SINOTIMER TM618 -7 Days Programmable Weekly Timer Module

1. гаруйview

The SINOTIMER TM618 timer module is designed to automatically control the power supply to various electrical apparatus, such as streetlights, neon signs, billboards, and other appliances, based on a preset time schedule. This digital timer switch features a rechargeable internal battery to maintain program settings during power outages.

Зураг 1.1: Урд view of the TM618 Timer Module.

2. Үндсэн шинж чанарууд

• Авсаархан, орон зай хэмнэсэн загвар.
• Engineered with advanced digital timing technology.
• High functionality for precise time control.
• Built-in rechargeable battery for program retention.
• Multiple ON/OFF programs for weekly scheduling.

3. Тохиргоо ба суурилуулалт

3.1. Утасны диаграм

Proper wiring is crucial for the safe and correct operation of the TM618 timer module. Refer to the diagram below for connection details. Ensure power is disconnected before performing any wiring.

Figure 3.1: Wiring Terminals and Specifications.

• Input (200-250VAC): Connect your main power supply to terminals 1 and 2.
• Output (16 AMP / 250VAC, 20 AMP @30 VDC): Terminals 3, 4, and 5 are for the controlled output. Terminal 3 is common, Terminal 4 is normally open (NO), and Terminal 5 is normally closed (NC). Connect your load to the appropriate terminals based on your application (e.g., between 3 and 4 for normally off, turning on when timed).

3.2. Анхны цэнэглэлт ба батерей

Upon initial power-up, the timer's internal rechargeable battery (40mAh) will begin charging. This battery saves your programmed settings during power interruptions. Allow the unit to be powered for at least 30 minutes for the battery to gain sufficient charge before programming or disconnecting power.

Figure 3.2: Internal 40mAh Rechargeable Battery.

Figure 3.3: TM618 Operating Voltage (220V AC shown).

4. Ашиглалтын заавар

The TM618 timer allows for precise control with up to 16 ON/OFF programs per day or week. The buttons on the front panel are used for setting the time and programs.

Figure 4.1: Timer Module with Manual.

4.1. Одоогийн цагийг тохируулах

1. дээр дарна уу ЦАГ button and hold it.
2. Барьж байхдаа ЦАГ, дарна уу ДОЛОО ХОНОГ долоо хоногийн одоогийн өдрийг тохируулах.
3. Барьж байхдаа ЦАГ, дарна уу ЦАГ одоогийн цагийг тохируулах.
4. Барьж байхдаа ЦАГ, дарна уу MIN одоогийн минутыг тохируулах.
5. -г суллана ЦАГ товч. Одоо цаг нь тавигдсан.

4.2. Асаах/унтраах цагийг програмчлах

Таймер нь 16 хүртэлх АСААХ/УНТРААХ програмыг дэмждэг. Хөтөлбөр бүр АСААХ болон УНТРААХ хугацаанаас бүрдэнэ.

1. дээр дарна уу PROG товчийг нэг удаа дарна уу. Дэлгэц дээр "1 ON" гэж гарч ирнэ.
2. дарна уу ДОЛОО ХОНОГ to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SA, etc.).
3. дарна уу ЦАГ хүссэн ON цагийг тохируулахын тулд.
4. дарна уу MIN хүссэн АСААЛТТАЙ минутыг тохируулахын тулд.
5. дарна уу PROG дахин. Дэлгэц дээр "1 OFF" гэж гарч ирнэ.
6. Энэ хөтөлбөрийн хүссэн УНТРААХ өдөр(үүд), цаг, минутыг тохируулахын тулд 2-4-р алхмуудыг давтана уу.
7. дарна уу PROG to advance to the next program ("2 ON") or to exit programming mode if no more programs are needed.
8. To clear a program, press САНАХ байхад viewing the specific ON or OFF program you wish to clear.

4.3. Гараар хүчингүй болгох

дээр дарна уу ГАРЫН АВЛАГА button to cycle through different operating modes:

• АВТО АСААЛТ: The timer is currently ON and will follow the programmed schedule.
• АВТО УНТрах: The timer is currently OFF and will follow the programmed schedule.
• АСААЛТ: The timer is forced ON, overriding any programs.
• Унтрааж байна: The timer is forced OFF, overriding any programs.

4.4. Recall Function

The САНАХ button (often marked 'R' or 'RESET') is used to clear specific program settings or to reset the timer. A small pinhole button (R) is typically used for a full reset, which clears all programs and resets the time.

5. Засвар үйлчилгээ

5.1. Зайны арчилгаа

The TM618 features a built-in rechargeable battery. To ensure its longevity and proper function, keep the timer connected to power for regular charging. If the timer is stored for extended periods without power, the battery may discharge, requiring a full charge upon reconnection.

5.2. Цэвэрлэгээ

Clean the exterior of the timer module with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing or display. Ensure no liquids enter the device.

6. Алдаа засах

• Дэлгэц хоосон байна: Check power connections. Ensure the unit has been powered for at least 30 minutes to charge the internal battery.
• Ажиллахгүй байгаа програмууд: Verify that the current time is set correctly. Check that the timer is in "AUTO ON" or "AUTO OFF" mode, not forced ON/OFF. Review your programmed ON/OFF times for accuracy.
• Timer not responding to buttons: Perform a full reset using the small 'R' pinhole button. If issues persist, ensure proper power supply.

7. Техникийн үзүүлэлтүүд

7.1. Хэмжээ

Figure 7.1: Front Dimensions.

Figure 7.2: Side Dimensions.

8. Баталгаат хугацаа ба дэмжлэг

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.