1. Бүтээгдэхүүн дууссанview
The SECRUI Wireless Doorbell system provides a convenient and reliable solution for home and office entry notification. This system includes a plug-in receiver and two waterproof push buttons (transmitters), offering a wide operating range and multiple customization options.
Image 1: SECRUI Wireless Doorbell System Components
Гол онцлогууд:
- Утасгүй хүрээ: Ил задгай талбайд 1000 фут (300 метр) хүртэл.
- Хонх: 58 selectable melodies.
- Дууны түвшин: 5 adjustable levels, including mute mode, up to 120dB.
- Цаг агаарын эсэргүүцэл: IP55 rated push buttons, operational from -4°F to 140°F (-20°C to 60°C).
- Санах ойн функц: Retains last selected chime and volume settings after power loss.
- LED үзүүлэлт: Visual alert on both receiver and push button.
2. Багцын агуулга
Таны багцад бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу:
- 1 x Залгуурын хүлээн авагч
- 2 x Push Button (Transmitter, battery included)
- 2 х наалдамхай тууз
- 4 х эрэг
- 4 х зангуу
- 1 х хэрэглэгчийн гарын авлага
3. Аюулгүй байдлын мэдээлэл
Аюулгүй байдлын чухал заавар:
- Цахилгаан багаж ашиглахдаа үйлдвэрлэгчийн зөвлөгөөг үргэлж дагаж мөрдөж, нүх өрөмдөхдөө тохирох хамгаалалтын хэрэгсэл (жишээлбэл, аюулгүйн шил) зүүгээрэй.
- Хананд цооног өрөмдөхийн өмнө далд цахилгаан кабель, усны хоолой байгаа эсэхийг шалгана. Хэрэв эргэлзэж байгаа бол кабель/хоолойн байршуулагч ашиглахыг зөвлөж байна.
- Ensure the receiver is plugged into a 120 Volts AC outlet.
4. Тохиргоо ба суурилуулалт
The SECRUI Wireless Doorbell is designed for easy installation. No complex wiring is required.
4.1 Хүлээн авагч суурилуулах
- Залгаас: Insert the plug-in receiver into a standard 120V AC electrical outlet in your desired location. Ensure the outlet is easily accessible and not obstructed.
- Асаах: The receiver will power on and emit a default chime.
Image 2: Easy Receiver and Push Button Setup
4.2 Push Button (Transmitter) Installation
The push button can be installed using either adhesive tape or screws.
Image 3: DIY Installation Options (Adhesive and Screw Mounting)
- Байршлыг сонгох: Select a flat, clean surface near your door. Ensure the location is within the 1000ft wireless range of the receiver.
- Наалдамхай бэхэлгээ:
- Clean the mounting surface thoroughly to remove dust and debris.
- Peel off one side of the double-sided adhesive tape and attach it to the back of the push button.
- Peel off the other side of the tape and firmly press the push button onto the desired surface for at least 30 seconds.
- Шураг бэхэлгээ:
- Open the push button casing (refer to the diagram in the manual for specific instructions on opening).
- Mark the positions for the screw holes on the wall.
- Drill pilot holes if necessary and insert the anchors.
- Secure the back plate of the push button to the wall using the provided screws.
- Reattach the front cover of the push button.
The push button is designed to be waterproof (IP55 rated) and can withstand various weather conditions, including rain, snow, and extreme temperatures from -4°F to 140°F.
Image 4: Weather Resistance of the Push Button
5. Ашиглалтын заавар
5.1 Changing Chimes
- Cycle Through Chimes: Press the "Chime Selection" button on the receiver to cycle through the 58 available melodies.
- Хонхны дууг сонгох: Stop pressing the button when you hear your desired chime.
- Хослуулах (шаардлагатай бол): If the chime does not play when the push button is pressed after selection, you may need to re-pair the push button with the receiver. (See Section 5.4 for pairing instructions).
Image 5: Chime and Volume Controls
5.2 Дууны хэмжээг тохируулах
- Дууны товчлуур: Press the "Volume" button on the receiver to adjust the sound level. There are 5 levels, ranging from mute (0dB) to maximum (120dB).
