ANCEL TD700 Бүх системийн OBD2 сканнерын хэрэглэгчийн гарын авлага

1. Танилцуулга

The ANCEL TD700 is a professional-grade diagnostic scan tool designed to provide comprehensive system diagnostics for Toyota, Lexus, and Scion vehicles. It also supports full OBD-II functions for all OBD-II compliant vehicles manufactured from 1996 onwards. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

2. Аюулгүй байдлын мэдээлэл

• Агааржуулалт сайтай газарт автомашины туршилтыг үргэлж хийж байгаарай.
• Wear safety eye protection and clothing that meets safety standards.
• Avoid placing the device near the engine or exhaust system to prevent damage from high temperatures.
• Жолоо барьж байхдаа төхөөрөмжийг бүү ажиллуул.
• Keep the device dry and clean. Avoid contact with water, oil, or grease.
• Refer to your vehicle's service manual for specific diagnostic procedures and safety precautions.

3. Багцын агуулга

• 1x ANCEL TD700 All System OBD2 Scanner
• 1x ANCEL Protective Case

The ANCEL TD700 scanner neatly stored within its durable protective case.

4. Бүтээгдэхүүн дууссанview

The ANCEL TD700 features a user-friendly interface with a clear display and intuitive button layout for easy navigation and operation.

The ANCEL TD700 scanner, showcasing its display and control buttons, alongside its protective carrying case.

Төхөөрөмжийн бүрэлдэхүүн хэсгүүд:

• Дэлгэц: Shows diagnostic results, menu options, and live data.
• Навигацийн товчлуурууд (дээш/доошоо/зүүн/баруун): Used to scroll through menus and select options.
• ENTER товч: Сонголт эсвэл үйлдлийг баталгаажуулна.
• EXIT/BACK Button: Өмнөх дэлгэц рүү буцах эсвэл үйлдлийг цуцална.
• I/M товчлуур: I/M бэлэн байдлын төлөвт хурдан хандах.
• READ DTC Button: Directly reads Diagnostic Trouble Codes.
• ERASE DTC Button: Directly clears Diagnostic Trouble Codes.
• OBD-II холбогч: Connects the scanner to the vehicle's OBD-II port.

5. Тохиргоо

1. OBD-II портыг олох: The 16-pin Data Link Connector (DLC) is usually located under the dashboard on the driver's side of the vehicle.
2. Гал асаах унтраах: Ensure the vehicle's ignition is turned off before connecting the scanner.
3. Connect Scanner: Сканнерын OBD-II холбогчийг тээврийн хэрэгслийн DLC руу сайтар залгаарай.
4. Гал асаах: Тээврийн хэрэгслийн асаалтыг ON (хөдөлгүүр унтарсан) байрлалд тавь. Сканнер автоматаар асах болно.
5. Оношлогоо эхлэх: Follow the on-screen prompts to begin your diagnostic session.

6. Ашиглалтын заавар

6.1 General OBD-II Functions (for all OBD-II compliant vehicles)

The TD700 provides standard OBD-II diagnostic capabilities for engine systems.

The TD700's display showing various OBD-II diagnostic options, including Read Codes, Erase Codes, Live Data Stream, I/M Readiness, EVAP System Test, and Vehicle Information.

• Код унших: Ерөнхий (P0, P2, P3, болон U0) болон үйлдвэрлэгчийн онцлог (P1, P3, болон U1) кодууд, мөн хүлээгдэж буй кодуудыг олж авна.
• Кодуудыг устгах: Clears Diagnostic Trouble Codes (DTCs) from the vehicle's computer and turns off the Malfunction Indicator Lamp (MIL/Check Engine Light).
• Шууд өгөгдөл: Displays real-time operating parameters of the vehicle's engine in text or graph format.
• I/M бэлэн байдал: Checks the status of emission-related monitoring systems to ensure they are operating correctly.
• Тээврийн хэрэгслийн мэдээлэл: Retrieves the Vehicle Identification Number (VIN), Calibration ID (CID), and Calibration Verification Number (CVN).

6.2 Toyota/Lexus/Scion Specific Functions

The TD700 offers advanced, manufacturer-level diagnostics and special functions tailored for Toyota, Lexus, and Scion vehicles.

The TD700's main menu showing options for OBDII, Toyota-specific diagnostics, Oil Reset, EPB Reset, BAT, BMS Reset, ETC Reset, and Tool Setup.

The TD700 displaying a menu for selecting various vehicle systems for diagnosis, such as Engine, Transmission, Airbag, TPMS, ABS, SAS, BMS, EPB, GPS, ESP, and A/C.

The TD700 showing a menu for selecting special functions like Oil Reset, EPB Reset, ETC Reset, TPMS Reset, BMS Reset, ABS Bleeding, SAS Calibration, DPF Regeneration, Throttle Learning, Battery Registration, and Injector Coding.

• Бүх системийн оношлогоо: Accesses and diagnoses all available electronic control systems in compatible Toyota, Lexus, and Scion vehicles, including Engine, Transmission, ABS, Airbag (SRS), TPMS, SAS, BMS, EPB, A/C, and more.
• Тосыг дахин тохируулах: Тос сольсны дараа тосны үйлчилгээний гэрлийг дахин тохируулна.
• EPB дахин тохируулах: Resets the Electronic Parking Brake system after brake pad replacement.
• BAT (Battery) Management System (BMS) Reset: Performs battery registration and reset functions.
• ETC Reset: Resets the Electronic Throttle Control system.
• ABS цус алдалт: Performs ABS brake bleeding procedures.
• SAS шалгалт тохируулга: Жолооны өнцгийн мэдрэгчийг тохируулна.
• DPF нөхөн төлжилт: Дизель тоосонцор шүүлтүүрийн нөхөн төлжилтийг эхлүүлнэ.
• Throttle Learning: Performs throttle body relearn procedures.
• Батерейны бүртгэл: Registers a new battery with the vehicle's system.
• Инжекторын кодчилол: Шинэ инжекторын дугаарыг ECU-д кодлодог.

7. Засвар үйлчилгээ

• Цэвэрлэгээ: Зөөлөн ашиглах, damp cloth with mild detergent to clean the scanner's exterior. Do not use abrasive cleaners or solvents.
• Хадгалах: Store the device in its protective case in a dry, cool, and dust-free environment when not in use. Avoid direct sunlight or extreme temperatures.
• Програм хангамжийн шинэчлэлтүүд: ANCEL-ийн албан тушаалтныг тогтмол шалгаж байгаарай website for available software updates to ensure optimal performance and compatibility with the latest vehicle models.

8. Алдаа засах

• Төхөөрөмж асахгүй байна:
  Ensure the OBD-II cable is securely connected to the vehicle's DLC. Verify the vehicle's ignition is in the ON position. Check the vehicle's battery for sufficient charge.
• Харилцааны алдаа:
  Confirm the vehicle's ignition is ON and the engine is OFF. Ensure the OBD-II connector is firmly seated. Verify the vehicle is OBD-II compliant (1996 or newer).
• DTC-үүд цэвэрлэгдээгүй байна:
  Diagnostic Trouble Codes can only be cleared if the underlying fault has been rectified. Ensure the ignition is ON and the engine is OFF. If the issue persists, further diagnosis may be required.

9. Техникийн үзүүлэлтүүд

10. Баталгаат хугацаа ба дэмжлэг

For technical support, product inquiries, or warranty information, please contact ANCEL customer service through their official channels. Details can typically be found on the ANCEL webсайт эсвэл бүтээгдэхүүний сав баглаа боодол дотор.