Antec NX700

Antec NX700 Mid-Tower ATX Gaming Case User Manual

Model: NX700 | Brand: Antec

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of your Antec NX700 Mid-Tower ATX Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage.

Antec NX700 Mid-Tower ATX Gaming Case

Figure 1: Antec NX700 Mid-Tower ATX Gaming Case overview.

Гол онцлогууд

  • 3D Geometric Mesh Front Panel: Designed for optimal airflow and aesthetic appeal.
  • Included ARGB Fans: Comes with two 185mm ARGB fans in the front and one 120mm ARGB fan in the rear for effective cooling and customizable lighting.
  • Хажуугийн шилэн хавтан: A 4mm thick tempered glass side panel provides a clear view таны дотоод бүрэлдэхүүн хэсгүүдийн.
  • Өргөн хүрээтэй радиаторын дэмжлэг: Supports up to a 360mm radiator for advanced liquid cooling solutions.
  • Versatile I/O Panel: Features Power, LED control button, Reset, 2 x USB 3.0 ports, and MIC/HD-AUDIO jacks.
  • Эх хавтангийн нийцтэй байдал: ATX, Micro-ATX болон Mini-ITX эх хавтангуудыг дэмждэг.
3D Geometric Mesh Front Panel

Figure 2: Close-up of the 3D geometric mesh front panel, designed for enhanced airflow.

2. Тохиргоо ба суурилуулалт

Follow these steps to install your components into the Antec NX700 case.

2.1 Included Fans Installation

The case comes pre-installed with two 185mm ARGB fans at the front and one 120mm ARGB fan at the rear. Ensure these fans are properly connected to your motherboard or a fan controller for power and ARGB functionality.

Included ARGB Fans

Figure 3: Illustration of the included 2 x 185mm ARGB front fans and 1 x 120mm ARGB rear fan.

2.2 Cooling System Configuration

The NX700 supports various fan and radiator configurations to optimize cooling performance.

  • Урд: Supports 3 x 120mm, 3 x 140mm, or 2 x 185mm fans. Radiator support up to 360mm.
  • Топ: Supports 2 x 120mm or 2 x 140mm fans. Radiator support up to 280mm.
  • Арын: Supports 1 x 120mm or 1 x 140mm fan. Radiator support up to 140mm.
  • Цахилгаан хангамжийн бүрээс: Supports 2 x 120mm fans.
Сэнс ба радиаторыг дэмжих схем

Figure 4: Diagram illustrating fan and radiator mounting options within the case.

Radiator Installation Diagram

Figure 5: Illustration showing space for a 360mm radiator installation at the front, even with 185mm fans.

2.3 Бүрэлдэхүүн хэсгүүдийн суурилуулалт

The NX700 offers ample space for various components. Ensure all cables are routed neatly for optimal airflow and aesthetics.

  • Эх хавтан: Supports ATX motherboards (up to 305mm x 275mm).
  • CPU хөргөгч: Хамгийн дээд өндөр нь 170 мм.
  • График карт (GPU): Хамгийн их урт нь 340 мм.
  • Эрчим хүчний хангамж (PSU): Supports PSUs up to 200mm (with HDD) or 365mm (without HDD).
  • Хадгалах: 2 x 3.5" HDD / 2.5" SSD (convertible) and 4 x 2.5" SSDs.
Internal Component Layout

Figure 6: Internal layout showing maximum dimensions for CPU cooler, GPU, and motherboard support.

Дотоод view with installed components

Зураг 7: Дотоод view of the NX700 case with various components installed, demonstrating space and layout.

2.4 Video Guide for Assembly

Watch this official video for a visual guide on the Antec NX700 Mid-Tower ATX Gaming Case features and assembly process.

Видео 1: Албан ёсоор дууссанview and assembly guide for the Antec NX700 Mid-Tower ATX Gaming Case.

3. Ашиглалтын заавар

3.1 I/O Panel Functions

The top I/O panel provides convenient access to essential controls and ports.

