Толсен холбоогүй хувьсах гүйдлийн хэмжээtage Detector (Model: 38110) - Instruction Manual

1. Танилцуулга

This manual provides detailed instructions for the safe operation, maintenance, and troubleshooting of your Tolsen Non-Contact AC Voltage Detector, Model 38110. Please read this manual thoroughly before using the device to ensure proper function and safety.

Бүтээгдэхүүн дууссанview

The Tolsen 38110 is a CE certified non-contact AC voltage detector designed for quick and safe identification of live AC voltage. It is manufactured according to CAT III (1000V) safety standards, making it suitable for a wide range of electrical applications. The device features a standard AC voltage detection range of 12V to 1000V at a frequency of 50-60Hz.

Гол онцлогууд нь:

• Audible and visual alarm modes (sound and light flash).
• Integrated white LED probe light for illumination in dark areas.
• Батерейны ашиглалтын хугацааг хэмнэхийн тулд автомат унтрах функц.
• Батарей бага үзүүлэлт.
• Холбоо барихгүй ботьtage (NCV) sensing with automatic selection of 3 sensitivity levels (high, medium, and low).
• Three types of frequency, sound, and LED alarm indications.

2. Аюулгүй байдлын мэдээлэл

Always adhere to local safety regulations and guidelines when working with electrical systems. This device is designed to assist in detecting AC voltage, but it should not be used as the sole method for determining the presence of voltage. Always verify with a known live source before testing and a known de-energized source after testing.

• АНХААРУУЛГА: Risk of electric shock. Do not use if the device appears damaged or is not functioning correctly.
• Эзлэхүүнийг хэмжих гэж бүү оролдооройtage beyond the specified range (1000V AC).
• Батерей бага байгаагийн дохио гарч ирэх үед батерейг зөв суурилуулж, сольсон эсэхийг шалгаарай.
• Төхөөрөмжийг хуурай, цэвэр байлга.
• This device is for non-contact detection only. Do not touch live conductors with the probe tip.

3. Бүтээгдэхүүний бүрэлдэхүүн хэсгүүд

Familiarize yourself with the different parts of your Tolsen Non-Contact AC Voltage Илрүүлэгч:

Зураг 3.1: Урд view of the Tolsen 38110 Voltage Detector, showing the probe tip, LED indicators, and control buttons.

Зураг 3.2: Ойрын зураг view highlighting the NCV sensitivity indicators (High, Medium, Low) and the power and flashlight buttons.

• Шинжилгээний зөвлөмж: Хувьсах гүйдлийг илрүүлдэгtage холбоо барихгүйгээр.
• LED үзүүлэлтүүд: Visual indication of voltage presence and sensitivity level.
• Цахилгаан товч: Төхөөрөмжийг асаах/унтраах.
• Гар чийдэнгийн товчлуур: Activates/deactivates the white LED probe light.
• Зайны тасалгаа: Located at the bottom, for 2x AAA batteries.

4. Тохиргоо ба зай суурилуулах

Батерей суурилуулах

1. Twist and pull off the battery cap at the bottom of the detector.
2. Зөв туйлшралыг (+/-) хангаж, хоёр (2) 1.5V AAA батерейг оруулна уу.
3. Replace the battery cap, twisting it securely until it clicks into place.

The device will automatically perform a self-test upon power-on. If the low battery indicator illuminates, replace the batteries immediately for accurate readings.

5. Ашиглалтын заавар

Асаах/унтраах

• дээр дарна уу Цахилгаан товч (usually marked with 'I' or a power symbol) to turn the detector ON.
• The device will emit a short beep and the LED indicators will flash briefly.
• To turn OFF, press and hold the Цахилгаан товч until the device powers down, or it will automatically shut off after a period of inactivity.

Гэрлийг ашиглах

• дээр дарна уу Гар чийдэнгийн товчлуур (usually marked with a light bulb symbol) to turn the white LED probe light ON.
• Press the button again to turn the flashlight OFF.

Холбоо барихгүй ботьtage (NCV) илрүүлэх

1. Ensure the detector is powered ON.
2. Place the probe tip near the wire, outlet, or electrical component you wish to test.
3. The detector will automatically select the appropriate sensitivity level (High, Medium, or Low) based on the detected voltage хүч чадал.
4. Хэрэв AC voltage is detected, the device will emit an audible beep and the LED indicators will flash. The frequency of the beeps and flashes will increase with higher voltage or closer proximity to the source.
5. The LED indicators will also show the detected voltage түвшин:
• Бага: Indicates a weaker signal or lower voltage.
• Дунд: Indicates a moderate signal or voltage.
• Өндөр: Indicates a strong signal or higher voltage.

Always test the detector on a known live circuit before and after use to confirm its proper operation.

6. Техникийн үзүүлэлтүүд

Figure 6.1: Approximate dimensions of the Tolsen 38110 Voltage Илрүүлэгч.

7. Засвар үйлчилгээ

Цэвэрлэгээ

Wipe the device with a dry, clean cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the device.

Зай солих

When the low battery indicator illuminates, replace the batteries as described in the "Setup and Battery Installation" section. Remove batteries if the device will not be used for an extended period to prevent leakage.

Хадгалах

Store the detector in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Алдаа засах

9. Баталгаат хугацаа ба дэмжлэг

Tolsen products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Tolsen webсайт. Худалдан авалтын баримтаа аливаа баталгаат нэхэмжлэлийг худалдан авсан баримт болгон хадгална уу.

For further assistance, please contact Tolsen customer service.