Voxelab Aquila S3 3D Printer Instruction Manual

1. Тохиргоо

This section guides you through the initial setup of your Voxelab Aquila S3 3D printer, ensuring it is ready for its first print.

1.1 Сав баглаа боодол, анхны үзлэг

Сав баглаа боодолоос бүх эд ангиудыг болгоомжтой салга. Тээвэрлэлтийн явцад харагдахуйц гэмтэл байгаа эсэхийг шалгана уу. Сав баглаа боодлын жагсаалтад жагсаасан бүх эд анги байгаа эсэхийг шалгана уу.

Figure 1: The Voxelab Aquila S3 3D Printer, fully assembled.

1.2 Цахилгаан холболт ба хүчдэлtage Сонголт

Locate the power input and the voltage selection switch at the rear of the printer. Before connecting to power, ensure the voltage switch is set to match your local power supply (115V or 230V) to prevent damage to the unit. Connect the power cable securely.

1.3 Lead Screw Lubrication

For optimal performance and smooth vertical movement, it is recommended to apply a small amount of general-purpose white grease to the Z-axis lead screw. Distribute the grease evenly along the screw by manually moving the print head up and down.

1.4 Build Plate Installation and Leveling

The Aquila S3 features a PEI spring steel platform for excellent adhesion and easy print removal. Secure the build plate using the provided clips. The printer is equipped with a 25-point intelligent auto-leveling system. Perform the auto-leveling procedure as instructed on the display to ensure proper first layer adhesion.

Figure 2: The 25-point intelligent leveling system ensures precise bed calibration.

2. Operating Your Aquila S3

This section covers the basic operation of your Voxelab Aquila S3, from powering on to starting your first print.

2.1 Powering On and Display Interface

Нэг удаа ботьtage is correctly set and the power cable is connected, press the power button. The horizontal display will boot up, showing the Voxelab logo and then the main menu. The display is vibrant and navigation is primarily done via the rotary knob.

Figure 3: Key features of the Aquila S3, including high-temperature printing capabilities.

2.2 Ачаалж буй утас

Place your filament spool on the top-mounted spool holder. Guide the filament through the filament sensor (if equipped) and into the direct drive extruder. The all-metal dual-gear direct drive extruder provides a strong 70N extrusion force, ensuring smooth feeding, especially for flexible filaments like TPU.

Figure 4: The full-metal dual-gear direct extruder for reliable filament feeding.

2.3 Compatible Filaments and Nozzle

The Aquila S3 is equipped with an upgraded hardened nozzle capable of withstanding temperatures up to 300°C. This allows for printing with a wider variety of filaments, including ABS, PETG, PA, PLA, TPU, and wood. Ensure the correct temperature settings are selected for your chosen filament type.

Figure 5: The upgraded high-temp hardened hotend supports diverse filament materials.

2.4 Хэвлэх ажлыг эхлүүлэх

Insert your MicroSD card with the prepared G-code file into the slot on the front of the printer's base. Navigate to the 'Print' option on the display, select your file, and confirm to begin printing. The printer supports resume printing functionality in case of power loss.

Figure 6: The Aquila S3 in operation, demonstrating its printing capabilities.

3. Засвар үйлчилгээ

Regular maintenance ensures the longevity and consistent performance of your Voxelab Aquila S3 3D printer.

3.1 Lead Screw and Rod Cleaning

Periodically inspect and clean the Z-axis lead screw and smooth rods. Remove any dust or debris, and reapply a thin layer of appropriate grease or lubricant to the lead screw to maintain smooth vertical motion.

3.2 Build Plate Care

After each print, allow the PEI spring steel platform to cool down completely. Prints will typically pop off easily once cooled. Clean the surface with isopropyl alcohol to remove any residue and maintain optimal adhesion for future prints.

3.3 Экструдер ба цоргоны засвар үйлчилгээ

Regularly check the extruder gears for filament debris and clean as necessary. If you experience clogs or reduced extrusion, perform a cold pull or carefully clean the nozzle according to standard 3D printer maintenance practices. The hardened nozzle is designed for durability but proper care is still essential.

4. Алдаа засах

This section addresses common issues you might encounter with your Voxelab Aquila S3 and provides solutions.

• Принтер асахгүй байна: Double-check the power cable connection and verify that the 115V/230V voltage selection switch at the rear of the printer is correctly set for your region.
• Эхний давхаргын наалдац муу: Ensure the build plate is clean and free of oils or debris. Re-run the 25-point auto-leveling procedure. Adjust Z-offset if necessary.
• Filament Clogging: This can be caused by incorrect printing temperature, a dirty nozzle, or heat creep. Verify filament type and temperature settings. Perform a cold pull or clean the nozzle.
• Давхаргын шилжилт: Check that all belts (X and Y axes) are properly tensioned. Ensure the printer is on a stable surface to prevent vibrations.
• Дуу чимээтэй ажиллагаа: While the Aquila S3 features a silent N32 mainboard, excessive noise might indicate a need for lead screw lubrication or inspection of moving parts for obstructions.

5. Техникийн үзүүлэлтүүд

6. Баталгаат хугацаа ба дэмжлэг

Voxelab is committed to providing excellent customer service and support for your 3D printing journey.

6.1 Баталгаат хугацааны мэдээлэл

All Voxelab 3D printers are provided with a нэг жилийн баталгаат хугацаа худалдан авсан өдрөөс.

6.2 Техникийн туслалцаа

Voxelab offers насан туршийн техникийн туслалцаа for all its 3D printers. If you have any questions regarding product operation, software, or encounter any issues, please do not hesitate to contact the support team.

6.3 Холбоо барих мэдээлэл

• Имэйл: support@voxelab3dp.com
• Албан ёсны Webсайт: www.voxelab3dp.com
• Нийгмийн сүлжээ: Follow Voxelab on Instagram, Facebook, and YouTube for the latest news and updates.