SMALLRIG 3669-CF

SmallRig Advanced Camera Cage Kit Instruction Manual

Model: 3669-CF

1. Танилцуулга

This manual provides detailed instructions for the assembly, operation, and maintenance of the SmallRig Advanced Camera Cage Kit (Model 3669-CF). This kit is designed to enhance stability during handheld shooting and offers a wide range of accessory mounting options for Sony Alpha 7 V, Alpha 7R V, Alpha 7 IV, and Alpha 7 S III cameras.

2. Хайрцагт юу байна

The SmallRig Advanced Camera Cage Kit includes the following components:

  • 1 x Cage
  • 1 x HDMI Cable Tie
  • 1 x Locating Handle for ARRI
  • 1 х хажуугийн бариул
  • 1 x Hex түлхүүр
Contents of the SmallRig Advanced Camera Cage Kit

Image: All components included in the SmallRig Advanced Camera Cage Kit.

3. Тохиргоо ба угсралт

Follow these steps to correctly assemble and attach the cage kit to your camera.

3.1. Camera Preparation

  • Ensure your camera's lens is removed or a small lens is attached to allow clearance during cage installation.
  • For cameras like the Sony Alpha 7S III or Alpha 7 IV, remove the split ring (shoulder strap hook) on the left side of the camera to use the side locking plate.

3.2. Attaching the Camera Cage

  1. Align your Sony Alpha 7 V, A7R V, A7 IV, or A7S III camera with the cage.
  2. Slide the camera into the cage.
  3. Secure the camera to the cage using the integrated 1/4"-20 screw located at the bottom of the cage. Use the provided hex key for tightening.
  4. Depending on your camera model, attach the appropriate side locking plate (one for Alpha 7S III, one for Alpha 7 IV) to prevent twisting. These plates attach to the camera's strap eyelet.
  5. Ensure the camera is firmly seated and does not move within the cage.
SmallRig cage attached to a Sony Alpha camera, showing the three-point locking mechanism.

Image: Three-Point Locking mechanism for securing the camera within the cage.

SmallRig cage with modular design, showing different locking sliders for various Sony Alpha camera models.

Image: Wide compatibility with modular design, illustrating the different locking sliders for various Sony Alpha cameras.

Video: Demonstration of attaching the SmallRig cage to a Sony A7IV camera.

3.3. Attaching the HDMI Cable Clamp

  1. Locate the HDMI cable clamp.
  2. cl-ийг суурилуулamp onto the left side of the cage using the 1/4"-20 screw and two locating pins.
  3. Insert your HDMI cable into the clamp and tighten the thumbscrew to secure it. This prevents accidental disconnections and protects the camera's HDMI port.

Note: This cable clamp is not compatible with Sony Alpha 1. When used on the Alpha 7R V camera, the HDMI Cable Clamp interferes with the synchroterminal interface.

SmallRig HDMI cable clamp attached to the camera cage, securing an HDMI cable.

Image: HDMI Cable Clamp included with the kit, demonstrating its attachment and function.

3.4. Attaching the Top Handle

  1. The top handle attaches to the top of the cage via a standard ARRI locating mount.
  2. Align the handle with the ARRI locating holes on the top of the cage and secure it with the integrated screw.
SmallRig ergonomic top handle with multiple mounting points.

Image: Ergonomic top handle design, showing various threaded holes and cold shoe mount.

3.5. Attaching the Side Handgrip

  1. The side handgrip attaches to the NATO rail on the side of the cage.
  2. cl-ийг сулланаamp on the side handgrip, slide it onto the NATO rail, and tighten the clamp to secure it in your desired position.
  3. The height of the handgrip can be adjusted vertically for optimal comfort.
SmallRig aluminum side handle with silicone grip, showing mounting points and adjustment mechanism.

Image: Aluminum side handle, highlighting its comfortable grip and adjustable mounting.

4. Operating the Camera Cage Kit

The SmallRig Advanced Camera Cage Kit provides enhanced functionality and protection for your camera.

4.1. Enhanced Stability and Handling

  • Дээд бариул: Ideal for low-angle shots and easy carrying. It reduces arm strain during extended shooting sessions.
  • Side Handgrip: Features a silicone insert for a better grip, increasing stability for handheld shooting. It can be adjusted vertically for optimal comfort.

4.2. Multiple Mounting Points

The cage offers various mounting interfaces for attaching accessories:

  • 1/4"-20 Threaded Holes: Numerous points for attaching monitors, magic arms, lights, and other accessories.
  • 3/8"-16 ARRI Locating Holes: Provides secure, anti-twist mounting for ARRI-standard accessories.
  • Хүйтэн гутлын бэхэлгээ: Integrated cold shoe mounts on the cage and handles for microphones, LED lights, and other shoe-mounted accessories.
  • НАТО-гийн төмөр зам: Located on the side of the cage for quick attachment and detachment of NATO-compatible accessories, such as the side handgrip.
  • Strap Slots: Allows for attachment of neck or hand straps (sold separately).
  • QD Socket: For quick-release sling swivels.
SmallRig camera cage highlighting various mounting points including 1/4-20 threads, 3/8-16 ARRI locating holes, cold shoes, and NATO rail.

Image: Multiple mounting points available on the camera cage for various accessories.

