aigo AZ300 Mid Tower Computer Case User Manual

1. Танилцуулга

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Аюулгүй байдлын мэдээлэл

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Жижиг эд анги, боолтыг хүүхдүүдээс хол байлга.
• Цахилгааны аюулаас урьдчилан сэргийлэхийн тулд зөв газардуулга хийх.

3. Бүтээгдэхүүн дууссанview

3.1 Урд талын оролт гаралтын самбар

The front I/O panel provides convenient access to essential ports and controls.

Figure 2: Front I/O Panel Layout

• Төрөл-C порт: 1x USB Type-C port for modern connectivity.
• USB 2.0 порт: 1x USB 2.0 port for peripheral connections.
• USB 3.0 порт: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Цахилгаан товч: Компьютерийг асаах эсвэл унтраах үйлчилгээ үзүүлдэг.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Эх хавтангийн нийцтэй байдал: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• GPU урт: Maximum GPU length of 400mm.
• Цахилгаан хангамжийн системийн урт: Supports standard ATX power supplies up to 200mm.

4. Суулгах заавар

4.1 Хэргийг бэлтгэх

1. Хайрцгийг хавтгай, тогтвортой гадаргуу дээр байрлуул.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Зураг 4: Арын тал View of Case

4.2 Эх хавтангийн суурилуулалт

1. Оролт/Гаралтын бамбайг (хэрэв урьдчилан суулгаагүй бол) хайрцагны арын нүхэнд суулгана уу.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Эх хавтанг нийлүүлсэн эрэг ашиглан бэхлээрэй.

Figure 5: Motherboard Mounting Areas

4.3 Цахилгаан хангамжийн нэгж (PSU) суурилуулах

1. Цахилгаан хангамжийн хэсгийг хайрцагны арын доод хэсэгт байрлуулна уу.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Хадгалах хөтч суурилуулах

1. 2.5" SSD: Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. 3.5" HDD: Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Шаардлагатай өргөтгөлийн үүрний тагийг хайрцагны арын хэсгээс ав.
2. График карт эсвэл бусад өргөтгөлийн картуудаа эх хавтан дээрх тохирох PCIe үүрэнд хийнэ үү.
3. Картуудыг боолтоор бэхлээрэй.

4.6 Хөргөлтийн систем суурилуулах

The aigo AZ300 supports flexible cooling configurations.

• Фэнүүдийн дэмжлэг: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Радиаторын дэмжлэг: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Кабелийн менежмент

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. Үйл ажиллагаа

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь таны компьютерын эд ангиудын оновчтой ажиллагаа, урт хугацааны ажиллагааг хангахад тусална.

6.1 Тоосны шүүлтүүр цэвэрлэх

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• PSU тоосны шүүлтүүр: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Алдаа засах

• Систем асахгүй байна: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Дэлгэц байхгүй: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Хэт халалт: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• USB портууд ажиллахгүй байна: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo webсайт.