PERLESMITH телевизийн хананд суурилуулах зааварчилгааны гарын авлага

Танилцуулга

This manual provides detailed instructions for the safe and correct installation and operation of your PERLESMITH TV Wall Mounts, including the PSMTK1 Tilting Mount and the PSMFK7 Full Motion Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.

Аюулгүй байдлын чухал мэдээлэл

АНХААРУУЛГА: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.

• Do not install on drywall alone. The mount must be secured to a single wood stud, solid concrete, or brick wall.
• Ханын бүтэц нь суурь болон телевизийн нийт жинг найдвартай дааж чадах эсэхийг шалгаарай.
• Always use an assistant for lifting and positioning the television.
• Суурилуулалтын загвар бүрт заасан хамгийн их жингийн багтаамжаас хэтрүүлж болохгүй.
• Бүх холболт болон бэхэлгээг найдвартай байлгахын тулд үе үе шалгаж байгаарай.

Багцын агуулга

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact PERLESMITH customer service.

PSMFK7 Full Motion TV Wall Mount Components

Image: The PSMFK7 full motion TV wall mount, showing the articulating arm, TV plate, wall plate, and small accessories like cable ties and a bubble level.

• Full Motion Wall Plate Assembly
• Зурагтын хаалт (x2)
• Mounting Hardware Kit (various screws, anchors, washers)
• Бөмбөлөг түвшин
• Кабелийн зангилаа

PSMTK1 Tilting TV Wall Mount Components

Image: The PSMTK1 tilting TV wall mount, showing the wall plate, TV brackets, and small accessories like cable ties and a bubble level.

• Tilting Wall Plate
• Зурагтын хаалт (x2)
• Mounting Hardware Kit (various screws, anchors, washers)
• Бөмбөлөг түвшин
• Кабелийн зангилаа

Тохиргоо ба суурилуулалт

1. Суулгахын өмнөх шалгалт

1. ТВ-ийн нийцтэй байдлыг шалгах:
       For PSMFK7: Fits most 26"-55" TVs up to 70 lbs (31.8 kg) with VESA patterns from 100x100mm to 400x400mm.
       For PSMTK1: Fits most 23"-60" TVs up to 115 lbs (52 kg) with VESA patterns from 75x75mm to 400x400mm.
   

   Image: Visual guide for PSMFK7 compatibility, indicating TV size range, weight capacity, and VESA mounting patterns.
2. Ханын төрлийг тодорхойлох: This mount is designed for installation on single wood studs, solid concrete, or brick walls. Ганцаараа хуурай хананд суулгаж болохгүй.
3. Check for Cable Blockage: Ensure the TV's power and input ports will not be blocked by the mounting brackets.

2. Attaching TV Brackets to TV

1. Зурагтаа зөөлөн, цэвэрхэн гадаргуу дээр доош харуулан болгоомжтой байрлуул.
2. Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes.
3. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are level and securely fastened.

3. Ханын хавтанг суурилуулах

1. Determine the desired height for your TV. Mark the drilling locations on the wall.
2. Модон тулгуур суурилуулахад: Use a stud finder to locate the center of a wood stud. Drill pilot holes (e.g., 7/32" or 5.5mm) at the marked locations. Secure the wall plate using lag bolts and washers.
3. Бетон/Тоосгон хана суурилуулахад: Drill pilot holes (e.g., 3/8" or 10mm) at the marked locations. Insert concrete anchors into the holes. Secure the wall plate using lag bolts and washers.
4. Use the included bubble level to ensure the wall plate is perfectly horizontal before tightening all fasteners.

4. Зурагтыг ханын хавтан дээр бэхлэх

1. With an assistant, carefully lift the TV with the attached brackets.
2. Hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the mount.
3. For PSMFK7: ТВ-г өгөгдсөн аюулгүйн эрэг эсвэл түгжих механизмыг ашиглан угсралтад бэхлээрэй.
4. For PSMTK1: Engage the locking mechanism with the quick release pull-down straps to secure the TV.


Image: Simplified installation steps for the PSMTK1 mount, illustrating how the TV brackets hook onto the wall plate and the use of the pull cord for locking and releasing.

Зурагтын суурьгаа ажиллуулах

PSMFK7 Full Motion Mount Adjustments

Image: Demonstrates the PSMFK7 mount's flexibility, including tilting down 15 degrees, extending up to 19.17 inches, swiveling 180 degrees, and leveling +/-3 degrees.

• Налалтын тохируулга: The mount features a +5°/-15° tilt range. Loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then tighten the knobs to secure.
• Эргэлтийн тохируулга: The articulating arm allows for a +/-90° swivel. Gently push or pull the TV to the desired viewөнцөг.
• Өргөтгөх/Татах: Extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile хар.
• Түвшин тохируулах: After installation, you can make a +/-3° leveling adjustment to ensure the TV is perfectly horizontal.

PSMTK1 Tilting Mount Adjustments

• Налалтын тохируулга: The PSMTK1 allows for a downward tilt. Loosen the tilt bolts on the side of the TV brackets, adjust the TV to the desired angle, and then tighten the bolts.
• Түгжих механизм: Use the pull-down straps to engage or disengage the quick-release locking mechanism, securing the TV to the wall plate.

Засвар үйлчилгээ

• Бүх боолт болон боолтыг чанга, найдвартай эсэхийг үе үе шалгаж байгаарай.
• Суурилуулалтыг зөөлөн, хуурай даавуугаар цэвэрлээрэй. Зүлгүүрийн цэвэрлэгч эсвэл уусгагч хэрэглэхээс зайлсхий.
• Ensure no cables are pinched or stressed by the mount's movement.

Алдааг олж засварлах

• ТВ түвшин биш байна: Use the leveling adjustment feature (PSMFK7) or re-adjust the tilt bolts (PSMTK1) and ensure the wall plate was installed level.
• Уул нь сул байна: Re-check all wall plate and TV bracket fasteners. Ensure they are tightened securely. If installed on a wood stud, confirm the lag bolts are fully engaged in the stud. If on concrete, ensure anchors are properly seated.
• Difficulty moving full motion mount: Check for any obstructions. Ensure all pivot points are free of debris. If the movement is too stiff or too loose, some joints may have adjustable tension screws (refer to specific model diagrams if available).
• Дутуу хэсгүүд: Do not proceed with installation. Contact PERLESMITH customer support for replacement parts.

Үзүүлэлтүүд

Баталгаат хугацааны мэдээлэл

PERLESMITH products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your product or visit the official PERLESMITH webсайт. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.

Хэрэглэгчийн дэмжлэг

If you have any questions, require assistance with installation, or need replacement parts, please contact PERLESMITH customer support. Our team is available to help you.

• Webсайт: www.perlesmith.com (Hypothetical link, please replace with actual if available)
• Имэйл: support@perlesmith.com (Hypothetical email, please replace with actual if available)
• Утас: 1-800-XXX-XXXX (Hypothetical number, please replace with actual if available)