6 primary experiments. Follow the general setup instructions above before proceeding with specific experiment wiring.

Видео: Дууслааview of the Toy Circuitry Action Experiment Set, demonstrating various builds and functionalities.

1. Floating Ball Experiment

A child's hand interacting with the Action Circuitry set, showing a rocket, a Newton's cradle, and a light box.

Image: The complete Action Circuitry Electronic Experiment Set with various modules, including the floating ball mechanism, rocket, and Newton's cradle.

This experiment demonstrates air current and levitation.

  1. Connect a battery compartment and an On/Off switch to the Blower module using spring connectors.
  2. Place the Floating Ball on top of the Blower's nozzle.
  3. Turn the On/Off switch to the 'ON' position. The blower will activate, causing the ball to levitate in the air current.

2. Light Tunnel Experiment

Explore light and visual effects with the Light Box.

  1. Connect a battery compartment and an On/Off switch to the Light Box module.
  2. Turn the On/Off switch to 'ON'. Observe the light patterns and effects within the Light Box.

3. Wire Trap Experiment

A hand guiding a wire hook through a wire maze, part of the Action Circuitry Electronic Experiment Set.

Image: A close-up of the wire trap experiment in progress, showing a hand carefully moving the wire hook through the maze.

Test your steady hand and learn about open/closed circuits.

  1. Connect a battery compartment, an On/Off switch, and a Light Box (or other indicator module) to the Wire Maze.
  2. Connect the Wire Hook to the circuit.
  3. Turn the On/Off switch to 'ON'. Carefully guide the Wire Hook through the Wire Maze without touching the maze wire. If the hook touches the maze, the circuit will complete, and the indicator (e.g., Light Box) will activate.

4. Spinning Robot Experiment

A spinning robot module on a breadboard, part of the Action Circuitry Electronic Experiment Set.

Image: The spinning robot module assembled on a breadboard, ready for activation.

Observe motion and simple motor mechanics.

  1. Connect a battery compartment and an On/Off switch to the Robot module.
  2. Turn the On/Off switch to 'ON'. The robot will begin to spin.

5. Rocket Launcher Experiment

Experience the excitement of launching a rocket with a simple circuit.

  1. Assemble the Rocket onto the Rocket Launch Pad.
  2. Connect a battery compartment, an On/Off switch, and the Launch Button to the Rocket Launch Pad module.
  3. Turn the On/Off switch to 'ON'. Press the Launch Button to activate the launch mechanism and send the rocket upwards.

6. Balance Balls (Newton's Cradle) Experiment

Demonstrate the principles of conservation of momentum and energy.

  1. Place the Balance Ball Set (Newton's Cradle) on a stable, flat surface.
  2. Lift one of the end balls and release it to strike the adjacent ball. Observe the reaction of the balls on the opposite end.
  3. Experiment with lifting two or more balls simultaneously.

Засвар үйлчилгээ

  • Keep all components clean and dry. Wipe with a soft, dry cloth if necessary.
  • Store the kit in its original packaging or a suitable container to prevent loss or damage to small parts.
  • Regularly check battery compartments for corrosion. If corrosion is present, clean with a cotton swab and vinegar, then dry thoroughly.

Алдааг олж засварлах

АсуудалБоломжит шалтгаанШийдэл
Experiment does not work (no light, sound, or motion).
  • Батерей нь дуусчихсан эсвэл буруу суурилуулсан.
  • Сул холболтууд.
  • On/Off switch is in 'OFF' position.
  • Алдаатай бүрэлдэхүүн хэсэг.
  • Replace batteries with fresh ones; ensure correct polarity.
  • Check all spring connectors for firm contact.
  • Ensure the On/Off switch is set to 'ON'.
  • Test components individually if possible, or contact support if a component is suspected to be faulty.
Rocket does not launch.
  • Launch Button not pressed firmly.
  • Circuit issue (see above).
  • Ensure the Launch Button is fully depressed.
  • Verify all connections in the rocket launcher circuit.
Floating ball does not levitate.
  • Blower not receiving power.
  • Ball not placed correctly.
  • Check blower circuit connections and batteries.
  • Ensure the floating ball is centered directly over the blower's nozzle.

Үзүүлэлтүүд

  • Бүтээгдэхүүний хэмжээ: 3.27 x 12.24 x 15.16 инч
  • Барааны жин: 3.19 фунт
  • Загварын дугаар: 1014844
  • Үйлдвэрлэгчээс санал болгосон нас: 8 жил ба түүнээс дээш
  • Эрчим хүчний эх үүсвэр: 12 x AA 1.5V батерей (оруулаагүй)
  • Үйлдвэрлэгч: MerchSource
  • Гарсан огноо: 24 оны есдүгээр сарын 2020

Баталгаат болон дэмжлэг

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Discovery #MINDBLOWN webсайт. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.

For additional resources and other exciting STEM products, visit discoverymindblown.com.

Холбогдох баримт бичиг - 1014844

Урьдчилсанview Discovery Extreme Chemistry Science Kit: Experiments and Instructions
Detailed instructions and experiment guides for the Discovery Extreme Chemistry STEM Science Kit. Learn about chemical reactions, acids, bases, and more with 40 fun activities for ages 8+.
Урьдчилсанview Discovery Scope Set 3 User Manual: Telescope, Microscope, Binoculars
This user manual provides comprehensive instructions for the Discovery Scope Set 3, a versatile kit featuring a telescope, microscope, and binoculars. It covers general use, care, maintenance, specifications, and warranty information for these educational optical instruments.
Урьдчилсанview Discovery Zoom Power Lab Microscope Instruction Manual | Ages 10+
Explore the microscopic world with the Discovery Zoom Power Lab Microscope. This instruction manual provides detailed guidance on setup, operation, parts identification, magnification, observation techniques, cleaning, and essential safety warnings for users aged 10 and above. Includes a comprehensive parts list and troubleshooting tips.
Урьдчилсанview Discovery 450x Power Student Microscope Instruction Manual
Instruction manual for the Discovery 450x Power Student Microscope (Model 44-50450), detailing its parts, setup, operation, observation techniques, troubleshooting, cleaning, and safety guidelines for biological experiments.
Урьдчилсанview Discovery Scope Set 2 Телескоп ба микроскопын хэрэглэгчийн гарын авлага
Discovery Scope Set 2-ын иж бүрэн хэрэглэгчийн гарын авлага, хүүхэд болон одон орон судлаачдад зориулагдсан анхан шатны дуран болон микроскопын иж бүрдэл. Энэхүү гарын авлага нь хоёр оптик хэрэгслийн тохиргоо, ашиглалт, арчилгаа, засвар үйлчилгээ, аюулгүй байдлын урьдчилан сэргийлэх талаар нарийвчилсан зааврыг агуулдаг.
Урьдчилсанview Discovery Star Sky P1/P2 Planetarium: User Manual, Features, and Safety Guide
Detailed user manual for the Discovery Star Sky P1/P2 Planetarium. Learn about its features like star projection, music, rotation, remote control, and battery operation. Includes essential safety warnings and warranty information from Levenhuk.