CAD Audio WX1000HH UHF Wireless Handheld Microphone System

Танилцуулга

The CAD Audio WX1000HH is a frequency agile UHF wireless handheld microphone system designed for clear and reliable audio transmission. Operating in the 510-570mHz frequency band, it offers 100 selectable channels to ensure optimal signal clarity and minimize interference. This system features convenient auto-scan and IR sync functions for quick setup and channel changes. Built with durable all-metal construction, the WX1000HH is suitable for various demanding environments. This manual provides essential information for setting up, operating, and maintaining your wireless microphone system.

Багцын агуулга

Доор жагсаасан бүх зүйл таны багцад байгаа эсэхийг шалгана уу.

• WX1000HH Handheld Microphone Transmitter
• WX1000 UHF Wireless Receiver
• Хүлээн авагчийн цахилгаан адаптер
• Микрофоны клип
• Rack Mount Hardware
• Antenna Relocation Kit
• Audio Cable (likely 1/4" TS to 1/4" TS or XLR to 1/4" TS)
• Хэрэглэгчийн гарын авлага (энэ баримт бичиг)

Зураг 1: All components of the CAD Audio WX1000HH system, including the handheld microphone, receiver, power adapter, microphone clip, rack mount hardware, antenna relocation kit, and an audio cable.

Тохиргоо

1. Хүлээн авагчийн тохиргоо

1. Байршил: Position the WX1000 receiver on a stable, flat surface or install it into a standard equipment rack using the included rack mount hardware. Ensure adequate ventilation around the unit.
2. Антенны холболт: Connect the included antennas to the ANT connectors on the rear panel of the receiver. If rack-mounting, use the antenna relocation kit to position the antennas for optimal reception.
3. Эрчим хүчний холболт: Connect the supplied power adapter to the DC INPUT on the rear of the receiver and then plug it into a suitable AC power outlet.
4. Аудио гаралт: Connect the receiver's audio output (Balanced XLR or Unbalanced 1/4" TS) to your mixer, amplifier, or PA system using an appropriate audio cable.

Зураг 2: The WX1000 UHF Wireless Receiver shown with rack mount ears attached, ready for installation into an equipment rack.

Зураг 3: Rear panel of the WX1000 receiver, showing the ANT connectors, Balanced XLR output, Unbalanced 1/4" TS output, and DC INPUT for power.

2. Handheld Microphone Setup

1. Батерей суурилуулах: Unscrew the bottom cap of the handheld microphone. Insert two fresh AA batteries, observing the correct polarity (+/-) as indicated inside the battery compartment.
2. Хамгаалалтын таг: Screw the bottom cap back onto the microphone securely.

Зураг 4: The CAD Audio WX1000HH handheld microphone with its bottom cap removed, revealing the battery compartment for two AA batteries.

Ашиглалтын заавар

1. Асаах/унтраах

• Хүлээн авагч: Press the Power button on the front panel of the receiver. The display will illuminate.
• Гар микрофон: Press and hold the power button on the microphone body until the display illuminates.

2. Channel Selection and Synchronization (IR Sync)

The WX1000HH system features 100 switchable UHF frequencies and an auto-scan function to find clear channels. Up to 20 systems can be used simultaneously.

1. Автоматаар скан хийх: On the receiver, press the "SET" button to initiate an auto-scan. The receiver will search for and select an available, interference-free frequency.
2. IR синк: Once the receiver has selected a frequency, align the IR window on the handheld microphone with the IR sensor on the receiver (usually near the display). Press the "IR Sync" or "SET" button on the receiver (refer to receiver display for specific prompt). The frequency information will be transmitted to the microphone, synchronizing the two units.
3. Баталгаажуулалт: Confirm that the frequency displayed on the microphone matches the frequency on the receiver.

Зураг 5: Close-up of the CAD Audio WX1000HH handheld microphone's display, showing frequency and battery level indicators.

3. Батерейны түвшний үзүүлэлтүүд

Both the handheld microphone transmitter and the receiver feature battery level indicators. Monitor these indicators to ensure uninterrupted operation. The handheld microphone provides over 12 hours of operation with two AA batteries.

4. Үйл ажиллагааны хүрээ

The system offers an operating range of up to 295 feet (90 meters) between the transmitter and receiver under optimal conditions. Environmental factors, obstacles, and other wireless devices can affect this range.

5. Санал болгож буй хэрэглээ

This system is suitable for various applications including singing, speech, and karaoke.

Засвар үйлчилгээ

• Цэвэрлэгээ: Хүлээн авагч болон микрофоны гадна талыг зөөлөн, хуурай даавуугаар цэвэрлэ. Шингэн цэвэрлэгч эсвэл уусгагч хэрэглэж болохгүй.
• Зай солих: Replace AA batteries in the handheld microphone when the low battery indicator appears. Always use fresh, high-quality batteries. Remove batteries if the microphone will not be used for an extended period.
• Хадгалах: Системийг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.

Алдааг олж засварлах

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information and technical support, please refer to the official CAD Audio webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Худалдан авалтын баримтаа аливаа баталгаат нэхэмжлэлийг худалдан авсан баримт болгон хадгална уу.

CAD Audio Official Webсайт: www.cadaudio.com