Vividia TVS-507 Дуран тулгуур видео үзлэгийн камерны бороскоп системийн хэрэглэгчийн гарын авлага

1. Бүтээгдэхүүн дууссанview

The Vividia TVS-507 Telescopic Pole Video Inspection Camera is designed for detailed visual inspections in hard-to-reach areas. It features a strong, extendable carbon fiber pole, a high-resolution 5MP camera, and a video viewing system with DVR recording capabilities. This system is ideal for various applications including roof and building inspections, gutter cleaning, and examining areas inaccessible by direct view.

Гол онцлогууд нь:

• Flexible gooseneck camera head with a Φ18mm diameter, extendable up to 5 meters (16 feet).
• 1/3 inch 5MP resolution sensor with a 90° field of view.
• 12 high-intensity white LED lights with adjustable brightness, providing visibility over 5 meters in total darkness.
• 7-inch LCD touchscreen monitor with photo and video recording functions.
• Control box with DVR controls, SD card slot (max 32GB), LED brightness adjustment, and AV/photo selection.
• High-capacity 7500mAh lithium battery for over 5 hours of continuous operation.

Figure 1: The Vividia TVS-507 Telescopic Pole Video Inspection Camera Borescope System, showing the extended pole, monitor, and camera head.

2. Системийн бүрэлдэхүүн хэсгүүд

The Vividia TVS-507 system includes the following main components:

• Телескоп туйл: Extendable carbon fiber pole for reaching elevated or distant areas.
• Waterproof Camera Head: High-resolution 5MP camera with 12 adjustable LED lights, mounted on a flexible gooseneck.
• 7 инчийн LCD мэдрэгчтэй дэлгэц: Бодит цагийн горимд viewing, recording, and playback.
• Хяналтын хайрцаг: Integrated with the monitor, featuring DVR controls, SD card slot, and power management.
• Цэнэглэдэг лити батерей: Provides portable power for extended operation.
• Sturdy Carry Case: For safe transport and storage of the entire system.

Figure 2: Main components of the Vividia TVS-507 system, illustrating the sunshade, camera, pole sections, and monitor.

Figure 3: Detailed structural diagram of the inspection system, highlighting the flexible camera and audio sensor.

3. Тохируулах гарын авлага

3.1 Сав баглаа боодол, анхны үзлэг

Carefully remove all components from the sturdy carry case. Inspect each part for any signs of damage. Ensure all listed components are present.

Figure 4: The system components neatly arranged within the protective carry case.

3.2 Assembling the Pole and Camera

1. Extend the telescopic pole sections by twisting and pulling them to the desired length. Secure each section by twisting in the opposite direction.
2. Attach the flexible gooseneck camera head to the top of the pole. Ensure it is securely fastened.
3. Connect the camera cable to the designated port on the control box/monitor unit.

3.3 Attaching the Monitor and Control Box

1. Mount the 7-inch LCD touchscreen monitor onto the pole using the provided bracket. Adjust the viewхамгийн оновчтой харагдах өнцөг.
2. Ensure all connections between the monitor, control box, and pole are firm.

Figure 5: The 7-inch LCD monitor and control panel, detailing input/output ports and control buttons.

3.4 Inserting the SD Card and Charging the Battery

1. Locate the SD card slot on the control box. Insert a compatible SD card (up to 32GB) for recording photos and videos.
2. Connect the power adapter to the control box and a power outlet to fully charge the lithium battery before first use. The charging indicator will show the battery status.

For a visual guide on assembly and basic operation, please refer to the video below. Note that this video features the TVS-500 model, but the general assembly and operational principles are similar.

Видео 1: Дууслааview of the Vividia Telescopic Pole Inspection Camera (TVS-500 model shown), demonstrating its features and applications. This video provides a general understanding of the system's capabilities.

4. Ашиглалтын заавар

4.1 Асаах/унтраах

To power on the system, press and hold the 'Power ON/OFF' button on the control box until the LCD screen illuminates. To power off, press and hold the same button until the screen shuts down.

4.2 Adjusting Camera and Lighting

• Camera Direction: The flexible gooseneck camera head can be manually bent and adjusted to the desired viewөнцөг.
• LED гэрэл: Use the 'LED brightness adjusting knob' on the control box to increase or decrease the intensity of the camera's LED lights. This helps optimize visibility in varying light conditions.

Figure 6: The flexible camera head, which can be adjusted manually for optimal viewing.

4.3 Видео болон зураг бичих

The system supports both video recording and still image capture. Ensure an SD card is inserted before recording.

1. Солих горимууд: Use the 'AV&photo selection' button to toggle between video and photo modes.
2. Видео бичлэг хийх: In video mode, press the 'Record' button to start recording. Press it again to stop.
3. Зураг авах: In photo mode, press the 'Photo' button to capture a still image.
4. Микрофоны удирдлага: Use the 'On/off MIC control button' to enable or disable audio recording.

Figure 7: The 7-inch LCD screen showing the live camera feed and recording status.

4.4 Тоглуулах ба өгөгдөл дамжуулах

• Төхөөрөмж дээр тоглуулах: Use the 'Play' button and navigation controls on the control box to review recorded videos and photos directly on the monitor.
• Шилжүүлж байна Files: Remove the SD card from the control box and insert it into a computer or compatible device to transfer and view your recorded media.

5. Засвар үйлчилгээ

5.1 Цэвэрлэгээ

• Камерын дарга: Gently wipe the camera lens with a soft, lint-free cloth. For stubborn dirt, use a small amount of lens cleaning solution. Ensure the camera head is dry before storage.
• Monitor and Control Box: Use a dry, soft cloth to clean the monitor screen and control box. Avoid abrasive cleaners or excessive moisture.
• Туйл: Wipe down the telescopic pole with a damp шороо болон хог хаягдлыг арилгахын тулд даавуугаар сайтар хатаана.

5.2 Хадгалалт

When not in use, store the Vividia TVS-507 system in its original sturdy carry case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the pole is fully retracted and all components are securely placed to prevent damage.

5.3 Батерейны арчилгаа

To prolong battery life, fully charge the battery before long-term storage and recharge it every 3-6 months if not in regular use. Avoid completely draining the battery frequently.

6. Алдаа засах

7. Техникийн үзүүлэлтүүд

8. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or service inquiries, please contact Vividia customer service. Details can typically be found on the product packaging or the official Vividia webсайт.

Та мөн албан тушаалтан дээр очиж болно VIVIDIA Store on Amazon бүтээгдэхүүний талаарх дэлгэрэнгүй мэдээлэл, дэмжлэгийн эх сурвалжийг авна уу.