1. Танилцуулга ба Бүтээгдэхүүн дууссанview
Thank you for choosing the ULTIMATE SPEED® Hydraulic Bottle Jack. This robust and reliable jack is designed for safely lifting vehicles and other heavy objects up to a maximum capacity of 3000 kg (3 tons). Its compact design and easy operation make it an essential tool for automotive maintenance and repair.
Please read this manual thoroughly before operating the jack to ensure safe and efficient use. Keep this manual for future reference.
2. Аюулгүй ажиллагааны заавар
АНХААРУУЛГА: Эдгээр аюулгүй байдлын зааврыг дагаж мөрдөхгүй байх нь ноцтой гэмтэл, үхэл эсвэл эд хөрөнгийн хохирол учруулж болзошгүй.
- Always operate the jack on a hard, level, and stable surface. Avoid uneven ground or soft surfaces.
- Never exceed the rated lifting capacity of 3000 kg.
- Always use appropriate jack stands to support the vehicle immediately after lifting. Never work under a vehicle supported only by the hydraulic jack.
- Тээврийн хэрэгслийг өргөхөөс өмнө зогсоолын тоормос холбогдсон, дугуйнууд нь түгжигдсэн эсэхийг шалгаарай.
- Position the jack only at the vehicle manufacturer's recommended lifting points. Consult your vehicle's owner's manual.
- Keep hands, feet, and other body parts clear of moving parts and the area under the load.
- Do not modify the jack or use it for purposes other than its intended use.
- If the jack shows signs of damage or malfunction, do not use it. Contact qualified service personnel.
- Хамгаалалтын шил, бээлий гэх мэт зохих хувийн хамгаалалтын хэрэгслийг өмс.
3. Багцын агуулга
Carefully unpack all items and check for any damage. If any parts are missing or damaged, do not use the product and contact customer support.
- 1 x ULTIMATE SPEED® Hydraulic Bottle Jack
- 1 x Two-piece Lifting Handle
4. Бүтээгдэхүүний онцлог
- Өндөр хүчин чадал: Lifts up to 3000 kg (3 tons).
- Тохируулж болох өргөх өндөр: Approximately 11.5 cm stroke.
- Gentle Lowering: Equipped with a precise release valve for controlled descent.
- Аюулгүй атгах: Features a profiled saddle for stable contact with the load.
- Зай хэмнэх дизайн: Comes with a two-piece lifting handle for compact storage.
- Хэт ачааллын хамгаалалт: Integrated safety valve prevents lifting beyond rated capacity.
- Компакт хэмжээсүүд: Minimum height approx. 185 mm, maximum height approx. 360 mm.
- Хөнгөн жин: Weighs approximately 2.9 kg (with lifting rod).
5. Тохиргоо
- Баглаа задлах: Remove the hydraulic bottle jack and its components from the packaging.
- Бариулыг угсрах: Insert the smaller section of the lifting handle into the larger section. The handle is used for both pumping and operating the release valve.
- Анхны үзлэг: Before first use, inspect the jack for any visible damage, leaks, or loose parts. Do not use if damaged.
- Bleed Air (Recommended): To ensure optimal performance, it is recommended to bleed any trapped air from the hydraulic system.
- Бүрэн онгойлгохын тулд суллах хавхлагыг цагийн зүүний эсрэг эргүүлнэ үү.
- Pump the handle several times to extend and retract the ram fully.
- Close the release valve by turning it clockwise. The jack is now ready for use.
6. Үйл ажиллагаа
6.1. Тээврийн хэрэгслийг өргөх
- Тээврийн хэрэгслийг бэлтгэх: Тээврийн хэрэгслийг хатуу, тэгш гадаргуу дээр байрлуул. Зогсоолын тоормосоо татаж, газарт үлдэх дугуйнууд дээр дугуйны гажуудлыг байрлуул.
- Position Jack: Locate the vehicle manufacturer's recommended lifting point. Place the hydraulic jack directly under this point, ensuring the saddle is centered and making full contact with the lifting surface.
- Суллах хавхлагыг хаах: Insert the slotted end of the lifting handle onto the release valve and turn it clockwise until it is firmly closed. Do not overtighten.
