1. Танилцуулга
This manual provides essential information for the safe and efficient operation of your Innosilicon T3+ BTC SHA-256 ASIC Miner 57TH. Please read this manual thoroughly before setting up and operating the device to ensure optimal performance and longevity.
An image showing the Innosilicon T3+ ASIC Miner, a rectangular white unit with cooling fans visible on one side and power connections on the other.
2. Аюулгүй байдлын мэдээлэл
Төхөөрөмжийг гэмтээх, гэмтээхээс сэргийлэхийн тулд дараах аюулгүй байдлын арга хэмжээг дагаж мөрдөнө үү.
- Бүх цахилгааны холболтыг зөв газардуулах.
- Do not operate the miner in environments with high humidity or extreme temperatures outside the specified range (0-40°C).
- Maintain adequate ventilation around the device to prevent overheating.
- Агаарын оролт, гаралтыг хааж болохгүй.
- Засвар, цэвэрлэгээ хийхээс өмнө цахилгааныг салга.
- Only use the provided power supply unit (PSU) or a compatible, certified replacement.
- Хүүхдийн гар хүрэхгүй газар хадгална.
3. Багцын агуулга
Бүх бүрэлдэхүүн хэсгүүд багцад байгаа эсэхийг шалгана уу:
- Innosilicon T3+ BTC SHA-256 ASIC Miner 57TH
- Integrated Power Supply Unit (PSU)
- Цахилгаан кабель (бүс нутгийн онцлогт тохирсон)
- Ethernet Cable (optional, may not be included)
4. Тохиргоо
4.1 Байгаль орчны асуудал
The T3+ miner requires a stable and controlled environment for optimal performance and longevity. Ensure the operating temperature is between 0-40°C and the humidity is low. A dedicated mining farm with proper cooling and a dust filter environment is highly recommended to prevent dust accumulation and maintain efficient operation.
4.2 Физик байрлал
Place the miner on a stable, flat surface. Ensure there is sufficient space around the device for proper airflow, especially around the cooling fans. Do not place the miner near heat sources or in enclosed spaces.
4.3 Цахилгааны холболт
- Connect the power cable to the integrated PSU on the miner.
- Plug the other end of the power cable into a grounded electrical outlet. The miner operates at approximately 3300W (+/- 10%) and requires a stable power source with a maximum input voltage of 240 Volts. Ensure your electrical infrastructure can support this load.
4.4 Сүлжээний холболт
- Connect one end of an Ethernet cable to the Ethernet port on the miner.
- Ethernet кабелийн нөгөө үзүүрийг сүлжээний чиглүүлэгч эсвэл шилжүүлэгчдээ холбоно уу.
- Ensure your network provides a stable internet connection for mining operations.
5. Ашиглалтын заавар
5.1 Анхдагч асаалттай
Once all connections are secure, power on the miner. The fans will start, and the device will begin its boot sequence. This may take a few minutes.
5.2 Тохиргоо
The Innosilicon T3+ typically uses a web-based interface for configuration. To access it:
- Determine the IP address of your miner. This can often be found through your router's connected devices list or by using an IP scanner tool on your network.
- Нээлттэй a web browser on a computer connected to the same network and enter the miner's IP address in the address bar.
- Log in using the default credentials (refer to the manufacturer's documentation or common default credentials for Innosilicon devices).
- Configure your mining pool settings (URL, Worker, Password) within the web interface. The T3+ is designed for SHA-256 algorithm mining.
- Save the settings and restart the miner if prompted.
5.3 Гүйцэтгэлийг хянах
Regularly monitor the miner's performance through its web interface. Key metrics to observe include:
- Хэшрат: Aim for the specified 57TH/s (+/-6%). Fluctuations may indicate issues.
- Температур: Ensure the operating temperature remains within safe limits to prevent damage to the ASIC chips.
- Сэнсний хурд: Verify fans are operating correctly and at appropriate speeds.
- Ажиллах хугацаа: Monitor continuous operation.
6. Засвар үйлчилгээ
Regular maintenance ensures the longevity and efficiency of your T3+ miner:
- Тоос арилгах: Periodically clean the miner, especially the fans and heatsinks, to prevent dust buildup. Dust can impede airflow and lead to overheating. Use compressed air or a soft brush. Ensure the device is powered off and unplugged before cleaning.
- Байгаль орчны шалгалт: Continuously monitor the ambient temperature and humidity of the operating environment. Adjust cooling solutions as needed to maintain optimal conditions.
- Кабелийн үзлэг: Regularly inspect all power and network cables for any signs of wear or damage. Replace damaged cables immediately.
7. Алдаа засах
Энэ хэсэгт танд тулгарч болох нийтлэг асуудлуудыг авч үзэх болно:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Miner does not power on | No power, faulty cable, PSU issue | Check power cable connection, test outlet, ensure PSU is connected correctly. |
| Low Hashrate / No Hashrate | Incorrect pool settings, network issue, overheating, faulty hashboard | Verify pool settings, check network connection, ensure proper cooling, restart miner. If issue persists, contact support. |
| Хэт халалт | Insufficient ventilation, dust buildup, fan failure | Improve airflow, clean dust from fans/heatsinks, check fan operation. |
| Нэвтрэх боломжгүй web интерфейс | Incorrect IP address, network connectivity issue, miner not booted | Verify IP address, check Ethernet cable, ensure miner is fully booted. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Innosilicon customer support.
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын нэр | T3+ |
| Алгоритм | SHA-256 |
| Хэшрейт | 57 TH/s (±6%) |
| Эрчим хүчний хэрэглээ | 3300W (±10%, normal mode, PSU efficiency: 93%, temperature 25°C) |
| Гаралтын ватtage | 3300 ватт |
| Хамгийн их оролтын эзлэхүүнtage | 240 вольт |
| Хэмжээ (L×W×H) | 338 мм x 207 мм x 293 мм |
| Зүйлийн жин | 12.3 KG (approx. 30 pounds) |
| Хөргөх арга | Агаар хөргөх |
| Ашиглалтын температур | 0-40 хэм байна |
| Тохиромжтой төхөөрөмжүүд | Personal Computer (for configuration/monitoring) |
9. Баталгаат хугацааны мэдээлэл
For detailed warranty terms and conditions, please refer to the official Innosilicon website or the warranty card included with your purchase. Typically, warranty coverage addresses manufacturing defects. Any unauthorized modifications, improper installation, or operation outside of specified environmental conditions may void the warranty.
10. Хэрэглэгчийн дэмжлэг
If you require technical assistance, have questions about your miner, or need to report an issue, please contact Innosilicon customer support through their official channels. Have your product model (T3+) and serial number ready when contacting support for faster service.
You can typically find support contact information on the official Innosilicon webсайт: www.innosilicon.com
