Танилцуулга
This manual provides detailed instructions for the installation, operation, and maintenance of your BLNAN 18W LED Ceiling Light with Motion Sensor. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: Two BLNAN 18W LED Ceiling Lights with motion sensors installed.
Аюулгүй байдлын мэдээлэл
Гал түймэр, цахилгаан цочрол, хувийн гэмтлийн эрсдлийг бууруулахын тулд цахилгаан хэрэгслийг суурилуулах, ажиллуулахдаа үндсэн аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөөрэй.
- Суурилуулах эсвэл засвар үйлчилгээ хийхээс өмнө хэлхээний таслуур дээрх цахилгаан тэжээлийг салгасан эсэхийг шалгаарай.
- Хэрэв та итгэлгүй байгаа бол суурилуулалтыг мэргэшсэн цахилгаанчин гүйцэтгэнэ.
- Do not install in locations with high humidity or extreme temperatures.
- Бүтээгдэхүүнийг өөрчлөх гэж бүү оролдоорой.
- Хүүхдийн гар хүрэхгүй газар хадгална.
Багцын агуулга
Суулгацыг эхлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу.
- BLNAN 18W LED Ceiling Light (2 units)
- Mounting accessories (screws, wall anchors, wire connector)
- Хэрэглэгчийн гарын авлага
Бүтээгдэхүүний онцлог
The BLNAN 18W LED Ceiling Light offers advanced features for convenient and efficient lighting:
- Нэгдсэн хөдөлгөөн мэдрэгч: Automatically detects movement within a 3.5m range and 120° sensing angle, activating the light.
- Adjustable Hold Time: Selectable light duration of 30s, 120s, or 180s after motion detection.
- Гурван гэрэлтүүлгийн горим: ON (always on), AUTO (motion + light sensor), and G (motion sensor only).
- Тохируулах өнгөний температур: Choose between 3000K (Warm White), 4000K (Natural White), and 5000K (Cool White).
- Эрчим хүчний хэмнэлттэй: 18W power consumption with 1800LM output, suitable for 5-10m² areas. Standby power is only 0.25W.
- Хэт нимгэн дизайн: Modern 2.5 cm ultra-thin profile with backlight for uniform, soft illumination.
- Өндөр чанартай барилга: Uses high-quality SMD2835 lamp beads and V2 flame-retardant polycarbonate material for durability and safety.
- Хялбар суурилуулалт: Lightweight polycarbonate material and metal safety cable simplify mounting without needing a ground wire.
Зураг: Нарийвчилсан view of the motion sensor and adjustment switches.
Суурилуулах заавар
Follow these steps to install your BLNAN LED Ceiling Light:
- Суулгахад бэлтгэх: Disconnect the main power supply at the circuit breaker before starting. Ensure the mounting surface is clean and dry.
- Өнгөний температурыг сонгох: Before mounting, use the slide switch on the back of the light panel to select your desired color temperature (3000K, 4000K, or 5000K). This setting cannot be changed easily after installation.
- Суурийн хавтанг суурилуулах: Position the light base on the ceiling or wall. Mark the drilling points. Drill holes and insert wall anchors if necessary. Secure the base plate using the provided screws.
- Утас холбох: Hang the light fixture using the metal safety cable to prevent it from falling during wiring. Connect the live and neutral wires from your ceiling to the corresponding terminals on the light fixture using the provided wire connector. This light does not require a ground wire due to its insulated polycarbonate material.
- Гэрлийн чийдэнг хавсаргах: Align the light fixture with the mounted base plate. Push and rotate the light to securely attach it to the base.
- Эрчим хүчийг сэргээх: Гэрлийг найдвартай суурилуулсны дараа таслагчийн хүчийг сэргээнэ.
Image: Adjusting color temperature before installation.
Image: Step-by-step installation guide.
Recommended Installation Height and Detection Range:
- Ceiling Mount: Recommended height 2.4 - 3.5 meters, with a maximum detection range of 6 meters.
- Wall Mount: Recommended height 1.8 - 2.4 meters.
Image: Motion sensor detection range and sensing angle.
Image: Recommended installation heights for wall and ceiling mounting.
Ашиглалтын заавар
Your BLNAN LED Ceiling Light features adjustable settings for motion detection and light duration.
