Танилцуулга
This manual provides essential information for the safe and efficient operation of your Tektronix MSO22 2-BW-100 Mixed Signal Oscilloscope. This instrument is designed for precise measurement and analysis of electronic signals, featuring a 100 MHz bandwidth and 2 analog channels.
Гол онцлогууд нь:
- Analog input channels: 2 inputs
- Зурвасын өргөн: 100 МГц
- Sample rate: 2.5 GS/s Half channels; 1.25 GS/s All channels
- Record length: 10 Mpoints per channel
- Vertical resolution: 8 bits ADC; Up to 16 bits in high-resolution mode
Тохиргоо ба холболтууд
Before operating the oscilloscope, ensure it is placed on a stable, level surface with adequate ventilation. Connect the power cord to the instrument and a grounded AC outlet.
Figure 1: Front panel of the Tektronix MSO22 2-BW-100 Oscilloscope, showing the display, control knobs, buttons, and input connectors (Inputs 1, 2, Aux In, AFG/Aux Out).
Оролтын холболтууд
- Analog Inputs (1, 2): Connect your probes to these BNC connectors for signal acquisition.
- AUX IN: Auxiliary input for external trigger or other signals.
- AFG/Aux Out: Output for the Arbitrary Function Generator or auxiliary signals.
Асаалттай
Press the power button located on the front panel to turn on the instrument. Allow a few moments for the system to boot up.
Ашиглалтын заавар
This section outlines the basic steps for operating the oscilloscope to capture and analyze waveforms.
Basic Waveform Capture
- Холбох датчик: Attach a compensated probe to one of the analog input channels (e.g., Input 1).
- Connect to Circuit: Connect the probe tip to the test point in your circuit and the ground clip to the circuit's ground.
- Auto-Set: дээр дарна уу Auto-Set button (if available, common on oscilloscopes) to automatically adjust vertical and horizontal settings for a stable display.
- Босоо масштабыг тохируулах: -г ашиглана уу Босоо масштаб knob to adjust the volts per division, controlling the amplitude of the waveform on the screen.
- Хэвтээ масштабыг тохируулах: -г ашиглана уу Хэвтээ масштаб knob to adjust the seconds per division, controlling the time base of the waveform.
- Триггерийг тохируулах: -г ашиглана уу Триггерийн түвшин дууг тохируулах товчлуурtage level at which the oscilloscope captures the waveform, ensuring a stable display.
Хэмжилтийн функцууд
The MSO22 2-BW-100 offers various automated measurement functions. Access these through the on-screen menu system. Common measurements include Peak-to-Peak Voltage, Frequency, Period, and Rise/Fall Time.
Засвар үйлчилгээ
Зөв засвар үйлчилгээ нь таны осциллографын урт наслалт, нарийвчлалыг баталгаажуулдаг.
Цэвэрлэгээ
- Гадна талын гадаргууг зөөлөн арчиж, damp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
- Төхөөрөмжид шингэн орохгүй байхыг баталгаажуул.
- Clean the display screen with a soft, lint-free cloth specifically designed for electronic displays.
Шалгалт тохируулга
For optimal performance, periodic calibration by qualified service personnel is recommended. Refer to the official Tektronix service manual for calibration procedures and intervals.
Алдааг олж засварлах
Энэ хэсэг нь танд тулгарч болох нийтлэг асуудлуудын шийдлүүдийг өгдөг.
- Дэлгэц байхгүй:
- Ensure the power cord is securely connected and the instrument is powered on.
- Check the brightness and contrast settings of the display.
- Тогтворгүй долгионы хэлбэр:
- Adjust the trigger level and trigger source settings.
- Verify the probe compensation is correct.
- Check for proper grounding of the probe and the circuit under test.
- Дохио илрээгүй:
- Ensure the probe is correctly connected to the input channel and the circuit.
- Check the input coupling (AC/DC/GND) and vertical scale settings.
- Verify the signal source is active.
If problems persist, contact Tektronix customer support.
Үзүүлэлтүүд
Detailed technical specifications for the Tektronix MSO22 2-BW-100 Mixed Signal Oscilloscope.
| Онцлог | Тодорхойлолт |
|---|---|
| Загварын дугаар | MSO22 2-BW-100 |
| Аналог оролтын сувгууд | 2 оролт |
| Дамжуулах зурвасын өргөн | 100 МГц |
| Sample Rate (Half Channels) | 2.5 GS/s |
| Sample Rate (All Channels) | 1.25 GS/s |
| Бичлэгийн урт | 10 Mpoints per channel |
| Босоо нарийвчлал | 8 bits ADC; Up to 16 bits in high-resolution mode |
| Үйлдвэрлэгч | Tektronix |
| Эхний боломжтой огноо | 17 оны зургадугаар сарын 2022 |
Баталгаат болон дэмжлэг
Tektronix products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Tektronix webсайт.
For technical support, service, or additional documentation, please contact Tektronix customer service or visit their official support portal. Ensure you have your product model number (MSO22 2-BW-100) and serial number ready when contacting support.
Онлайн нөөцүүд: www.tek.com
