LOKITHOR J3250 PRO асаагуурын хэрэглэгчийн гарын авлага

1. Танилцуулга

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. Аюулгүй байдлын мэдээлэл

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Нүд хамгаалах: Батерейтай ажиллахдаа хамгаалалтын шил зүүж байгаарай.
• Агааржуулалт: Төхөөрөмжийг агааржуулалт сайтай газар ашиглана уу.
• Хүүхдүүд: Төхөөрөмжийг хүүхдэд хүрэхгүй газар хадгална уу.
• Богино холболтууд: Улаан, хар cl-ийг бүү зөвшөөрamps to touch each other or the same metal object.
• Урвуу туйлшрал: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
• Чийг: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
• Хохирол: Do not use the device if it is damaged. Contact customer support for assistance.
• Температур: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, over-load, over-charge, and over-current protection.

3. Бүтээгдэхүүн дууссанview

3.1 Хайрцагт юу байгаа вэ

• LOKITHOR J3250 PRO Jump Starter Unit
• Jumper Starter Clamps
• USB-A-аас USB-C кабель
• USB-C-аас USB-C кабель
• 12V адаптер
• Дагалдах хэрэгсэл хадгалах уут
• Хэрэглэгчийн гарын авлага

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 Гол онцлогууд

• High Starting Current: 3250 хүргэлттэй Amp peak current for reliable vehicle starting.
• Хөдөлгүүрийн нийцтэй байдал: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
• LiFePO4 батерейны технологи: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
• Дэвшилтэт аюулгүй байдал: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
• 100W хоёр талын хурдан цэнэглэх: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
• ConnectMax технологи: Automatically detects clamp connection impedance to optimize starting efficiency.
• Зөөврийн цахилгаан банк: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
• 400 люмен LED гар чийдэн: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
• Бат бөх дизайн: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
• Урт зогсолтын хугацаа: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

The J3250 PRO provides 3250A peak current, suitable for large engines.

The device features an IP65 rating for water and dust resistance.

4. Тохиргоо болон цэнэглэх

4.1 Анхны цэнэглэлт

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

1. Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. Ашиглалтын заавар

5.1 Jump Starting a Vehicle (Normal Mode)

Use Normal Mode for vehicles with a partially discharged battery.

1. Cl-г хавсаргана ууamps: Улаан (+) cl-г холбоно ууamp to the positive terminal of the vehicle battery. Connect the black (-) clamp тээврийн хэрэгслийн батерейны сөрөг терминал руу.
2. Асаах: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
3. Машин эхлүүлэх: Машинаа эхлүүл.
4. Унтраах ба салгах: Once the vehicle starts, power off the jump starter and immediately disconnect the clampтээврийн хэрэгслийн батерейгаас s.

Steps for jump starting a vehicle using Normal Mode.

5.2 Jump Starting a Vehicle (Boost Mode)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

1. Red Cl-г хавсаргана ууamp: Улаан (+) cl-г холбоно ууamp тээврийн хэрэгслийн аккумуляторын эерэг терминал руу.
2. Activate Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
3. Black Cl-г хавсаргана ууamp: Хар (-) cl-г холбоно ууamp тээврийн хэрэгслийн батерейны сөрөг терминал руу.
4. Машин эхлүүлэх: Start your vehicle within 30 seconds of activating Boost Mode.
5. Унтраах ба салгах: Once the vehicle starts, power off the jump starter and immediately disconnect the clampтээврийн хэрэгслийн батерейгаас s.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 Зөөврийн цахилгаан банк болгон ашиглах

The J3250 PRO can charge various electronic devices.

• Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
• The device will automatically begin charging.

The J3250 PRO can charge multiple electronic devices.

5.4 LED гар чийдэн ашиглах нь

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

• Press the flashlight button once for constant illumination.
• Press again to cycle through Strobe and SOS modes.
• Дөрөв дэх удаагаа дарж гар чийдэнг унтраа.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. Засвар үйлчилгээ

• Тогтмол цэнэглэх: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
• Хадгалах: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
• Цэвэрлэгээ: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamp Арчилгаа: cl-ийг баталгаажуулна ууamps are clean and free of corrosion for optimal connection.

The J3250 PRO maintains charge for up to 42 months in standby.

7. Алдаа засах

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

• Төхөөрөмж асахгүй байна: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
• Vehicle Not Starting (Normal Mode):
  • cl байгаа эсэхийг шалгана ууampбатерейны зөв терминалуудад найдвартай холбогдсон (улаанаас эерэг, хараас сөрөг).
  • Ensure the vehicle battery terminals are clean and free of corrosion.
  • If the vehicle battery is completely dead, try using Өргөтгөх горим.
• Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
• Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
• Төхөөрөмжийн хэт халалт: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
• Цэнэглэх асуудал: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

If problems persist, please contact LOKITHOR customer support.

8. Техникийн үзүүлэлтүүд

The J3250 PRO is designed to operate in a wide range of temperatures.

9. Баталгаат хугацаа ба дэмжлэг

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR website or contact their customer service department directly. Keep your purchase receipt as proof of purchase for warranty claims.

If you have any after-sales questions, please feel free to contact us.