1. Танилцуулга
The Alula RE622 Series CryptiX NanoMax Door and Window Sensor is a compact, full-featured security transmitter designed to detect the opening and closing of doors and windows. Its small profile allows for discreet installation, and it utilizes encrypted transmissions for enhanced security. The sensor can also be used with external contacts for broader application, providing reliable security monitoring for your home or business.
A compact white Alula RE622 Series CryptiX NanoMax Door and Window Sensor, consisting of two main parts: the sensor unit and a smaller magnet unit, designed for discreet installation.
2. Бүтээгдэхүүний онцлог
- Smallest full-featured security transmitter in the industry.
- Utilizes encrypted transmissions for enhanced security.
- Designed for flexible magnet positioning to accommodate various installation needs.
- Features quick peel and press mounting for easy installation.
- Includes Strip and Stick external contact holes for expanded functionality.
3. Багцын агуулга
Таны багцад бүх зүйл байгаа эсэхийг шалгана уу:
- Alula RE622 Series CryptiX NanoMax Sensor Unit
- Соронзон нэгж
- Mounting Adhesive (pre-applied or separate strips)
- Энэхүү хэрэглэгчийн гарын авлага
4. Тохиргоо ба суурилуулалт
- Бэлтгэл: Choose a clean, dry, and flat surface for mounting. Ensure the surface is free of dust, grease, or debris.
- Mounting the Sensor and Magnet:
- Peel the protective backing from the adhesive on both the sensor unit and the magnet unit.
- Align the sensor unit on the door/window frame and the magnet unit on the moving part (door/window) so that they are no more than 0.5 inches (1.27 cm) apart when the door/window is closed. The alignment marks on both units should face each other.
- Press firmly for at least 30 seconds to ensure proper adhesion.
- External Contacts (Optional): If using external contacts, connect them to the designated Strip and Stick terminals on the sensor unit. Refer to your security system's manual for wiring diagrams.
- Системийн интеграци: Enroll the RE622 sensor with your compatible Alula security system. Follow the specific instructions provided in your security system's installation guide for adding new wireless devices.
5. Ашиглалтын заавар
The Alula RE622 Series CryptiX NanoMax sensor operates by detecting the separation of its main unit from the magnet unit, or the opening of an external contact connected to it. When the monitored door or window is opened, or the external contact circuit is broken, the sensor transmits a signal to your security system, triggering an alarm or notification based on your system's programming.
- Хэвийн төлөв: When the door/window is closed, the sensor and magnet are in close proximity, and the external contact (if used) is closed. The sensor is in a secure, non-alarm state.
- Сэрүүлгийн төлөв: When the door/window is opened, causing the sensor and magnet to separate, or when the external contact is opened, the sensor immediately transmits an alarm signal to your security panel.
6. Засвар үйлчилгээ
- Цэвэрлэгээ: To clean the sensor, gently wipe it with a dry, soft cloth. Do not use abrasive cleaners, solvents, or spray directly onto the device, as this may damage the electronics or finish.
- Зай солих: The RE622 sensor is battery-powered. While batteries are not included in the initial package, they are required for operation. When the battery level is low, your security system will typically indicate a low battery condition for the sensor. To replace the battery, carefully open the sensor casing (refer to your system's manual for specific instructions if needed) and replace the old battery with a new 3-volt DC battery of the specified type. Ensure correct polarity.
- Тогтмол туршилт: It is recommended to periodically test the sensor's functionality (e.g., once a month) to ensure it is communicating properly with your security system. Consult your security system's user manual for instructions on how to perform a system test.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Sensor not responding or not enrolling. | Low or dead battery; sensor too far from panel; interference; incorrect enrollment procedure. | Replace battery; move sensor closer to the security panel; check for sources of interference; re-attempt enrollment following system instructions. |
| Хуурамч дохиолол. | Sensor or magnet misalignment; loose mounting; vibration. | Re-align sensor and magnet; ensure both units are securely mounted; check for excessive vibration on the door/window. |
| External contact not working. | Incorrect wiring; faulty external contact. | Verify wiring connections; test the external contact separately; replace external contact if faulty. |
8. Техникийн үзүүлэлтүүд
| Атрибут | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | RE622 |
| Суурилуулах төрөл | Наалдамхай бэхэлгээ |
| Мэдрэгч технологи | Холбоо барих мэдрэгч |
| Эрчим хүчний эх үүсвэр | Батерейгаар ажилладаг |
| Ботьtage | 3 вольт (ДС) |
| Өнгө | Цагаан |
| Багцын хэмжээ | 2 x 1 x 1 инч |
| Үйлдвэрлэгч | Алула |
| UPC | 857744008171 |
9. Баталгаат хугацаа ба дэмжлэг
For warranty information and technical support, please refer to the documentation provided with your Alula security system or visit the official Alula website. You can also contact Alula customer service directly for assistance with product registration, troubleshooting, or any other inquiries related to your RE622 Series CryptiX NanoMax sensor.
Alula Official Webсайт: https://alula.com
