Танилцуулга
This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Багцын агуулга
Доор жагсаасан бүх зүйл таны багцад байгаа эсэхийг шалгаарай.
- 1x Wall Mount Bluetooth Ampнастан
- 1x AC адаптер
- 2х шураг
- 2x 6.5-inch In-Ceiling Speakers
- 2x Speaker Wires
- 2x User Manuals (one for amplifier, one for speakers)
Тохиргоо
This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.
1. AmpLifier Суурилуулалт
Ханан доторх amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.
- Ханыг бэлтгэх: Use the provided template (if applicable) to mark and cut an opening in the wall for the ampнастан.
- Цахилгааны кабелийг холбох: Connect the 12V DC power cable to the designated two-pin connector on the back of the ampамьд модуль.
- Аудио кабелийг холбох: Connect the audio cable to the three-pin connector on the back of the ampамьд модуль.
- Аюулгүй Ampамь нас: -г оруулна уу amplifier module into the wall opening and secure it using the provided screws.
- Нүүрний хавтанг хавсаргах: Place the decorative faceplate over the installed amplifier and secure it.
2. Чанга яригч суурилуулах
The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.
- Mark Cutout: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
- Тайрах нээлт: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
- Торыг зайлуулах: Gently remove the magnetic grille from the front of each speaker.
- Чанга яригчийг холбох: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
- Чанга яригч оруулах: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
- Cl -ийг чангалamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
- Replace Grille: Reattach the magnetic grille to the speaker.
3. Утасны диаграм
Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).
4. Эрчим хүчний холболт
Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the amplifier will illuminate.
Video: This video demonstrates the unboxing, wiring, Bluetooth pairing, and installation process for the Herdio 6.5-inch Bluetooth Ceiling Speakers Set.
Ашиглалтын заавар
Learn how to use your Herdio ceiling speaker system.
1. Асаах/унтраах, дууны түвшний хяналт
Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.
2. Bluetooth хослол
After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.
3. Оруулах сонголт
Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.
4. USB функц
The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).
5. Микрофоны оролт
Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.
Засвар үйлчилгээ
To ensure the longevity and optimal performance of your Herdio ceiling speakers and ampөргөгч бол дараах засвар үйлчилгээний зааврыг дагаж мөрдөнө үү.
- Цэвэрлэгээ: Цэвэрлэхийн тулд зөөлөн, хуурай даавуу ашиглана уу amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Тоос арилгах: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
- Байгаль орчны нөхцөл: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
- Утасны үзлэг: Бүх утаснуудын холболтыг найдвартай, зэврэлт, эвдрэлээс хамгаалахын тулд үе үе шалгаж байгаарай.
Алдааг олж засварлах
If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:
- Эрчим хүчгүй:
- Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
- Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
- Өөр төхөөрөмжийг залгах замаар цахилгаан залгуур ажиллаж байгаа эсэхийг шалгана уу.
- Чанга яригчаас чимээ гарахгүй:
- Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
- Ensure the volume knob on the ampөргөгч асаалттай байна.
- Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
- If using Bluetooth, ensure your device is paired and playing audio.
- If using AUX or MIC, ensure the external device is connected and functioning correctly.
- Bluetooth холболтын асуудал:
- -ийг баталгаажуулах amplifier is in Bluetooth pairing mode (blue light flashing).
- Make sure your Bluetooth device is within the 30+ feet wireless range.
- Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
- Хоёуланг нь дахин эхлүүлнэ үү ampөргөгч болон таны Bluetooth төхөөрөмж.
- Гажуудсан дуу:
- Хоёр талын дууны түвшинг бууруулна уу ampөргөгч болон таны аудио эх үүсвэрийн төхөөрөмж.
- Чанга яригчийн утсан холболтыг сул утас эсвэл богино холболт байгаа эсэхийг шалгана уу.
- Ensure the audio source is not overdriven or producing distorted signals.
Үзүүлэлтүүд
| Брэнд | Гердио |
| Загварын нэр | HCS 818 |
| Чанга яригчийн төрөл | Woofer, Tweeter |
| Чанга яригчийн хэмжээ | 6.5 инч |
| Чанга яригчийн хамгийн их гаралтын чадал | 320 ватт |
| Эсэргүүцэл | 8 Ом |
| Давтамжийн хариу үйлдэл | 20 KHz (Note: This is likely the upper limit, typical range is broader) |
| Холболтын технологи | Туслах, Bluetooth, USB |
| Утасгүй холбооны технологи | Bluetooth |
| Bluetooth хүрээ | 30 фут |
| Оролтын хэмжээtage | 120 вольт |
| Эрчим хүчний эх үүсвэр | Утастай цахилгаан |
| Суурилуулах төрөл | Усанд шумбах, таазны бэхэлгээ |
| Product Dimensions (Ampилүү амьд) | 9.25"D x 9.25"W x 4.13"H (Note: This dimension seems to be for the speaker, not the ampнастан. Amplifier is typically smaller, as shown in images.) |
| Материал | Акрилонитрил бутадиен стирол (ABS) |
| Усны хамгаалалттай | ХУДАЛ (Усанд тэсвэртэй биш) |
| Зүйлийн жин | 9.08 pounds (Total package weight) |
Баталгаат хугацааны мэдээлэл
The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Ampөргөгч нь а-тай хамт ирдэг Хязгаарлагдмал баталгаат хугацаа. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.
Дэмжлэг
For further assistance, technical support, or inquiries regarding your Herdio product, please visit the official Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio webсайт.
