VPFET HDMI Extender User Manual

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of your VPFET HDMI Extender. This device allows you to extend 1080p HDMI signals up to 200 feet (60 meters) over a single Cat5e/6/7 Ethernet cable. It supports Power over Cable (POC) technology, requiring power only at the Transmitter (TX) unit.

2. Аюулгүй байдлын мэдээлэл

• Ensure all cables are connected securely before powering on the device.
• Use only the provided 5V DC power adapter.
• Төхөөрөмжийг чийг, хэт өндөр температурт бүү гарга.
• Төхөөрөмжийг задлахаас зайлсхийх; мэргэшсэн боловсон хүчинд үйлчилгээ үзүүлэх.
• Use high-quality oxygen-free copper Cat5e/6/7 cables for optimal performance and transmission distance.

3. Багцын агуулга

Таны багцад бүх зүйл байгаа эсэхийг шалгана уу:

• 1 x HDMI Transmitter (TX) Unit
• 1 x HDMI Receiver (RX) Unit
• 1 x 5V тогтмол гүйдлийн тэжээлийн хангамж
• 1 х хэрэглэгчийн гарын авлага

Image: Contents of the VPFET HDMI Extender package, showing the transmitter, receiver, power adapter, and user manual.

4. Бүтээгдэхүүн дууссанview болон бүрэлдэхүүн хэсгүүд

Familiarize yourself with the ports and indicators on both the Transmitter (TX) and Receiver (RX) units.

Зураг: Нарийвчилсан view of the Transmitter (TX) and Receiver (RX) units, highlighting HDMI Input/Output, 5V Power Output, EDID Copy button, and RJ45 ports.

Transmitter (TX) Unit:

• HDMI оролт: Connects to the HDMI source device (e.g., PC, DVD player, game console).
• 5V тэжээлийн оролт: Connects to the included 5V DC power adapter.
• EDID Copy Button: Used to copy EDID information from the display.
• RJ45 Output (OUT): Connects to the Receiver (RX) unit via Cat5e/6/7 cable.

Receiver (RX) Unit:

• HDMI гаралт: Connects to the HDMI display device (e.g., TV, monitor).
• RJ45 Input (IN): Connects to the Transmitter (TX) unit via Cat5e/6/7 cable.
• Note: The RX unit receives power via the Cat cable (POC) from the TX unit.

5. Тохируулах заавар

HDMI өргөтгөгчөө тохируулахын тулд дараах алхмуудыг дагана уу:

1. HDMI эх үүсвэрийг TX руу холбоно уу: Connect your HDMI source device (e.g., PC, DVD player, game console) to the HDMI оролт port of the Transmitter (TX) unit using a high-quality HDMI cable.
2. Connect Display to RX: Connect your HDMI display device (e.g., TV, monitor) to the HDMI OUT port of the Receiver (RX) unit using a high-quality HDMI cable.
3. Connect TX and RX with Ethernet Cable: -г холбоно уу RJ45 OUT TX нэгжийн порт руу RJ45 IN port of the RX unit using a single Cat5e, Cat6, or Cat7 Ethernet cable. Ensure the cable is oxygen-free copper for optimal performance.
4. Power On TX Unit: Дагалдаж ирсэн 5V DC тэжээлийн адаптерийг дараахтай холбоно уу 5V цахилгаан оролт port on the Transmitter (TX) unit. The RX unit will receive power via the Ethernet cable (POC).
5. Холболтыг баталгаажуулах: Once all connections are made and the TX unit is powered, check for signal on your display.

Image: Connection diagram illustrating how to connect the HDMI source (laptop, PC, DVD, TV Box) to the Transmitter (TX), the TX to the Receiver (RX) via a Cat5e/6/7 cable, and the RX to the display.

EDID Copy Function:

The EDID (Extended Display Identification Data) copy function ensures the best video and audio signals are transmitted by allowing the TX unit to learn the display's capabilities. It is recommended to perform this step if you experience display issues.

