Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. Танилцуулга

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. Аюулгүй байдлын мэдээлэл

• Аливаа эд ангиудыг суулгах эсвэл салгахаасаа өмнө цахилгаан тэжээлийг ханын залгуураас үргэлж салга.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Be cautious of sharp edges inside the case.
• Жижиг эд анги, боолтыг хүүхдүүдээс хол байлга.
• Ensure proper ventilation around the assembled PC to prevent overheating.

3. Багцын агуулга

Таны багцад бүх зүйл байгаа эсэхийг шалгана уу:

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• Дагалдах хэрэгслийн хайрцаг (эрэг, тулгуур, кабель зангиа гэх мэт агуулсан)
• Хэрэглэгчийн гарын авлага (энэ баримт бичиг)

4. Бүтээгдэхүүн дууссанview

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

Гол онцлогууд:

• Эх хавтангийн дэмжлэг: Compatible with ATX, Micro-ATX, and ITX motherboards.
• Хөргөх: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• Тоосны шүүлтүүр: Equipped with a magnetic anti-dust mesh on the top panel.
• Хадгалах: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• Хажуугийн самбар: Tempered glass side panels for an aesthetic view дотоод бүрэлдэхүүн хэсгүүдийн.

Зураг 4.1: Урд тал view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

Зураг 4.2: Дээрээс доош view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. Тохиргоо ба суурилуулалт

5.1 Removing Side Panels

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 Эх хавтангийн суурилуулалт

1. Эх хавтангийн хамт ирсэн I/O хамгаалалтыг гэрний арын нүхэнд суулгана уу.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. Дагалдах хэрэгслийн хайрцгаас тохирох боолтыг ашиглан эх хавтанг бэхлэнэ үү.

5.3 Цахилгаан хангамжийн нэгж (PSU) суурилуулах

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 Хадгалах хөтч суурилуулах

• 3.5" HDD: Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• 2.5" SSD: SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 График карт ба өргөтгөлийн картууд

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 Кабелийн менежмент

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and aesthetics.

5.7 Connecting Front I/O and Fan Cables

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. Ашиглалтын заавар

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

Зураг 6.1: Ойрын зураг view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. Засвар үйлчилгээ

• Тоосны шүүлтүүр цэвэрлэх: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• Ерөнхий цэвэрлэгээ: Зөөлөн ашиглах, damp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• Дотоод тоос зайлуулах: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. Алдаа засах

8.1 Компьютер асахгүй байна

• Цахилгааны кабелийг цахилгаан тэжээлийн хэсэг болон ханын залгуурт найдвартай холбосон эсэхийг шалгаарай.
• Check that the PSU switch is in the 'ON' position.
• Урд талын самбарын цахилгаан шилжүүлэгчийн кабель эх хавтангийн толгой хэсэгт зөв холбогдсон эсэхийг шалгана уу.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Fans Not Spinning / RGB Not Lighting Up

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 Хэт халалтын асуудал

• Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• Тоосны шүүлтүүр болон дотор эд ангиудыг тогтмол цэвэрлэж байх.
• Verify that CPU cooler and GPU fans are functioning properly.

9. Техникийн үзүүлэлтүүд

10. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep webсайт. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.