1. Танилцуулга
This manual provides essential information for the safe and efficient use of your EMITEVER 24V Power Supply. Please read this manual thoroughly before installation and operation, and retain it for future reference.
1.1 Багцын агуулга
- 1 x 60W DC Power Supply
1.2 Бүтээгдэхүүн дууссанview
The EMITEVER 24V Power Supply is a UL-Listed 60W LED power adapter designed to convert 100-240V AC input to a stable 24V DC output at 2.5A. It is suitable for various low-voltage applications, including LED strip lights, CCTV cameras, and other 24V devices requiring up to 60 watts of power.
Image 1.1: The EMITEVER 24V 60W LED Power Adapter, including the main unit, AC power cord, and a DC connector adapter.
2. Аюулгүй байдлын мэдээлэл
2.1 Аюулгүй ажиллагааны чухал заавар
- Ensure your device operates at 24V and requires under 60W to prevent damage, flickering, or overheating.
- This power supply does not have charging or dimming functions. For dimming, use an external PWM controller at the DC end.
- The product has an IP30 rating, making it suitable for dry indoor environments only. Avoid exposure to moisture or water.
- Цахилгаан хангамжийг нээж болохгүй casing. Дотор нь хэрэглэгчийн засвар үйлчилгээ хийх хэсэг байхгүй.
- Хүүхдийн гар хүрэхгүй газар хадгална.
- Холболт хийх эсвэл салгахаасаа өмнө цахилгааныг салга.
2.2 UL Certified Protection
This 24V Power Adapter is cUL Listed, indicating compliance with rigorous safety standards. It incorporates comprehensive protection mechanisms to ensure device safety and longevity:
- Хэт гүйдлийн хамгаалалт: Хэт их гүйдэл татахаас үүдэлтэй гэмтлээс сэргийлнэ.
- Богино залгааны хамгаалалт: Богино холболтын үед цахилгааныг автоматаар унтраадаг.
- Хэт халалтаас хамгаалах: Prevents the adapter from reaching unsafe temperatures.
Image 2.1: Internal component comparison illustrating the quality and safety features, including UL certification, of the EMITEVER power supply.
3. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Оролтын хэмжээtage | 100-240V гүйдэл |
| Оролтын давтамж | 50/60 Гц |
| Гаралтын ботьtage | 24V DC (Constant Voltage) |
| Хамгийн их үр дүнгийн гүйдэл | 2.5 Amps |
| Хамгийн их гаралтын чадал | 60 ватт |
| DC Jack Size | 5.5 x 2.1mm (Inner Positive, Outer Negative) |
| IP үнэлгээ | IP30 (Зөвхөн дотор ашиглах) |
| Бүтээгдэхүүний хэмжээс | 4.7"D x 2.1"W x 1.2"H (11.9cm x 5.3cm x 3.0cm) |
| Жин | 10.55 унц (ойролцоогоор 300 гр) |
| Эрчим хүчний эх үүсвэр | Утастай цахилгаан |
| Суурилуулах төрөл | Wall Mount (via AC plug) |
| Гэрчилгээ | cUL жагсаалтад орсон |
Image 3.1: Physical dimensions and cable lengths of the EMITEVER 24V 60W power supply.
4. Тохиргоо & Суурилуулалт
4.1 Суулгахаас өмнө
- Verify that your device requires a 24V DC power input.
- Confirm that the total wattage required by your connected devices does not exceed 60W.
- Ensure the installation environment is dry and free from moisture.
4.2 Холболтын аргууд
The EMITEVER 24V Power Supply offers two primary methods for connecting to your devices:
- Direct DC Jack Connection:
Connect the power supply's DC output plug (5.5 x 2.1mm) directly into a compatible DC input jack on your device. This is a plug-and-play method requiring no additional wiring. - Терминал блокийн холболт:
For devices that require bare wire connections, use the included DC connector to terminal block adapter. Loosen the screws on the terminal block, insert the positive and negative wires from your device, and then tighten the screws. Ensure correct polarity (Inner Positive, Outer Negative for the DC jack).
Image 4.1: Visual guide to the two available connection methods for the power supply.
Зураг 4.2: Нарийвчилсан view of the 5.5 x 2.1mm DC output size and polarity.
4.3 Тохиромжтой байдал
This power supply is compatible with a wide range of 24V DC devices that require up to 60 watts of power, including but not limited to:
- EMITEVER LED strip lights, modules, light bars, and cabinet lights
- Ландшафтын гэрэлтүүлэг
- Утасгүй чиглүүлэгч
- Small 3D printers
- Хамгаалалтын камерууд
- Other 24V devices under 60 watts
5. Ашиглалтын заавар
After ensuring all connections are secure and correct, plug the AC power cord into a standard 100-240V wall outlet. The power supply will begin to deliver 24V DC power to the connected device. A green indicator light on the adapter will illuminate when power is active.
The start-up time for the power supply can take 1-3 seconds to stabilize the output and extend its operational life. No further user interaction is required for basic operation.
Image 5.1: The power supply in operation, providing stable power to an LED strip light.
6. Засвар үйлчилгээ
- Цэвэрлэгээ: Disconnect the power supply from the wall outlet and all connected devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or sprays.
- Хадгалах: Store the power supply in a cool, dry place away from direct sunlight and moisture when not in use.
- Шалгалт: Periodically inspect the power cords and the adapter casing for any signs of damage. If damage is found, discontinue use and replace the unit.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Device not lighting up / No power | Буруу ботьtage (not 24V) Төхөөрөмж ватtage exceeds 60W Сул холболт Алдаатай гаралт Цахилгаан хангамжийн доголдол | Verify device voltage ба ватtage шаардлага. Бүх холболт найдвартай эсэхийг шалгана уу. Ханын залгуурыг өөр төхөөрөмжөөр шалгана уу. Replace the power supply if it's faulty. |
| Анивчиж буй гэрэл | Төхөөрөмж ватtage exceeds 60W Сул холболт Тохиромжгүй төхөөрөмж | Нийт ватыг баталгаажуулна ууtage 60 Вт-аас бага. Холболтуудыг шалгана уу. Confirm device compatibility with a 24V constant voltage хангамж. |
| Power supply is hot | Хэт ачаалал (төхөөрөмжийн ватт)tage хэт өндөр) Агааржуулалт муу | Reduce load to under 60W. Ensure adequate airflow around the power supply. If overheating persists, discontinue use. |
| Green indicator light not on | Хувьсах гүйдлийн оролтын хүч байхгүй Дотоод алдаа | AC тэжээлийн утас болон ханын залгуурын холболтыг шалгана уу. If power is present at the outlet, the power supply may be faulty and require replacement. |
8. Баталгаат хугацаа ба дэмжлэг
EMITEVER provides a 3-year worry-free service for this product. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
For warranty claims or technical support, please contact EMITEVER customer service through the retailer where the product was purchased or visit the official EMITEVER webхолбоо барих мэдээлэл авах сайт.
