Vinsetto Electric Height Adjustable Standing Desk

Танилцуулга

This instruction manual provides essential information for the safe assembly, operation, and maintenance of your Vinsetto Electric Height Adjustable Standing Desk. Please read this manual thoroughly before use and retain it for future reference.

Figure 1: Vinsetto Electric Height Adjustable Standing Desk

Аюулгүй байдлын мэдээлэл

Анхааруулга:

• To prevent potential hazards, ensure the desk's 'Anti-Collision System' is functioning properly to avoid collisions with other furniture or objects while adjusting.
• Do not overload the desk beyond its weight capacity of 154 lbs (70 kg) to avoid overheating and damage.
• Always follow the assembly instructions and securely anchor the desk if required.
• Ашиглалтын явцад хүүхэд, тэжээвэр амьтдыг ширээнээс хол байлга.
• Ensure all cables are properly managed to prevent tripping hazards or damage during height adjustments.

Багцын агуулга

Угсрахаасаа өмнө доор жагсаасан бүх эд ангиуд байгаа бөгөөд гэмтэлгүй эсэхийг шалгаарай. Хэрэв ямар нэг эд анги дутуу эсвэл гэмтсэн бол хэрэглэгчийн дэмжлэгтэй холбоо барина уу.

• Desktop Panels (Main and L-shaped extension)
• Ширээний хөл (2)
• Support Beams (Horizontal bars)
• Цахилгаан мотор ба хяналтын хайрцаг
• Control Panel with Memory Buttons
• Тохируулах боломжтой хөлийн дэвсгэр
• Чихэвчний дэгээ
• Cable Management Tray/Clips
• Угсралтын тоног төхөөрөмж (Эрэг, Аллен түлхүүр гэх мэт)
• Цахилгаан адаптер ба кабель

Figure 2: Desk components laid out for assembly.

Тохируулах заавар

Follow these steps carefully for proper assembly. While the video below demonstrates assembly for a similar L-shaped desk, the general principles and component connections apply to your 54" model.

1. Ширээний самбаруудыг угсрах: Connect the main desktop panels using the provided dowels and fasteners. Ensure they are securely aligned.
2. Ширээний хөлийг бэхлэх: Secure the desk legs to the desktop frame using the designated screws. Ensure the motor is correctly positioned on one of the legs.
3. Дэмжлэгийн дам нурууг суурилуулах: Attach the horizontal support beams between the legs. Pay attention to the orientation of the middle hole for the sync rod.
4. Connect Sync Rod: Insert the retractable end of the sync rod into the hole of the leg without the motor. Connect the other end to the metal rod of the leg with the motor. Ensure the small black screws on the sync rod accessory are facing upwards. If not, turn the sync rod as shown in the video.
5. Бүх боолтыг бэхлэх: Double-check that all screws are tightened before proceeding.
6. Install Cable Management and Accessories: Attach the cable management tray and headphone hook to the underside of the desktop.
7. Connect Control Panel and Power: Connect the control panel and power adapter to the control box. Route cables neatly using the cable management features.
8. Ширээ эргүүлэх: Тусламжийн тусламжтайгаар угсарсан ширээг босоо байдлаар болгоомжтой эргүүлээрэй.

Figure 3: Desk dimensions for planning your workspace.

Ашиглалтын заавар

Your Vinsetto Electric Height Adjustable Standing Desk features intuitive controls for seamless height adjustments and personalized settings.

Өндөр тохируулга

-г ашиглана уу Дээш (▲) болон Доош (▼) buttons on the control panel to raise or lower the desk to your desired height. The LED display will show the current height.

Санах ойн урьдчилсан тохиргоо

The desk offers 4 memory preset options to save your preferred sitting and standing heights:

1. Дээш/Доошоо товчийг ашиглан ширээгээ хүссэн өндрөөрөө тохируулна уу.
2. дээр дарна уу 'М' button (or similar memory set button, if present) followed by one of the numbered preset buttons (1, 2, 3, or 4). The display will confirm the setting.
3. To recall a saved height, simply press the corresponding numbered preset button.

Мөргөлдөөнөөс хамгаалах систем

The integrated anti-collision system is designed to prevent damage by stopping the desk's movement if it encounters an obstacle during adjustment. If the desk stops unexpectedly, check for obstructions and clear them before resuming operation.

Figure 4: Smart Control Panel for height adjustment and memory presets.

Figure 5: Anti-Collision System in action.

Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь таны зогсож буй ширээний урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.

• Цэвэрлэгээ: Ширээний гадаргууг зар сурталчилгаагаар арчихamp or dry cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Кабелийн менежмент: Periodically check and reorganize cables to prevent tangling or interference with the desk's movement.
• Шургийн битүүмжлэл: Every few months, check all assembly screws and tighten them if necessary to maintain stability.
• Моторын үзлэг: Ensure the motor and moving parts are free from dust and debris. Do not attempt to lubricate internal motor components.

Figure 6: Single electric motor for smooth height adjustments.

Алдааг олж засварлах

Хэрэв та ширээн дээрээ асуудалтай тулгарвал дараах нийтлэг шийдлүүдийг үзнэ үү.

• Ширээ хөдөлдөггүй: Check all power connections. Ensure the power adapter is securely plugged into both the wall outlet and the control box.
• Дэлгэц дээрх алдааны код: Refer to the specific error code in the full user manual (if provided separately) or contact customer support. Often, a power cycle (unplugging and replugging) can resolve minor electronic glitches.
• Anti-Collision System Triggering Frequently: Ensure there are no objects in the path of the desk's movement. The system's sensitivity might be adjustable in some models; consult the full manual for details.
• Unstable or Wobbly Desk: Check that all assembly screws are tight. Ensure the adjustable foot pads are properly leveled on an even floor.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

This Vinsetto Electric Height Adjustable Standing Desk comes with a Хязгаарлагдмал баталгаат хугацаа. The manufacturer's warranty for parts and labor is 90 хоног худалдан авсан өдрөөс.

For warranty claims, technical assistance, or to report missing/damaged parts, please contact Vinsetto customer support through your retailer or the official Vinsetto website. Please have your model number (920-072V81) and proof of purchase ready.