1. Adjusting Detection Modes and Hold Time
Use the slide switch located on the surface of the light, next to the motion sensor, to select the desired mode and hold time:
Зураг: Дууслааview of the three detection modes.
- Асаах горим: The light will remain continuously on, functioning as a standard ceiling light. Motion detection is disabled.
- AUTO горим: (Motion Sensor + Light Sensor) The light will only activate at night or in low-light conditions when motion is detected. During the day, it remains off.
- G горим: (Motion Sensor Only) The light will activate whenever motion is detected, regardless of ambient light conditions (day or night).
For AUTO and G modes, use the adjacent slide switch to set the light duration (hold time) after motion detection:
- 30 секунд: Light stays on for 30 seconds.
- 120 секунд: Light stays on for 120 seconds.
- 180 секунд: Light stays on for 180 seconds.
2. Өнгөний температурыг тохируулах
The color temperature is set using a slide switch on the back of the light panel. This should be adjusted before final installation.
- 3000K: Warm White light, suitable for cozy environments.
- 4000K: Natural White light, ideal for general illumination.
- 5000K: Cool White light, suitable for task-oriented areas.
Зураг: Янз бүрийн өнгөний температурын дүрслэл.
Засвар үйлчилгээ
To ensure optimal performance and longevity of your BLNAN LED Ceiling Light:
- Цэвэрлэгээ: Disconnect power before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Шалгалт: Periodically check for any loose connections or damage. If any issues are found, disconnect power and consult a qualified technician.
- The LED light source is designed for long-term use (30,000 hours) and does not require bulb replacement.
Алдааг олж засварлах
If you encounter issues with your BLNAN LED Ceiling Light, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Гэрэл асдаггүй. | No power supply; Incorrect wiring; Sensor not detecting motion. | Check circuit breaker and wall switch. Verify wiring connections. Ensure sensor is not obstructed and is set to an appropriate mode (AUTO or G). |
| Гэрэл тасралтгүй асдаг. | Mode set to "ON"; Constant motion in detection area. | Switch mode to "AUTO" or "G". Ensure there is no continuous movement within the sensor's range. |
| Гэрэл санамсаргүй байдлаар асдаг. | Sensor sensitivity too high; Environmental factors (e.g., drafts, small animals, insects). | Ensure the sensor area is clear of obstructions or sources of false triggers. Consider adjusting the sensor's position if possible, or ensure it's not in a high-traffic area if random activation is problematic. |
| Гэрэл унтрахгүй. | Hold time set too long; Continuous motion. | Check the hold time setting (30s, 120s, 180s). Ensure no continuous motion is detected. |
| Light only works at night. | Mode set to "AUTO". | If you want it to work during the day, switch the mode to "G". |
Үзүүлэлтүүд
Detailed technical specifications for the BLNAN 18W LED Ceiling Light:
| Онцлог | Тодорхойлолт |
|---|---|
| Брэнд | БЛНАН |
| Загварын дугаар | LS-CL-I18W-M-C |
| Хэмжээ (L x W x H) | 22 x 22 x 2.5 см |
| Жин | 1.05 кг |
| Материал | Поликарбонат (PC) |
| Хүч | 18 ватт |
| Гэрлийн урсгал | 1800 люмен |
| Ботьtage | AC180-240V (230 Volts) |
| Өнгөний температур | 3000K / 4000K / 5000K (Тохируулж болно) |
| Өнгө дүрслэх индекс (CRI) | >80 |
| Хөдөлгөөн мэдрэгчийг илрүүлэх өнцөг | 120° |
| Хөдөлгөөн мэдрэгчийг илрүүлэх хүрээ | 3.5 метр хүртэл |
| Цагийн тохиргоог барина уу | 30/120/180 секунд |
| LED ашиглалтын хугацаа | 30,000 цаг |
| Эрчим хүчний үр ашгийн үнэлгээ | F (as per EU standards) (EPREL холбоос) |
| Суурилуулалтын төрөл | Таазны бэхэлгээ |
| Дотор/гадаа ашиглах | Дотор |
Image: Energy Efficiency Label.
Баталгаат болон дэмжлэг
For any questions, concerns, or technical support regarding your BLNAN LED Ceiling Light, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase receipt for warranty claims.
