WOLFBOX T10 Plus/T10

WOLFBOX T10 Plus/T10 Mirror Dash Cam Hardwire Kit Instruction Manual

Model: T10 Plus/T10 Hardwire Kit

1. Бүтээгдэхүүн дууссанview

The WOLFBOX Hardwire Kit is designed to provide continuous power to your WOLFBOX T10 Plus/T10 Mirror Dash Cam, enabling 24/7 parking surveillance and eliminating the need for a cigarette lighter adapter. This kit is compatible with vehicles operating on 12V to 24V systems.

  • Өргөн нийцтэй байдал: Connects directly to your vehicle's power system, supporting 12V to 24V input, suitable for cars, trucks, buses, and SUVs.
  • 24/7 зогсоолын хяналт: Provides constant power to your dash cam, allowing it to monitor your vehicle even when the engine is off, protecting against theft and incidents in parking lots.
  • Ignition-Controlled Power: Can be wired to an ignition-switched fuse for power that turns on and off with your vehicle, ensuring automatic operation without manual intervention.
  • Mini USB Plug: Compatible with all Mini USB dash cams, GPS navigators, and radar detectors, freeing up your vehicle's cigarette lighter port.
  • Бага ботьtage Хамгаалалт: Features a smart system that automatically cuts power to the dash cam if your vehicle's battery voltage drops below 11.6V (for 12V systems) or 22.8V (for 24V systems), preventing battery drain.
Diagram showing the internal structure of the hardwire kit cable, detailing flexible TPE jacket, tinned copper braid and aluminum foil shield, bulletproof aramid fiber, thick 23 AWG power wire, and thick 26 AWG data wire.

Figure 1: Internal Cable Structure of the Hardwire Kit

2. Тохиргоо ба суурилуулалт

2.1 Аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээ

Before beginning the installation, ensure the vehicle's engine is off. Disconnect the negative terminal of the vehicle's battery to prevent short circuits or electrical damage during installation.

2.2 Бүрэлдэхүүн хэсгүүдийн тооview

The hardwire kit includes the main power cable with a Mini USB connector, a voltage converter box, and various fuse tap sizes to match your vehicle's fuse box.

Image showing four different fuse tap sizes: Medium, Small, Mini, and Micro, with corresponding fuses. Text indicates to insert the same size fuse into the top slot of the fuse tap.

Figure 2: Included Fuse Tap Sizes

2.3 Утасны холболтын диаграмм

Refer to the diagram below for a visual guide on connecting the hardwire kit to your vehicle's fuse box.

Wiring diagram for the hardwire kit. It shows the dash cam connected via Mini USB to the power cord. The power cord connects to a voltage converter. From the converter, a red accessory wire connects to an ACC fuse (2A) in the fuse box, which is powered with the engine key. A yellow battery cord connects to a BATT fuse in the fuse box, which is always powered. A black earth cord connects to a metal part of the fuse box for ground. A warning states to disconnect the negative battery terminal before connecting.

Figure 3: Hardwire Kit Wiring Diagram

2.4 Алхам алхмаар суурилуулах

  1. Dash Cam-д холбогдох: Plug the Mini USB end of the hardwire kit into your WOLFBOX dash cam.
  2. Гал хамгаалагчийн хайрцгийг олох: Identify your vehicle's fuse box. This is typically located under the dashboard, in the glove compartment, or in the engine bay. Consult your vehicle's owner's manual if needed.
  3. Connect Constant Power (Yellow Cable): The yellow cable (BATT) provides constant power. Locate a fuse in your vehicle's fuse box that is always live, even when the ignition is off. Use an appropriate fuse tap from the kit to connect the yellow cable to this fuse slot. Ensure you insert the original fuse and a new fuse (if provided) into the fuse tap.
  4. Connect Ignition-Switched Power (Red Cable): The red cable (ACC) provides power only when the ignition is on. Locate a fuse in your vehicle's fuse box that receives power only when the ignition is turned on. Use an appropriate fuse tap to connect the red cable to this fuse slot.
  5. Connect Ground (Black Cable): The black cable (GND) is for grounding. Connect this cable to a metal part of the vehicle's chassis or a bolt that is securely fastened to the vehicle's metal frame. This provides a stable ground connection.
  6. Маршрутын кабель: Carefully route all cables to conceal them and prevent interference with driving. Use cable clips or ties to secure them.
  7. Батерейг дахин холбох: Once all connections are secure, reconnect the negative terminal of your vehicle's battery.
  8. Туршилтын систем: Start your vehicle and check if the dash cam powers on. Turn off the ignition and observe if the parking surveillance mode activates (if applicable to your dash cam model).
Three-step installation guide for the hardwire kit. Step 1: Yellow cable connects to a constant power fuse in the car fuse box. Step 2: Red wire connects to the ACC fuse slot and the yellow wire to the constant fuse slot. Step 3: Black cable (GND) connects to a metal part of the vehicle.

Figure 4: Hardwire Kit Installation Steps

3. Үйл ажиллагаа

Once installed, the WOLFBOX Hardwire Kit operates automatically based on your wiring configuration and dash cam settings.

3.1 Parking Surveillance

When the vehicle's ignition is turned off, the hardwire kit continues to supply power to the dash cam from the constant power connection (yellow cable). This enables your dash cam's parking surveillance features, such as motion detection or time-lapse recording, to function continuously.

3.2 Бага эзлэхүүнtage Хамгаалалт

The hardwire kit is equipped with a low voltage protection system. If your vehicle's battery voltage drops to 11.6V (for 12V systems) or 22.8V (for 24V systems), the kit will automatically cut power to the dash cam. This prevents excessive discharge of your vehicle's battery, ensuring you can start your engine. Power will resume once the battery voltage нь аюулгүй түвшинд буцаж ирдэг.