- Өргөх ачаалал: Insert the handle into the pump sleeve. Pump the handle up and down steadily to raise the jack ram and lift the vehicle to the desired height.
- Аюулгүй ачаалал: Immediately after lifting, place appropriately rated jack stands under the vehicle's designated support points. Slowly lower the vehicle onto the jack stands (see 6.2 Lowering the Vehicle) and remove the hydraulic jack. Never work under a vehicle supported only by the jack.
6.2. Тээврийн хэрэгслийг буулгах
- Буурахад бэлтгэх: If the vehicle is on jack stands, slightly raise the vehicle with the hydraulic jack to relieve pressure from the jack stands. Remove the jack stands.
- Open Release Valve: Slowly and carefully turn the release valve counter-clockwise using the slotted end of the lifting handle. The vehicle will begin to descend. Control the descent speed by adjusting how much you open the valve.
- Fully Lower: Continue to open the valve until the vehicle is fully lowered to the ground.
- Жакийг устгах: Once the vehicle is fully lowered and stable, remove the hydraulic jack.
7. Засвар үйлчилгээ
Regular maintenance ensures the longevity and safe operation of your hydraulic jack.
- Цэвэрлэгээ: Keep the jack clean and free of dirt, grease, and debris. Wipe down the ram and pump mechanism after each use.
- Тосолгоо: Periodically lubricate pivot points and moving parts with light machine oil.
- Гидравлик шингэн: Check the hydraulic fluid level periodically. If low, add high-quality hydraulic jack oil. Do not use brake fluid or motor oil. (Note: Access to fluid reservoir may vary by model and may require professional service).
- Хадгалах: Store the jack in a dry, clean place with the ram fully retracted to prevent corrosion and extend seal life.
- Шалгалт: Before each use, inspect the jack for any signs of damage, wear, or leaks. Pay attention to the ram, seals, and base.
8. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Жак ачаа өргөхгүй. | Суллах хавхлага нээлттэй байна. Бага гидравлик шингэн. Гидравлик систем дэх агаар. Хэт ачаалал. | Суллах хавхлагыг бүрэн хаа. Check and refill fluid. Bleed air from system (see Setup). Reduce load; do not exceed 3000 kg. |
| Жэк удаанаар эсвэл тогтворгүй байдлаар өргөв. | Бага гидравлик шингэн. Гидравлик систем дэх агаар. | Check and refill fluid. Bleed air from system (see Setup). |
| Жэк хэтэрхий хурдан доошоо буулаа. | Release valve opened too far. Дотоод гоожих. | Control descent by slowly opening valve. Мэргэшсэн үйлчилгээний ажилтантай холбоо барина уу. |
| Жак доошлохгүй. | Release valve stuck or not fully open. | Ensure valve is fully open. Check for obstructions. |
Хэрэв та энд жагсаагдаагүй асуудлуудтай тулгарвал эсвэл шийдлүүд асуудлыг шийдэж чадахгүй бол хэрэглэгчийн дэмжлэгтэй холбогдоно уу.
9. Техникийн үзүүлэлтүүд
| Атрибут | Үнэ цэнэ |
|---|---|
| Брэнд | Хамгийн дээд хурд |
| Загвар | Wagenheber5442 |
| Үйлдвэрлэгч | ULTIMATE SPEED® |
| Ачааллын хүчин чадал | 3000 kg (3 tons) |
| Хамгийн бага өндөр | Ойролцоогоор 185 мм |
| Хамгийн их өндөр | Ойролцоогоор 360 мм |
| Lifting Stroke | Ойролцоогоор 11.5 см |
| Зүйлийн жин | Approx. 2.9 kg (with lifting rod) |
| Багцын хэмжээ | 19.3 x 12.1 x 10.8 см |
| Өнгө | Улаан |
| Автомашины суурилуулалтын төрөл | Бүх нийтийн |
10. Баталгаат хугацаа ба дэмжлэг
Your ULTIMATE SPEED® Hydraulic Bottle Jack is manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or contact the retailer where the product was purchased.
For technical support, spare parts, or service inquiries, please contact the manufacturer or your local distributor. Keep your purchase receipt as proof of purchase.
Бүтээгдэхүүний зураг