  • Цахилгаан товч: Системийг асаах эсвэл унтраана.
  • LED удирдлагын товчлуур: Cycles through various ARGB lighting modes for the included fans.
  • Дахин тохируулах товч: Системийг дахин эхлүүлнэ.
  • USB 3.0 портууд (x2): Өндөр хурдны өгөгдөл дамжуулах зориулалттай.
  • MIC/HD-AUDIO Jacks: Чихэвч болон микрофон холбох зориулалттай.
I/O Panel Layout

Зураг 8: Нарийвчилсан view of the top I/O panel with power, LED control, USB 3.0, and audio ports.

3.2 ARGB сэнсний удирдлага

The included ARGB fans can be controlled either via the dedicated LED button on the I/O panel or synchronized with your motherboard's ARGB software.

  1. Using the LED Control Button: Press the LED button on the I/O panel to cycle through pre-programmed lighting effects.
  2. Эх хавтангийн синхрончлол: To sync with your motherboard, connect the ARGB cables from the fans to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to control the lighting.
ARGB Lighting in Antec NX700

Figure 9: The Antec NX700 case showcasing its vibrant ARGB lighting capabilities.

4. Засвар үйлчилгээ

Regular maintenance helps ensure the longevity and optimal performance of your Antec NX700 case.

  • Тоосны шүүлтүүр: Periodically clean the dust filters located at the top and bottom of the case. Gently remove them and use compressed air or a soft brush to clear accumulated dust.
  • Case Exterior: Гадна талын гадаргууг зөөлөн арчиж, damp даавуу. Зүлгүүрийн цэвэрлэгч эсвэл уусгагчаас зайлсхий.
  • Температуртай шилэн хавтан: Clean the tempered glass panel with a microfiber cloth and a glass cleaner designed for electronics. Avoid excessive force or harsh chemicals.
  • Дотоод цэвэрлэгээ: Every few months, open the case and use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

5. Алдаа засах

This section addresses common issues you might encounter with your Antec NX700 case.

5.1 Fans Not Spinning or Lighting Up

  • Эрчим хүчний холболт: Verify that all fan power cables are securely connected to the motherboard fan headers or a fan controller.
  • ARGB холболт: Ensure ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard or the case's LED controller. Incorrect connection (e.g., to a 4-pin 12V RGB header) can damage the LEDs.
  • LED Button Functionality: If using the case's LED button, ensure it is functioning. Try cycling through modes.
  • Эх хавтангийн програм хангамж: If using motherboard sync, check your motherboard's ARGB software for fan control and lighting settings.
  • Molex холбогч: Some fan controllers or hubs may require a Molex connector for power. Ensure this is properly connected to your power supply.

5.2 No Power to System

  • PSU Connection: Ensure the power supply is properly installed and connected to the motherboard and all components. Check that the PSU switch is in the 'ON' position.
  • Урд самбар холбогч: Verify that the front panel power switch cable is correctly connected to the motherboard's front panel header. Refer to your motherboard manual for the correct pinout.

5.3 Missing Motherboard Mounting Stand-offs

While the case includes standard stand-offs, some motherboard layouts (e.g., certain ATX boards) may require additional stand-offs for full support. Ensure all necessary stand-offs are installed to prevent motherboard flex and potential damage.

6. Техникийн үзүүлэлтүүд

Detailed technical specifications for the Antec NX700 Mid-Tower ATX Gaming Case.

ОнцлогТодорхойлолт
БрэндАнтек
ЦувралNX700
Загварын нэрNX700
Загварын дугаар0-761345-81072-2
Кейсийн төрөлДунд цамхаг
Эх хавтангийн нийцтэй байдалATX, Micro ATX, Mini ITX
МатериалSPCC + Plastic, Tempered Glass
Бүтээгдэхүүний хэмжээ (LxWxH)17.32 x 8.66 x 19.37 инч (440 x 220 x 492 мм)
Зүйлийн жин15.84 фунт (7.2 килограмм)
Фэнүүд багтсан2 x 185 мм ARGB (урд), 1 x 120 мм ARGB (хойд)
Урд фенүүдийн дэмжлэг3 х 120 мм / 3 х 140 мм / 2 х 185 мм
Шилдэг фенүүдийн дэмжлэг2 х 120 мм / 2 х 140 мм
Арын сэнсний дэмжлэг1 х 120 мм / 1 х 140 мм
PSU Shroud Fan Support2 х 120 мм
Урд радиаторын дэмжлэг360 мм хүртэл
Дээд радиаторын дэмжлэг280 мм хүртэл
Арын радиаторын дэмжлэг140 мм хүртэл
CPU хөргөгчийн хамгийн их өндөр170 мм
GPU-ийн хамгийн их урт340 мм
PSU-ийн хамгийн их урт200mm (with HDD) / 365mm (without HDD)
Drive Bays2 x 3.5" HDD / 2.5" SSD (convertible), 4 x 2.5" SSD
I/O самбарPower, LED Control, Reset, 2 x USB 3.0, MIC/HD-AUDIO
Antec NX700 Case Dimensions

