Technaxx TX-219 4-in-1 Multifunction Jump Starter, Air Compressor, Power Bank, and LED Light User Manual

1. Танилцуулга

This manual provides detailed instructions for the safe and effective use of your Technaxx TX-219 4-in-1 Multifunction Device. This versatile unit combines a jump starter, an air compressor, a power bank, and an LED light, designed for automotive and portable power needs. Please read this manual thoroughly before operation and retain it for future reference.

2. Аюулгүй ажиллагааны заавар

Always observe the following safety precautions to prevent injury or damage to the device or vehicle:

• Хэрэглэхийн өмнө бүх зааврыг уншина уу.
• Хүүхдийн гар хүрэхгүй газар хадгална.
• Wear eye protection when operating the jump starter.
• Төхөөрөмжийг бороо, чийгэнд бүү тавь.
• Do not operate if the device or cables are damaged.
• Ашиглалтын явцад агааржуулалтыг сайтар хангана.
• Үсрэх стартерыг холбоно ууamps correctly: positive to positive, negative to negative. Avoid short-circuiting.
• Хөлдөөсөн батерейг эхлүүлэх гэж бүү оролдоорой.
• Disconnect the jump starter from the vehicle battery within 30 seconds after the engine starts.
• Do not use the air compressor continuously for more than 10 minutes to prevent overheating. Allow it to cool down.
• Төхөөрөмжийг ашиглаагүй үед сэрүүн, хуурай газар хадгална.

3. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

• Technaxx Jump Starter TX-219 Unit
• Adapter Cable with Battery Clamps
• Хувьсах гүйдлийн адаптер
• Compressed Air Hose
• USB кабель
• Машины адаптерийн кабель
• Хэрэглэгчийн гарын авлага

Зураг 3.1: Дууслааview of the Technaxx TX-219 package contents, showing the main unit, battery clamps, various charging cables, and the air hose.

4. Бүтээгдэхүүн дууссанview

Familiarize yourself with the components of your Technaxx TX-219 device.

Зураг 4.1: Өнцөгтэй view of the Technaxx TX-219 unit, showing the digital display, control buttons, USB ports, and LED light.

Зураг 4.2: Топ view of the device, highlighting the power switch and the digital display for pressure readings.

Зураг 4.3: Урд view of the device, showing the digital display, pressure adjustment buttons, and the power indicator lights.

Гол бүрэлдэхүүн хэсгүүд:

• Дижитал дэлгэц: Shows air pressure for the compressor and battery status.
• Хяналтын товчлуурууд: For adjusting pressure settings and operating the device.
• USB-A Output Ports (5V/1A, 5V/2A): For charging external electronic devices.
• 15V/0.4A Input Port: For charging the internal battery of the TX-219.
• Jump Start Output Port: Connects to the battery clamp кабель.
• LED гэрэл: Гэрэлтүүлгийг хангана.
• Эрчим хүч солих: Төхөөрөмжийн асаах/унтраах удирдлага.
• Агаарын хоолойн холболт: For the air compressor function.

5. Setup and Charging the Device

Before first use, fully charge the Technaxx TX-219 unit. It is recommended to recharge the device every 3 months to maintain battery health.

1. Connect the AC adapter to the 15V/0.4A input port on the TX-219.
2. Хувьсах гүйдлийн адаптерийг стандарт залгуурт холбоно уу.
3. The battery indicator lights on the device will illuminate to show charging progress. All lights will be solid when fully charged.
4. Alternatively, use the car adapter cable to charge the device from a vehicle's 12V accessory socket.

Зураг 5.1: The Technaxx TX-219 unit being charged or used as a power bank to charge a smartphone.

6. Ашиглалтын заавар

6.1. Машинаа үсрэх

The TX-219 can jump start gasoline engines up to 4.0L and diesel engines up to 3.0L.

1. Ensure the TX-219 is sufficiently charged (at least 75% battery indicated).
2. Turn off the vehicle's ignition and all accessories.
3. Улаан (+) cl-г холбоно ууamp тээврийн хэрэгслийн аккумуляторын эерэг (+) терминал руу.
4. Хар (-) cl-г холбоно ууamp to a clean, unpainted metal part of the vehicle's engine block or chassis, away from the battery. Do not connect to the negative (-) battery terminal directly unless specified by vehicle manufacturer.
5. Connect the adapter cable to the jump start output port on the TX-219.
6. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
7. Once the engine starts, immediately disconnect the adapter cable from the TX-219.
8. Дараа нь хар (-) товчлуурыг салгаamp, followed by the red (+) clamp тээврийн хэрэгслийн батерейгаас.

Зураг 6.1: The Technaxx TX-219 connected to a vehicle battery using the provided clamps for jump starting.

Зураг 6.2: A close-up of the jump starter connected to a car battery, illustrating the process of jump starting.

6.2. Агаарын компрессор ашиглах нь

The integrated air compressor can inflate tires up to 3.5 Bar (approximately 50 PSI) and features an automatic shut-off.

1. Connect the compressed air hose to the air hose connection port on the TX-219.
2. Attach the other end of the hose to the tire valve.
3. Turn on the TX-219. The digital display will show the current tire pressure.
4. Use the '+' and '-' buttons to set the desired pressure. The display supports Bar, KPA, kg/cm², and PSI units.
5. Press the compressor start button to begin inflation.
6. Тогтмол даралтад хүрмэгц компрессор автоматаар зогсдог.
7. Disconnect the air hose from the tire valve and the TX-219.

Зураг 6.3: The Technaxx TX-219 being used to inflate a car tire, demonstrating the air compressor function.

Зураг 6.4: A user inflating a tire with the TX-219, showing the digital display and the air hose connection.

6.3. Power Bank болгон ашиглах

The 14000 mAh battery can charge various USB-powered devices.

1. Connect your device's USB charging cable to one of the USB-A output ports (5V/1A or 5V/2A) on the TX-219.
2. The TX-219 will automatically begin charging your device.
3. Monitor your device's charging status. Disconnect once fully charged.

Зураг 6.5: The Technaxx TX-219 connected to a smartphone via USB, illustrating its power bank functionality.

Зураг 6.6: The TX-219 acting as a portable power bank, charging a mobile device.

6.4. LED гэрлийг ашиглах

The integrated LED light can be used for illumination in dark environments.

• Locate the LED light button on the device.
• LED гэрлийг асаахын тулд товчлуурыг нэг удаа дарна уу.
• Press again to cycle through different light modes (e.g., steady, strobe, SOS, if available).
• Press and hold the button to turn off the LED light.

Зураг 6.7: The TX-219's LED light providing illumination in a vehicle's engine compartment.

7. Техникийн үзүүлэлтүүд

8. Засвар үйлчилгээ

• Цэвэрлэгээ: Төхөөрөмжийг зөөлөн, хуурай даавуугаар арчина. Химийн хүчтэй бодис, зүлгүүрийн цэвэрлэгч хэрэглэж болохгүй.
• Хадгалах: Store the TX-219 in a cool, dry place, away from direct sunlight and extreme temperatures.
• Цэнэглэж байна: Recharge the unit every three months, even if not in use, to prolong battery life.
• Кабелийн үзлэг: Regularly inspect all cables and clamps эвдрэл, элэгдэл, зэврэлтийн шинж тэмдгийг арилгах. Шаардлагатай бол солино уу.

9. Алдаа засах

10. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Technaxx webсайт. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.

Үйлдвэрлэгч: Technaxx

Загварын дугаар: 5031