1. Танилцуулга
This manual provides instructions for the installation, operation, and maintenance of the Vimar 02970 thermostat. This device is designed for controlling heating and cooling systems with ON/OFF functionality, featuring a control knob, relay output, and an LED backlight with brightness adjustment. It is compatible with Vimar Eikon, Arké, or Plana frames.
2. Аюулгүй байдлын мэдээлэл
Суурилуулалтыг орон нутгийн цахилгааны код, дүрмийн дагуу мэргэшсэн ажилтнууд гүйцэтгэх ёстой.
Disconnect power at the main circuit breaker before installation or maintenance to prevent electric shock.
Төхөөрөмжийг чийг, хэт өндөр температурт бүү гарга.
Ensure proper wiring connections to avoid damage to the thermostat or connected systems.
3. Бүтээгдэхүүн дууссанview
The Vimar 02970 thermostat offers intuitive control over your climate system. Key features include:
Хяналтын товчлуур: Температурыг хялбархан тохируулах зориулалттай.
LED арын гэрэлтүүлэг: Adjustable brightness for clear visibility.
Халаалтын болон хөргөлтийн горимууд: Supports both heating and cooling systems with ON/OFF control.
Friendly Programming: Designed for straightforward setup and use.
Гарын товчлол: Allows for quick interaction with the device.
Зураг 1: Урд view of the Vimar 02970 thermostat, showing the central display, control knob, and surrounding icons for temperature units, light, and mode selection.
4. Тохиргоо ба суурилуулалт
4.1 Савлах
Carefully remove the thermostat and any included components from the packaging. Verify that all parts are present.
4.2 Суурилуулалт
The Vimar 02970 thermostat is designed to be integrated into Eikon, Arké, or Plana frames. Ensure the chosen frame is compatible.
Figure 2: The Vimar 02970 thermostat integrated into a wall frame, demonstrating its flush-mount appearance.
4.3 Утас
Before wiring, ensure the main power supply to the circuit is disconnected.
Identify the power supply wires (Live, Neutral) and the heating/cooling system control wires (Common, Normally Open, Normally Closed).
Connect the Live (L) and Neutral (N) wires to the corresponding terminals on the thermostat. The thermostat operates on 100-240V~, 50/60Hz.
Connect the heating/cooling system control wires to the C (Common), NO (Normally Open), and NC (Normally Closed) relay output terminals as required by your system.
Ensure all connections are secure. The terminals are designed for wires up to 6 mm².
Зураг 3: Ар талд view of the Vimar 02970 thermostat, showing the screw terminals for electrical connections (L, N, C, NO, NC).
Зураг 4: Хажуу тал view of the Vimar 02970 thermostat, illustrating the depth and the wiring terminals with specifications (100-240V~, 5(2)A, 1B.U, -T40).
4.4 Анхдагч асаалт
After wiring, restore power at the main circuit breaker. The thermostat display should illuminate.
5. Ашиглалтын заавар
5.1 Асаах/унтраах
Цахилгаан товчийг дарна уу (⏻) located on the bottom left of the thermostat to turn the device on or off.
5.2 Температурыг тохируулах
Rotate the central control knob clockwise to increase the set temperature and counter-clockwise to decrease it. The current set temperature will be displayed on the LED screen.
Figure 5: A hand rotating the central control knob of the Vimar 02970 thermostat to adjust the temperature setting.
5.3 Changing Mode (Heating/Cooling)
The thermostat supports both heating and cooling modes. The mode can typically be switched using a dedicated button or a combination of button presses. Refer to the on-screen icons for current mode indication (e.g., snowflake for cooling, sun for heating).
5.4 Backlight Brightness Adjustment
The LED backlight brightness can be adjusted. Consult the Vimar website for specific instructions on accessing this setting, as it may involve keyboard shortcuts.
5.5 Programming (If Applicable)
The thermostat features "Friendly Programming." For detailed instructions on setting schedules or advanced programming options, refer to the comprehensive tutorials available on the official Vimar webсайт.
6. Засвар үйлчилгээ
Цэвэрлэгээ: Wipe the thermostat surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Шалгалт: Periodically check for any loose connections or signs of damage. If damage is observed, disconnect power and contact a qualified technician.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Термостатын дэлгэц унтарсан байна. | Цахилгаан хангамж байхгүй. | Check the main circuit breaker. Ensure wiring connections are secure. |
| System (heating/cooling) not responding. | Incorrect wiring; thermostat in wrong mode; set temperature not reached. | Verify wiring connections. Ensure the thermostat is in the correct mode (heating/cooling). Adjust the set temperature to be above/below the ambient temperature to trigger the system. |
| Temperature reading appears inaccurate. | Thermostat location affected by drafts or heat sources. | Ensure the thermostat is not installed near windows, doors, or direct heat/cold sources. |
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | 02970 |
| Брэнд | VIMAR |
| Ботьtage | 100-240V~ |
| Давтамж | 50/60 Гц |
| Реле гаралт | 5(2)A, 1B.U |
| Ашиглалтын температур | -T40 (Specific range not provided, consult Vimar documentation) |
| Зүйлийн жин | 70 гр |
| Бүтээгдэхүүний хэмжээс | 4.15 x 4.48 x 4.9 cm (42D x 45W x 49H millimeters) |
| Хянагчийн төрөл | Механик бариул |
| Онцлог шинж чанарууд | Lighted (LED Backlight) |
| Холболт | Утастай |
| Тохиромжтой хүрээ | Eikon, Arké, or Plana |
Figure 6: Technical diagram showing the dimensions of the Vimar 02970 thermostat (41.7mm depth, 44.8mm width, 49mm height).
9. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or additional tutorials, please visit the official Vimar website or contact your local Vimar distributor. The Vimar website provides comprehensive instructions and tutorials for programming and advanced features.
Вимар Webсайт: www.vimar.com