4. Засвар үйлчилгээ

The WOLFBOX Hardwire Kit requires minimal maintenance. Periodically check the connections to ensure they remain secure and free from corrosion. Ensure cables are not pinched or exposed to excessive heat or moisture. If you notice any issues with power supply to your dash cam, inspect the fuse connections and the ground point.

5. Алдаа засах

  • Хяналтын камер асахгүй байна:
    • Verify all connections (Mini USB, ACC, BATT, GND) are secure.
    • Check the fuses in the fuse taps. Replace any blown fuses.
    • Тээврийн хэрэгслийн батерейны цэнэг хэр байгааг шалгаарайtage нь бага хэмжээнээс дээгүүр байнаtage protection threshold (11.6V for 12V, 22.8V for 24V).
  • Зогсоолын хяналт ажиллахгүй байна:
    • Confirm the yellow (BATT) cable is connected to a constant power fuse that is always live.
    • Check your dash cam's settings to ensure parking surveillance mode is enabled.
  • Incorrect Fuse Tap Size:
    • The kit includes multiple fuse tap sizes. Ensure you are using the correct size for your vehicle's fuse box.
    • If your vehicle requires a fuse type not included, you may need to purchase an additional compatible fuse tap separately.
  • Dash Cam Turns Off Unexpectedly:
    • This may be due to the low voltage protection activating. Check your vehicle's battery voltage. If it's low, the kit will cut power to protect the battery.

6. Техникийн үзүүлэлтүүд

БрэндЧоно хайрцаг
ЗагварT10 Plus/T10 Hardwire Kit
Холболтын технологиUSB
Онцлог шинж чанарParking Monitor, Low Voltage Хамгаалалт
Тээврийн хэрэгслийн үйлчилгээний төрөлМашин, ачааны машин
Оролтын хэмжээtage12V - 24V
Бага ботьtage Cut-off (12V system)11.6 В
Бага ботьtage Cut-off (24V system)22.8 В
Зүйлийн жин7 унц
Багцын хэмжээ5.98 x 4.53 x 2.36 инч

7. Баталгаат хугацаа ба дэмжлэг

WOLFBOX нь өндөр чанартай бүтээгдэхүүн нийлүүлэх, хэрэглэгчийн сэтгэл ханамжийг хангахад чиглэгддэг.

  • Баталгаат хугацаа: Энэхүү бүтээгдэхүүн нь 12 сарын баталгаат хугацаатай.
  • Буцаах бодлого: A 7-day return policy is applicable.
  • Согог: Returns are accepted for defects.

For technical assistance, warranty claims, or any product-related inquiries, please contact WOLFBOX customer support:

Image showing WOLFBOX customer service information, including 12 months warranty, 7 days return policy, return on defects, email service@wolfbox.com, and phone number +1 888 296 8399.

Figure 5: WOLFBOX Warranty and Service Information

Холбогдох баримт бичиг - T10 Plus/T10

Урьдчилсанview WOLFBOX Mirror Dash Cam Troubleshooting Guide & FAQs
Comprehensive troubleshooting guide and frequently asked questions for the WOLFBOX mirror dash cam. Resolve issues with rear camera detection, screen freezing, battery drain, GPS, and installation. Find support contact information and product details.
Урьдчилсанview WOLFBOX Толин тусгал камерын талаар байнга асуудаг асуултууд болон алдааг олж засварлах гарын авлага
WOLFBOX толин тусгал хяналтын камерын суурилуулалт, нийтлэг асуудлууд, GPS болон G840S зэрэг загваруудын хэрэглэгчийн үйлчилгээний талаарх дэлгэрэнгүй түгээмэл хэрэглэгддэг мэдээлэл болон алдааг олж засварлах гарын авлага.
Урьдчилсанview WOLFBOX T10 мэдрэгчтэй дэлгэцтэй, урсгалын тольтой, хос камертай хэрэглэгчийн гарын авлага
Энэхүү хэрэглэгчийн гарын авлагад WOLFBOX T10 мэдрэгчтэй дэлгэцтэй урсгалын толь бүхий хос камерын дэлгэрэнгүй зааврыг оруулсан болно. Энэ нь камер болон дэлгэцийг хамарна.view, SD карт болон камер суурилуулах, цэсний тохиргоо, зогсоолын горим болон GPS зэрэг янз бүрийн функцууд, техникийн үзүүлэлтүүд болон баталгаат хугацааны мэдээлэл.
Урьдчилсанview WOLFBOX G850 Pro Mirror Dash Cam хэрэглэгчийн гарын авлага
WOLFBOX G850 Pro Mirror Dash Cam-ийн хэрэглэгчийн дэлгэрэнгүй гарын авлага, GPS болон Smart Drive-тай энэхүү 4K камерын онцлог, суурилуулалт, ажиллагаа, алдааг олж засварлах талаар дэлгэрэнгүй бичсэн.
Урьдчилсанview WOLFBOX i17 Dash Cam хэрэглэгчийн гарын авлага - Суурилуулалт, онцлог, алдааг олж засварлах
WOLFBOX i17 хос суваг камерын хэрэглэгчийн дэлгэрэнгүй гарын авлага. Суулгац, 4K бичлэг, WiFi холболт, зогсоолын дэлгэц, GPS болон алдааг олж засварлах зэрэг функцуудын талаар мэдэж аваарай.
Урьдчилсанview WOLFBOX i03 Mini Dash Cam хэрэглэгчийн гарын авлага
Бүтээгдэхүүнийг хамарсан WOLFBOX i03 Mini Dash Cam-ийн цогц хэрэглэгчийн гарын авлагаview, техникийн үзүүлэлтүүд, суурилуулалт, ашиглалт, алдааг олж засварлах.