1. Connect the Transmitter (TX) unit directly to your monitor/display using an HDMI cable (without the RX unit or Cat cable).
2. Connect the 5V power adapter to the TX unit.
3. -г удаан дар EDID товчлуур on the TX unit for approximately 3 seconds.
4. The signal indicator light will flash 3 times, indicating that the EDID information has been successfully copied and stored.
5. You can now proceed with the full setup as described above. The copied EDID will be remembered until the TX unit is reset or a new EDID copy operation is performed.

To restore factory EDID settings, connect the TX unit to power, then press and hold the EDID button for 3 seconds. The signal indicator will light up and then turn off, confirming the reset.

Image: Close-up of the Transmitter (TX) unit, highlighting the EDID button and its function in copying display information.

6. Ашиглалтын заавар

Once the setup is complete, the VPFET HDMI Extender operates automatically. Ensure your source device is powered on and outputting an HDMI signal, and your display is set to the correct HDMI input.

• Power Over Cable (POC): The TX unit powers the RX unit through the Ethernet cable, simplifying installation by eliminating the need for a power outlet at the display end.
• Automatic Equalization: The built-in automatic equalization algorithm adjusts for cable transmission distance, ensuring stable signal transmission without manual configuration.
• Дэмжигдсэн шийдвэрүүд: The extender supports resolutions up to 1920x1200@60Hz and 1080p@60Hz.
• Дэмжигдсэн аудио форматууд: DTS-HD, Dolby-trueHD, DTS, Dolby-AC3, DSD.

Image: Illustration of the unilateral power supply (POC) feature, indicating that only the transmitting (TX) end requires a power connection, while the receiving (RX) end does not.

Image: An illustration of the HDMI Extender in operation, showing a laptop connected to the TX unit, which is then connected via a long Ethernet cable to the RX unit, and finally to a large display, demonstrating extended transmission distance.

7. Техникийн үзүүлэлтүүд

Image: Dimensions of the VPFET HDMI Extender Transmitter (TX) unit, showing its compact size.

8. Алдаа засах

Хэрэв танд асуудал тулгарвал дараах нийтлэг асуудал, шийдлүүдийг үзнэ үү.

• Зураг/Дохио алга:
  • Бүх HDMI болон Ethernet кабелиуд найдвартай холбогдсон эсэхийг шалгаарай.
  • Verify the TX unit is powered on with the included 5V adapter.
  • Дэлгэц зөв HDMI оролтод тохируулагдсан эсэхийг шалгана уу.
  • Try performing the EDID Copy procedure (Section 5).
  • Test with shorter, certified HDMI and Ethernet cables.
  • Ensure the Ethernet cable is Cat5e/6/7 (oxygen-free copper recommended) and not damaged.
• Анивчих/Тасралтгүй дохио:
  • Check cable lengths; ensure they are within the specified limits (200ft for Cat cable, 16ft for HDMI).
  • Ensure the Ethernet cable is not running parallel to power lines or other sources of interference.
  • Өөр Ethernet кабель ашиглаж үзнэ үү.
  • Perform the EDID Copy procedure.
• Аудио байхгүй:
  • Өөрийн эх төхөөрөмж болон дэлгэц дээрх аудио тохиргоог баталгаажуулна уу.
  • HDMI кабель нь аудио дамжуулалтыг дэмждэг эсэхийг шалгаарай.
  • Perform the EDID Copy procedure.

9. Засвар үйлчилгээ

The VPFET HDMI Extender requires minimal maintenance. Follow these guidelines to ensure longevity:

• Төхөөрөмжийг нарны шууд тусгал, дулааны эх үүсвэрээс хол, сэрүүн, хуурай газар хадгална.
• Гаднах хэсгийг зөөлөн, хуурай даавуугаар цэвэрлэ. Шингэн цэвэрлэгч, аэрозоль хэрэглэж болохгүй.
• Хэт халалтаас урьдчилан сэргийлэхийн тулд нэгжийн эргэн тойронд зохих агааржуулалтыг хангана.

10. Баталгаат хугацаа ба дэмжлэг

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official VPFET website. Please have your model number (B099ZCTV74) and purchase date ready when contacting support.