NICREW C10 Plants LED Aquarium Light Instruction Manual

Бүтээгдэхүүн дууссанview

The NICREW C10 Plants LED Aquarium Light is designed to provide optimal lighting for aquatic plants, featuring a full spectrum, adjustable brightness, and a programmable day/night cycle. Its robust construction ensures durability and efficient heat management.

Image: NICREW C10 Plants LED Aquarium Light, designed to maximize plant growth potential.

Гол онцлогууд

• Маш сайн спектр: Combines 6500K white, 460nm blue, and TRUE 665nm deep red LEDs for efficient photosynthesis.
• Гэрэлтүүлгийг тохируулах боломжтой: Individual dimming from 0% to 100% for CH1 (white and red LEDs) and CH2 (blue LEDs), offering 10,000 color temperature combinations.
• Day+Night Cycle: Simulates natural day and night cycles with gradual ramp-up and dim-down features for sunrise and sunset.
• Nature-Centered Design: Gentle light transitions prevent startling fish. Light is completely off at night for fish rest.
• Water-Resistant and Effective Heat Management: Aluminum alloy body with heat sinks for durability and cooling.

Тохиргоо ба суурилуулалт

Follow these steps for initial setup and installation of your NICREW C10 Plants LED Aquarium Light.

Гэрэл суурилуулах

The light features adjustable mounting arms to fit various aquarium sizes. Simply extend the brackets to rest securely on the edges of your rimless tank.

Image: The NICREW C10 light with adjustable brackets, showing how it fits various aquarium sizes and its dimensions.

Хянагчийн тохиргоо

The C10 light includes an inline digital controller for easy programming. Refer to the video below for a detailed guide on setting up the controller.

First Time Setup (Reset to Factory Settings)

1. -г удаан дар Тохиргоо товчлуур болон Хүч button simultaneously for 3 seconds to reset the unit to default factory settings.

Одоогийн цагийг тохируулна уу

1. -г удаан дар Тохиргоо button for 3 seconds. The current time will begin to flash.
2. -г ашиглана уу + болон - цагийг тохируулах товчлуурууд.
3. дээр дарна уу Тохиргоо button to advance to the minutes setting.
4. -г ашиглана уу + болон - минут тохируулах товчлуурууд.
5. дээр дарна уу Тохиргоо button again to set the time. This will advance you to the sunrise time setting.

Set the Timer (Sunrise, Sunset, Sleep)

After setting the current time, the LCD display will flash the sunrise time. Follow these steps to set the timer and color spectrum:

1. -г ашиглана уу + болон - buttons to set the desired sunrise hour. Press Тохиргоо to save and advance to minutes. Repeat for minutes.
2. дээр дарна уу Тохиргоо button to move to the sunset time setting. Use + болон - to set hours and minutes.
3. дээр дарна уу Тохиргоо button to move to the sleep time setting. Use + болон - to set hours and minutes.
4. Зөвлөгөө: If you want to use only the day cycle and not the night cycle, press the Хүч button when the sleep time is flashing. Sleep time will change to OFF, and the night cycle will be disabled. The lights will begin to dim at sunset time and turn off completely after 15 minutes.

Set the Color Spectrum (Daylight and Moonlight)

After setting the sleep time, the LCD display will flash the daylight spectrum settings.

1. -г ашиглана уу + болон - buttons to set the brightness of the white and red LEDs (CH1).
2. дээр дарна уу Тохиргоо button to advance to the brightness of blue LEDs (CH2) setting.
3. -г ашиглана уу + болон - buttons to set the brightness of the blue LEDs.
4. дээр дарна уу Тохиргоо button. The moonlight color spectrum will be set, and the setup is complete.

Зураг: Ойролцоогоор view of the NICREW C10 controller, showing its clear display and intuitive buttons for easy programming.

Гэрэл ажиллуулах

Once programmed, the light will operate automatically according to your settings. You can also manually control the light or adjust brightness as needed.

Manual On/Off and Mode Cycling

If at any time you wish to turn your light on or off manually, simply press the Хүч товч. дээр дарна уу Хүч button again to cycle through different modes (e.g., full spectrum, blue only, off).

Гэрэлтүүлгийг тохируулах

When the light is on, you can adjust the brightness of the white/red LEDs (CH1) and blue LEDs (CH2) individually using the + болон - buttons. This allows for fine-tuning the light intensity and color temperature to suit your aquarium's needs.

Image: The controller display illustrating the individual dimming controls for Channel W (White & Red LEDs) and Channel B (Blue LEDs), allowing for precise brightness adjustments from 0% to 100%.

Image: A split aquarium view demonstrating the difference between vibrant daylight illumination and natural lunar-simulated moonlight, highlighting the light's versatile modes.

Засвар үйлчилгээ

Proper maintenance ensures the longevity and optimal performance of your aquarium light and the health of your aquatic environment.

Light Unit Care

• The light is constructed from aluminum alloy with heat sinks for efficient heat dissipation. This design helps keep the LEDs cool and extends their lifespan.
• The unit is water-resistant, designed to withstand daily splashes and humidity. However, avoid submerging the unit.
• Regularly wipe the light surface with a soft, damp cloth to remove dust and water spots, ensuring maximum light output.

Замагтай тэмцэх

Effective algae control is crucial for a healthy aquarium. The following practices are recommended:

• Proper Lighting Period: Limit aquarium lighting to 8-10 hours per day. Excessive light can promote algae growth.
• Усны тогтмол өөрчлөлт: Perform water changes of about 15-20% every other week to reduce nutrient buildup.
• Avoid Overfeeding the Fish: Observe your fish's food consumption and adjust meal sizes as needed to prevent excess food from decaying and contributing to algae.
• Choose the Location Wisely: Keep your aquarium away from direct sunlight, which can significantly increase algae growth.

Image: Visual guide offering tips on how to effectively control algae blooming in an aquarium, including proper lighting, water changes, feeding, and placement.

Алдааг олж засварлах

If you encounter issues with your NICREW C10 Plants LED Aquarium Light, try the following steps:

• Гэрэл асахгүй байна: Check all power connections. Ensure the adapter is securely plugged into both the light and the power outlet.
• Incorrect Timing/Brightness: Refer to the 'Setup and Installation' section to re-program the controller. You can also perform a factory reset as described in the 'First Time Setup' section.
• Анивчих гэрэл: Ensure the power supply is stable. If flickering persists, try resetting the unit.
• Хянагчийн дэлгэцийн асуудлууд: If the display is blank or unresponsive, check connections. A factory reset may resolve minor software glitches.

For persistent issues, please contact NICREW customer support.

Үзүүлэлтүүд

Баталгаат хугацаа

This NICREW C10 Plants LED Aquarium Light comes with a Үйлдвэрлэгчийн 1 жилийн баталгаат хугацаа. Баталгаат заргад зориулж худалдан авалтаа нотлох баримтаа үлдээнэ үү.

Дэмжлэг

For further assistance, technical support, or warranty inquiries, please visit the official NICREW webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу.