1. Танилцуулга
This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Багцын агуулга
The Parani M10 package typically includes the following components:
- Parani M10 Main Unit
- Утастай микрофон
- Speakers (pair)
- Дуулга Clamp Иж бүрдэл
- USB цэнэглэгч кабель
- Чанга яригч дэвсгэр
- Чанга яригчдад зориулсан дэгээ ба гогцоо бэхэлгээ
- Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.
3. Бүтээгдэхүүн дууссанview
Familiarize yourself with the main unit's components and controls.
Figure 3.1: Parani M10 Main Unit Controls and Ports.
- Jog Dial: Used for volume control, menu navigation, and various functions.
- Олон үйлдэлт товчлуур: Primary button for power, pairing, and call management.
- LCD дэлгэц: Shows battery status, volume level, intercom pairing status, and other operational information.
- DC Power Charging & Firmware Upgrade Port: For charging the device and updating its firmware.
- Speakers and Microphone Port: Connection point for the wired speakers and microphone.
4. Тохиргоо ба суурилуулалт
The Parani M10 is designed for easy installation on most motorcycle helmets.
4.1 Attaching the Main Unit to the Helmet
- Choose a suitable location on the left side of your helmet for the clamp иж бүрдэл.
- Loosen the screws on the helmet clamp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
- Slide the Parani M10 main unit onto the clamp байрандаа орох хүртэл.
Figure 4.1: Parani M10 unit installed on a helmet.
4.2 Чанга яригч болон микрофон суурилуулах
- Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
- Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
- Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
- Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
- Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.
4.3 Төхөөрөмжийг цэнэглэх
Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.
5. Ашиглалтын заавар
5.1 Асаах/унтраах
- Асаах: Олон үйлдэлт товчлуурыг 1 секундын турш барина уу.
- Унтраах: Олон үйлдэлт товчлуурыг 5 секундын турш дарна уу.
5.2 Дууны хяналт
Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.
Figure 5.1: LCD display showing pairing status and volume.
5.3 Smartphone Pairing
- With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
- Ухаалаг гар утсан дээрээ Bluetooth тохиргоо руу очоод шинэ төхөөрөмжүүдийг хайгаарай.
- Select "Parani M10" from the list of available devices.
- Once paired, the LED will flash blue, and the LCD will confirm connection.
- You can now listen to music, GPS navigation, and make/receive phone calls through your headset.
5.4 Bluetooth интерком
The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.
- Pairing Intercom:
- Ensure both M10 units are powered on.
- On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- The units will automatically search and pair. Once paired, the LED will flash blue.
- Repeat this process for additional units (up to four total).
- Starting/Ending Intercom Conversation:
- To start an intercom conversation, tap the Jog Dial.
- To end an intercom conversation, tap the Jog Dial again.
5.5 Утасны дуудлага
- Дуудлагад хариулах: Олон үйлдэлт товчлуур дээр дарна уу.
- Дуудлага дуусгах: Олон үйлдэлт товчлуур дээр дарна уу.
- Дуудлагаас татгалзах: Олон үйлдэлт товчлуурыг 2 секундын турш дарна уу.
- Дуут залгах: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).
6. Засвар үйлчилгээ
6.1 Цэвэрлэгээ
Үндсэн нэгжийг зөөлөн арчиж, damp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.
6.2 Батерейны арчилгаа
- Батерейны эрүүл мэндийг хадгалахын тулд төхөөрөмжийг ашиглаагүй байсан ч тогтмол цэнэглээрэй.
- Төхөөрөмжийг хэт өндөр температурт хадгалахаас зайлсхий.
- Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.
6.3 Програм хангамжийн шинэчлэлтүүд
Сенаг үе үе шалгаж байгаарай website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Төхөөрөмж асахгүй байна. | Батерей бага. | Төхөөрөмжийг бүрэн цэнэглэ. |
| Ухаалаг утастай хослуулах боломжгүй. | Device not in pairing mode; smartphone Bluetooth off; interference. | Ensure M10 is in pairing mode (red/blue flashing LED). Turn smartphone Bluetooth off and on. Move away from other Bluetooth devices. |
| Интерком холбогдоогүй байна. | Units not in intercom pairing mode; out of range; already connected to other devices. | Ensure both M10 units are in intercom pairing mode. Reduce distance between units. Disconnect from other Bluetooth devices before intercom pairing. |
| Чанга яригчаас дуу гарахгүй. | Volume too low; speakers not connected properly; faulty speakers. | Increase volume using the Jog Dial. Check speaker connections. Test with another audio source if possible. |
| Микрофон ажиллахгүй байна. | Microphone not connected properly; faulty microphone. | Check microphone connection to the main unit. Ensure microphone is positioned correctly. |
7.1 Үйлдвэрийн тохиргоонд дахин оруулах
If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.
8. Техникийн үзүүлэлтүүд
| Загварын нэр | Парани M10 |
| Bluetooth хувилбар | Bluetooth 5.1 |
| Домофон холбооны хүрээ | Ил задгай газар 1 км (0.6 миль) хүртэл |
| Max Intercom Users | 4 (Parani-only network) |
| Ярилцах цаг | 16 цаг хүртэл |
| Цэнэглэх хугацаа | Ойролцоогоор 2.5 цаг |
| Ашиглалтын температур | -10°C - 55°C (14°F - 131°F) |
| Жин | Ойролцоогоор 60 гр (2.1 унц) |
Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.
9. Баталгаат хугацаа ба дэмжлэг
9.1 Баталгаат хугацааны мэдээлэл
Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena webсайт эсвэл таны бүтээгдэхүүнд багтсан баталгаат карт. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.
9.2 Хэрэглэгчийн дэмжлэг
For technical assistance, troubleshooting, or general inquiries, please visit the official Sena website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.
- Сена Webсайт: www.sena.com
- Парани Webсайт: www.parani.com