4.3. Unobstructed Access

The cage is designed to maintain full access to the camera's controls, buttons, hot shoe, and battery compartment, allowing for quick battery changes without removing the camera from the cage.

SmallRig cage showing access to camera controls and battery door.

Image: The cage design ensures precise holes and accurate calibration for full access to camera controls and battery.

5. Засвар үйлчилгээ

  • Regularly inspect all screws and connections to ensure they are tight. Use the provided hex key for tightening.
  • Clean the cage with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
  • Store the cage in a dry, dust-free environment when not in use.
  • The built-in protective pads should be checked periodically for wear and tear.

6. Алдаа засах

  • Camera not fitting securely: Ensure the correct side locking plate is used for your specific camera model (Alpha 7S III or Alpha 7 IV). Verify that the integrated 1/4"-20 screw at the bottom is fully tightened.
  • HDMI кабель Clamp хөндлөнгийн оролцоо: If using the Alpha 7R V camera, be aware that the HDMI Cable Clamp may interfere with the synchroterminal interface. Adjust placement or consider alternative cable management if necessary. The clamp is not compatible with Sony Alpha 1.
  • Accessories not mounting securely: Check that the accessory's mounting screw or mechanism matches the cage's interface (e.g., 1/4"-20, 3/8"-16 ARRI, cold shoe, NATO rail). Ensure all screws are tightened.

7. Техникийн үзүүлэлтүүд

ОнцлогДэлгэрэнгүй
Загварын дугаар3669-CF
Тохиромжтой байдалSony Alpha 7 V, Alpha 7R V, Alpha 7 IV, Alpha 7 S III
МатериалХөнгөн цагааны хайлш, зэвэрдэггүй ган, силикон
Бүтээгдэхүүний хэмжээс8.33" D x 6.95" W x 5.31" H (211.5 x 176.5 x 135 мм)
Зүйлийн жин1.23 фунт (556 грамм)
ӨнгөХар
Суурилуулах цэгүүд1/4"-20 threads, 3/8"-16 ARRI locating holes, Cold Shoe, NATO Rail, QD Socket

8. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please visit the official SmallRig webсайтаас авах эсвэл тэдний хэрэглэгчийн үйлчилгээтэй холбогдоно уу. Баталгаат хугацааны нэхэмжлэлийн талаар худалдан авалтын баримтаа хадгална уу.

Official SmallRig Store: SmallRig Store on Amazon

Холбогдох баримт бичиг - 3669-CF

Урьдчилсанview Sony Alpha 7R V/IV, 7 IV, 7S III, 1-д зориулсан SmallRig Full Cage 3667B - Ашиглалтын заавар
Sony Alpha 7R V, Alpha 7 IV, Alpha 7S III, Alpha 1, Alpha 7R IV камеруудад зориулагдсан SmallRig 3667B Full Cage-ийн ашиглалтын нарийвчилсан заавар, техникийн үзүүлэлтүүд. Онцлог, аюулгүй байдал, нийцтэй байдал, холбох сонголтуудын талаар мэдэж аваарай.
Урьдчилсанview SmallRig Universal Tripod Dolly CCP2646 камерын тор - Ашиглалтын заавар
Panasonic Lumix GH5, GH5 II, болон GH5S камеруудад зориулагдсан SmallRig Universal Tripod Dolly CCP2646 камерын торны ашиглалтын заавар болон техникийн үзүүлэлтүүд. Онцлог шинж чанаруудад хамгаалалт, дагалдах хэрэгслийн суурилуулалт, аюулгүй байдлын удирдамж багтана.
Урьдчилсанview Sony Alpha 7S III (2999)-д зориулсан жижиг Rig камерын тор - Ашиглалтын заавар
Sony Alpha 7S III камерт зориулсан SmallRig камерын тор (2999 загвар)-ын дэлгэрэнгүй ашиглалтын заавар болон техникийн үзүүлэлтүүд. Суурилуулах цэгүүд, аюулгүй байдлын удирдамж болон бүтээгдэхүүний дэлгэрэнгүй мэдээлэлтэй танилцана уу.
Урьдчилсанview SmallRig Cage for Sony Alpha 9 III (Model 4533) User Manual
User manual for the SmallRig Cage (Model 4533) designed for the Sony Alpha 9 III camera. Provides detailed installation instructions, product features, and specifications.
Урьдчилсанview SmallRig Cage with AirTag Slot for Sony Alpha 7R V/7 IV/7S III
Operating instructions and product details for the SmallRig Cage with AirTag Slot, designed for Sony Alpha 7R V, 7 IV, 7S III, and 1/7R IV cameras. Includes specifications, installation steps, and product components.
Урьдчилсанview Sony Alpha 7 цуврал камеруудад зориулсан SmallRig HawkLock хурдан гаргах тор ба тор иж бүрдэл - Хэрэглэгчийн гарын авлага
Sony Alpha 7 цуврал камеруудад зориулсан SmallRig HawkLock хурдан гаргагч тор болон торны иж бүрдэл (4481, 4538, 4539 загвар) хэрэглэгчийн гарын авлага. Онцлог шинж чанарууд, бүтээгдэхүүний дэлгэрэнгүй мэдээлэл, алхам алхмаар суулгах гарын авлага.