VEDINDUST HDMI Splitter Extender 1x2 User Manual

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and troubleshooting of the VEDINDUST HDMI Splitter Extender 1x2. This device allows you to split one HDMI signal into two identical signals and extend them up to 50 meters (165 feet) over a single Cat5e/6/7 Ethernet cable, supporting 1080p resolution. It features EDID preset management and Power Over Cable (POC) technology, requiring power only at the Transmitter (TX) unit.

2. Багцын агуулга

Сав баглаа боодлыг онгойлгохдоо бүх зүйлс байгаа бөгөөд сайн нөхцөлд байгаа эсэхийг шалгана уу.

• 1x HDMI Extender Splitter (Transmitter Unit - TX)
• 2x HDMI Extender Receivers (RX Units)
• 1x 12V Power Adapter (for TX unit)
• 1x Pair of Fixed Hangers
• 1x хэрэглэгчийн гарын авлага

Image: Contents of the VEDINDUST HDMI Splitter Extender package, showing the main transmitter unit, two receiver units, power adapter, mounting brackets, and user manual.

3. Үндсэн шинж чанарууд

• HDMI Splitter Extender: Splits one HDMI signal to two outputs and extends up to 50m (165ft) over Cat5e/6/7 cable.
• EDID Preset Management: Supports various EDID presets to optimize compatibility between source and display.
• Power Over Cable (POC): Only the Transmitter (TX) unit requires a 12V power supply; Receiver (RX) units are powered via the Ethernet cable.
• No Compression Transmission: Supports resolutions up to 1920x1200@60Hz and 1080p@60Hz.
• Аудио форматын дэмжлэг: PCM / DTS / DSD.
• Автомат EQ: Built-in automatic equalization algorithm for stable transmission over varying cable lengths.
• Recommended Cable Lengths: Cat6/7 - 50m, Cat5e - 40m, Cat5 - 30m.

4. Техникийн үзүүлэлтүүд

5. Product Diagrams

Зураг: Дууслааview of the VEDINDUST HDMI Splitter Extender system, showing the main transmitter unit and two compact receiver units.

Зураг: Нарийвчилсан view of the Transmitter (TX) unit's front panel, indicating the ON/OFF switch, Power indicator, and HDMI input indicator.

Зураг: Нарийвчилсан view of the Transmitter (TX) unit's rear panel, showing RJ45 outputs (CAT3, CAT4), HDMI loop-out ports (HDMI1, HDMI2), EDID DIP switch, HDMI input, and 12V DC power input.

6. Тохируулах заавар

1. HDMI эх үүсвэрийг TX руу холбоно уу: Connect your HDMI source device (e.g., PC, DVD player, game console) to the HDMI оролт port on the Transmitter (TX) unit using a high-quality HDMI cable.
2. Connect Local Displays (Optional): If you wish to use local displays, connect them to the HDMI 1 болон HDMI 2 loop-out ports on the TX unit.
3. Connect TX to RX Units: -г холбоно уу CAT3 болон CAT4 RJ45 outputs on the TX unit to the respective RJ45 inputs on the two Receiver (RX) units using Cat5e/6/7 Ethernet cables. Ensure the cable lengths are within the recommended limits (50m for Cat6/7, 40m for Cat5e, 30m for Cat5).
4. Connect Remote Displays to RX Units: Connect your remote HDMI display devices (e.g., TVs, projectors) to the HDMI OUT ports on each RX unit using high-quality HDMI cables.
5. Power On TX Unit: Connect the provided 12V power adapter to the DC12V input on the TX unit. The RX units will receive power via the Ethernet cables (POC).
6. Select EDID Mode: -ийг тохируулна уу EDID DIP шилжүүлэгч on the TX unit according to your display and audio requirements. Refer to the EDID Mode section for detailed settings.
7. Холболтуудыг баталгаажуулах: Ensure all cables are securely connected. Power on all connected devices.

Image: A schematic diagram illustrating the connection process, showing an HDMI source connected to the TX unit, which then connects to two local displays and two remote RX units via Cat5e/6/7 cables, leading to two remote displays.

Зураг: Хуучинample setup showing the VEDINDUST HDMI Splitter Extender used in a conference room environment, connecting a laptop to multiple displays via the extender system.

7. Ашиглалтын заавар

7.1 Асаах/унтраах

• Ensure the 12V power adapter is connected to the TX unit.
• -г ашиглана уу ON/OFF switch on the front panel of the TX unit to power the system on or off.
• The Power indicator LED on the TX unit will illuminate when powered on.

7.2 EDID Mode Selection

The EDID (Extended Display Identification Data) DIP switch allows you to select the optimal video and audio format for your connected displays. This helps ensure compatibility and the best possible output quality.

Image: Close-up of the EDID DIP switch on the Transmitter unit, showing the three switches labeled 1, 2, 3 and their ON/OFF positions.

Refer to the table below for common EDID settings:

Note: "0" typically means the switch is in the OFF/down position, and "1" means the ON/up position. If you experience display issues, try different EDID settings or use the "Copy HDMI OUT 1 EDID" mode if a local display is connected to HDMI OUT 1.

8. Засвар үйлчилгээ

• Төхөөрөмжийг нарны шууд тусгал, дулааны эх үүсвэрээс хол, сэрүүн, хуурай газар хадгална.
• Төхөөрөмжийг чийг, хэт өндөр температурт өртөхөөс зайлсхий.
• Төхөөрөмжийг зөөлөн, хуурай даавуугаар цэвэрлэ. Шингэн болон аэрозол цэвэрлэгч хэрэглэж болохгүй.
• Хэт халалтаас урьдчилан сэргийлэхийн тулд нэгжийн эргэн тойронд зохих агааржуулалтыг хангана.

9. Алдаа засах

• Зураг/Дохио алга:
  • Бүх HDMI болон Ethernet кабелиуд найдвартай холбогдсон эсэхийг шалгаарай.
  • Verify the TX unit is powered on and the power indicator is lit.
  • Check the length and quality of your Ethernet cables. Ensure they meet the recommended specifications (Cat5e/6/7).
  • Try adjusting the EDID DIP switch settings on the TX unit to match your display's capabilities.
  • Test with a different HDMI source or display to rule out device incompatibility.
• Анивчих эсвэл тасалдах дохио:
  • This can often be resolved by adjusting the EDID settings.
  • Ensure Ethernet cables are not running near strong electromagnetic interference sources.
  • Гэмтсэн кабелийг шалгана уу.
• Аудио байхгүй:
  • Verify the EDID setting supports the desired audio format (e.g., 2CH, 5.1CH, 7.1CH).
  • Эх төхөөрөмж болон дэлгэц дээрх аудио тохиргоог шалгана уу.
• POC Not Working (RX unit not powering on):
  • Ensure the TX unit is powered by a 12V adapter. The RX units draw power from the TX unit via the Ethernet cable.
  • Check the Ethernet cable for damage or improper termination.

10. Баталгаат хугацаа ба дэмжлэг

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the VEDINDUST official webсайт. Баталгаат зардлаа авахын тулд худалдан авалтын баримтаа хадгална уу.