Figure 10: Dimensions of the Antec NX700 Mid-Tower ATX Gaming Case.

Арын View of Antec NX700

Зураг 11: Ар талд view of the Antec NX700, showing expansion slots and fan mount.

7. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or to inquire about replacement parts, please visit the official Antec website or contact Antec customer service. Keep your proof of purchase for warranty claims.

Антек албан ёсны Webсайт: www.antec.com

Холбогдох баримт бичиг - NX700

Урьдчилсанview Antec DP505 PC Case - EATX дэмжлэгтэй тоглоомын дунд цамхаг
Antec DP505 нь EATX дэмжлэг, Type-C Gen2, ARGB сэнс, PWM удирдлага, радиаторын дэмжлэг, GPU хаалт болон хатууруулсан шил бүхий цагаан өнгийн тоглоомын дунд зэргийн цамхагтай компьютерийн гэр юм.
Урьдчилсанview Antec NX292 ATX Gaming PC Case - Гарын авлага ба түүнээс дээшview
Хэрэглэгчийн гарын авлага ба түүнээс дээшview Antec NX292 ATX дунд цамхаг тоглоомын компьютерийн гэрт зориулагдсан бөгөөд RGB сэнс, хатууруулсан шилэн хажуугийн самбар зэрэг онцлог шинж чанаруудыг нь онцлон тэмдэглэж, HDD болон SSD хадгалах төхөөрөмжтэй.
Урьдчилсанview Antec Flux Mid Tower ATX PC Case хэрэглэгчийн гарын авлага
Antec Flux Mid Tower ATX PC Case-ийн дэлгэрэнгүй хэрэглэгчийн гарын авлага, өндөр хүчин чадалтай компьютер угсрах онцлог, техникийн үзүүлэлт, суурилуулах гарын авлага, засвар үйлчилгээний зөвлөмжийг багтаасан болно.
Урьдчилсанview Antec P20C Mid Tower Gaming PC Case - Хэрэглэгчийн гарын авлага болон суурилуулах гарын авлага
Antec P20C дунд цамхагтай компьютерын гэрт зориулсан цогц хэрэглэгчийн гарын авлага. Үүний онцлог шинж чанарууд, эх хавтангийн суурилуулах алхамууд, хадгалах төхөөрөмж, хөргөлт, GPU болон урд самбарын оролт/гаралтын талаар мэдэж аваарай. Техникийн үзүүлэлтүүд болон засвар үйлчилгээний зөвлөмжийг багтаасан болно.
Урьдчилсанview Antec NX291 ATX Tower Тоглоомын Гэр - Хэрэглэгчийн Гарын Авлага
Хэрэглэгчийн гарын авлага болон бүтээгдэхүүн дууссанview Antec NX291 ATX Tower тоглоомын гэрт зориулсан, тогтмол горимтой RGB сэнс, хатууруулсан шилэн хажуугийн самбар, төсөвт ээлтэй дизайн зэрэг онцлогуудыг нарийвчлан харуулсан.
Урьдчилсанview Antec C8 ARGB PC Case хэрэглэгчийн гарын авлага
Antec C8 ARGB компьютерын гэрний дэлгэрэнгүй хэрэглэгчийн гарын авлага, угсралт, онцлог, техникийн үзүүлэлтүүд болон компьютер бүтээгчдэд зориулсан ARGB гэрэлтүүлгийн хяналтыг хамарсан.