Lenz rcB 1200

Lenz Lithium Pack rcB 1200 User Manual

Model: rcB 1200

Танилцуулга

This manual provides essential information for the safe and effective use of your Lenz Lithium Pack rcB 1200. Please read it thoroughly before operating the device and retain it for future reference.

The Lenz Lithium Pack rcB 1200 is a lightweight, rechargeable battery pack designed to power various Lenz heated products, including socks, vests, bandages, and gloves. It offers adjustable heat settings and can be controlled via the pack itself or remotely using a smartphone via Bluetooth.

Багцын агуулга

Аюулгүй ажиллагааны зааварчилгаа

Төхөөрөмжийг гэмтээх, гэмтээхээс сэргийлэхийн тулд дараах аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөөрэй.

Тохиргоо

Батерейны багцыг цэнэглэж байна

Before first use, fully charge both Lithium Pack rcB 1200 battery packs.

  1. Connect the USB charging cable to the global USB-charger.
  2. Plug the USB-charger into a standard electrical outlet (100-240 VAC).
  3. Connect the charging cable to the charging port on each Lithium Pack rcB 1200. The charging port is typically located on the side or bottom of the pack.
  4. The charging indicator on the USB cable will show the charging status. A full charge typically takes several hours.
  5. Once fully charged, disconnect the battery packs from the charger.
Lenz Lithium Pack rcB 1200 battery packs and charging cable

Image: Two Lenz Lithium Pack rcB 1200 battery packs. One pack shows the power button and heat level indicators. The other pack shows the snap connectors. Below, a battery pack is shown connected to a charging cable.

Attaching to Heated Products

The Lithium Pack rcB 1200 attaches to compatible Lenz heated products using press studs.

  1. Locate the press studs on your Lenz heated socks, vest, bandage, or gloves.
  2. Align the press studs on the battery pack with those on the heated product.
  3. Firmly press the battery pack onto the product until the studs click into place, ensuring a secure connection.

Ашиглалтын заавар

Powering On/Off and Adjusting Heat Levels (Manual Control)

Each battery pack has a power button and indicators for heat levels.

  1. Асаахын тулд: Press and hold the power button (usually marked with a 'G' or power symbol) on the battery pack for a few seconds until the indicator lights illuminate.
  2. To Adjust Heat Level: Briefly press the power button to cycle through the three available heat settings. The indicator lights (1, 2, 3) will show the current heat level.
    • Level 1: Lowest heat setting.
    • Level 2: Medium heat setting.
    • Level 3: Highest heat setting.
  3. Унтраахын тулд: Press and hold the power button again for a few seconds until all indicator lights turn off.

Smartphone Control (Bluetooth Smart Ready)

The Lithium Pack rcB 1200 can be controlled remotely via a smartphone application.

  1. Download the official Lenz Heat App from your smartphone's app store (iOS or Android).
  2. Ухаалаг утсан дээрээ Bluetooth идэвхжсэн эсэхийг шалгаарай.
  3. Open the Lenz Heat App and follow the on-screen instructions to pair your Lithium Pack rcB 1200 battery packs. The app will guide you through the pairing process.
  4. Once paired, you can use the app to power the packs on/off, adjust heat levels, and monitor battery status.

Засвар үйлчилгээ

Цэвэрлэгээ

To clean the battery packs, gently wipe them with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the packs are completely dry before storing or recharging.

Хадгалах

When storing the battery packs for extended periods, ensure they are charged to approximately 50-70% capacity. Store them in a cool, dry place away from direct sunlight and extreme temperatures. Recharge them every 3-6 months to maintain battery health.

Алдааг олж засварлах

АсуудалБоломжит шалтгаанШийдэл
Battery pack not turning on.Батерей дуусч байна.Зайны багцыг бүрэн цэнэглэ.
Батерей цэнэглэхгүй байна.Charger or cable faulty; improper connection.Ensure charger and cable are properly connected. Try a different USB port or outlet. Verify charger is functional.
Heated product not heating.Battery pack not securely attached; battery pack not powered on; battery pack depleted.Ensure battery pack is securely attached via press studs. Power on the battery pack. Charge the battery pack.
Bluetooth-ээр холбогдож чадахгүй байна.Bluetooth not enabled on phone; battery pack not in pairing mode; app issue.Ensure Bluetooth is on. Restart battery pack and phone. Reinstall Lenz Heat App. Follow app pairing instructions carefully.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information and technical support, please refer to the official Lenz webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.

Үйлдвэрлэгч: Ленц

Webсайт: www.lenzproducts.com (Жишээ ньample холбоос, бодит холбоос өөр байж болно)

Холбогдох баримт бичиг - rcB 1200

Урьдчилсанview LENZ lithium pack rcB 1400 / rcB 2000 Body Heat System User Manual and Safety Instructions
Comprehensive safety precautions and operating instructions for the LENZ lithium pack rcB 1400 and rcB 2000 Body Heat System. Learn about charging, usage, safety features, and maintenance for optimal performance.
Урьдчилсанview Lenz литийн багц улавч rcB 1200 хэрэглэгчийн гарын авлага
Lenz лити улавч rcB 1200-ийн ашиглалт, аюулгүй байдал, засвар үйлчилгээний талаар дэлгэрэнгүй бичсэн хэрэглэгчийн дэлгэрэнгүй гарын авлага. Халдаг улавчаа хэрхэн ашиглах, арчлах талаар суралцаарай.
Урьдчилсанview LENZ Safety Instructions for Textile and Electronic Products
Safety instructions for LENZ products combining textile and electronics, emphasizing the use of compatible LENZ Lithium Packs and adherence to safety precautions to prevent electric shock, fire, and injury.
Урьдчилсанview LENZ Heated Apparel Safety and Care Instructions
Safety and care guidelines for LENZ heated apparel, detailing washing, drying, and usage with LENZ Lithium Packs to prevent electric shock, fire, and injury.