- Дууг хаах горим: Continue pressing the volume button until the mute icon is displayed or the sound is off. This is useful for situations like a sleeping baby or during classes.
Image 6: Volume and Mute Mode Options
5.3 LED үзүүлэлт
Both the receiver and the push button feature an LED indicator. When the push button is pressed, its LED will light up, and the receiver's LED will flash, providing a visual alert in addition to the chime.
5.4 Pairing Additional Push Buttons or Re-pairing
Your doorbell system comes pre-paired. If you need to pair additional push buttons or re-pair existing ones:
- Хослуулах горимыг оруулна уу: Press and hold the "Volume" button on the receiver for approximately 5 seconds until the receiver emits a "ding" sound and its LED indicator flashes rapidly. This indicates it's in pairing mode.
- Түлхэх товчийг идэвхжүүлэх: Within 10 seconds, press the push button you wish to pair. The receiver will chime to confirm successful pairing.
- Хослуулах горимоос гарах: The receiver will automatically exit pairing mode after 10 seconds if no button is pressed, or you can press any button on the receiver to exit.
The system supports pairing multiple push buttons to one receiver, and multiple receivers to one push button.
6. Засвар үйлчилгээ
6.1 Цэвэрлэгээ
Wipe the doorbell receiver and push buttons with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface.
6.2 Battery Replacement (Push Button)
The push button uses a CR2032 lithium battery, which typically lasts for about 3 years. When the push button's LED indicator no longer lights up when pressed, or the range decreases significantly, it's time to replace the battery.
Image 7: 3-Year Battery Life
- Нээлттэй Casing: Carefully open the back cover of the push button using a small screwdriver or coin.
- Хуучин батерейг арилгах: Хуучин CR2032 зайг салга.
- Шинэ батерей оруулах: Шинэ CR2032 батерейг эерэг (+) талыг дээш харуулан оруулна.
- Хаах Casing: Snap the back cover firmly back into place.
Хуучин батерейг орон нутгийн дүрэм журмын дагуу устгана уу.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Doorbell does not chime when button is pressed. |
|
|
| Богино үйл ажиллагааны хүрээ. |
|
|
| Chime volume is too low or too loud. | Дууны тохиргоог тохируулах шаардлагатай. | Press the "Volume" button on the receiver to adjust to the desired level (see Section 5.2). |
| Хүлээн авагчийн LED анивчсан боловч дуу гарахгүй. | Receiver is in mute mode. | Press the "Volume" button on the receiver to increase the volume (see Section 5.2). |
Image 8: Wireless Range Illustration
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | AUB0963RQZFN |
| Брэнд | СЕКРУИ |
| Эрчим хүчний эх үүсвэр (хүлээн авагч) | АС 120 вольт |
| Эрчим хүчний эх үүсвэр (товчлуур) | 1 x CR2032 литийн манганы давхар ислийн батерей (багцад багтсан) |
| Батерейны дундаж хугацаа | 3 жил |
| Утасгүй сүлжээ | Ил задгай агаарт 1000 фут (300 метр) хүртэл |
| Дууны түвшин | 120 дБ хүртэл |
| Хонхны тоо | 58 |
| Дууны түвшин | 5 (including mute) |
| Weather Resistance (Push Button) | IP55 |
| Ашиглалтын температур | -4°F - 140°F (-20°C - 60°C) |
| Материал | ABS |
| Өнгө | Хар |
| Суулгах арга | Өөрөө наалддаг ба эрэг шурагтай |
| Онцлог шинж чанарууд | Adjustable Volume, Optional Ringtone, Memory Function, LED Indicator |
| Зүйлийн жин | 4.6 унц (130 грамм) |
| Багцын хэмжээ | 4.25 x 2.87 x 2.44 инч (10.8 x 7.3 x 6.2 см) |
9. Баталгаат хугацаа ба дэмжлэг
For warranty information, please refer to the documentation included with your product or visit the official SECRUI website. If you encounter any issues or have questions regarding your SECRUI Wireless Doorbell, please contact SECRUI customer support for assistance.
SECRUI Official Store: Visit SECRUI Store on Amazon
