TOWODE WiFi Security Alarm System Kit (Model: Home Alarm System) - Instruction Manual
Тохируулах, ажиллуулах, засвар үйлчилгээ хийх цогц гарын авлага.
1. Бүтээгдэхүүн дууссанview
This Wireless Security System kit provides comprehensive protection for your home, office, or shop. It includes a WiFi loud speaker, door/window sensors, and remote controls, all managed via the Tuya App.
Image 1: Complete TOWODE WiFi Security Alarm System Kit components.
2. Үндсэн шинж чанарууд
- Иж бүрэн хамгаалалт: Includes 6 door/window alarm sensors, 2 remote controls, 1 WiFi loud speaker, and 1 power plug for a complete security solution.
- Intelligent Security Management: Operates on a 2.4 GHz WiFi connection and offers remote control through the Tuya App (Android and iOS) for easy mode changes and device management.
- Шуурхай анхааруулга: Sensors trigger a 120 dB loudspeaker alarm and send immediate notifications to your smartphone when doors or windows are opened.
- Өргөтгөх систем: Supports up to 20 remote controls and 30 additional sensors (e.g., motion, water leakage) with 433MHz wireless frequency (eV1527 code).
- 2.4 GHz WiFi Only: This product is exclusively compatible with 2.4 GHz WiFi networks and does not support 5G networks.
3. Тохиргоо ба суурилуулалт
3.1 Бүрэлдэхүүн хэсэг дууссанview
WiFi Loud Speaker
Зураг 2: Нарийвчилсан view of the WiFi Loud Speaker components.
Алсын удирдлага
Image 3: Remote control for arming, disarming, SOS, and ringtone functions.
Хаалга/цонхны мэдрэгч
Image 4: Wireless Door Alarm Sensor installation example.
3.2 Sensor Battery Installation
The door/window sensors come with batteries included, but an insulation sheet must be removed before first use. To replace the battery, follow these steps:
- Push the back panel of the sensor downward to remove it.
- Remove the insulation sheet or the old battery and install a new 12V battery (type 23A).
- Push the back panel upward to complete the installation.
Video 1: Demonstrates how to remove the insulation sheet and replace the battery in the D025 Door/Window Sensor (0:24-1:12).
3.3 App Configuration (Tuya Smart / Smart Life)
Before configuring the network, ensure your phone is connected to a 2.4 GHz WiFi network, Bluetooth is enabled, and Location Services are authorized for the Tuya Smart App.
Video 2: Guides through network configuration for the WiFi speaker using the Tuya Smart App (1:03-4:24).
3.4 Pairing Sensors and Remotes
3.4.1 Pairing with Standalone Speaker
- Unplug and plug the power cord of the standalone speaker three times to put it into pairing mode.
- Trigger the door sensor (open/close) within 6 seconds to pair.
- Unplug and replug the power cord to exit pairing mode.
Video 3: Demonstrates pairing a door sensor with a standalone speaker (1:13-1:25).
3.4.2 Pairing with WiFi Speaker via SET button
- Press the SET button on the WiFi speaker to put it into pairing mode.
- Trigger the door sensor (open/close) within 20 seconds to pair.
Video 4: Shows how to pair a door sensor with the WiFi speaker using the SET button (1:54-2:00).
3.4.3 Adding Accessories via App
To add additional sensors or remote controls through the Tuya App:
- Open the Tuya App and navigate to the 'Accessories' section.
- Press the '+' icon to enter pairing mode.
- Trigger the detector (e.g., open a door sensor, activate a motion sensor) or press a button on the remote control. The app will confirm successful addition.
Video 5: Demonstrates adding accessories like motion sensors and remote controls via the Tuya App (5:37-6:32).
3.5 Setting Detector Zone Modes
Each detector can be assigned a specific zone mode to determine how the WiFi Alarm Hub responds when triggered. The table below outlines the different modes:
| Detector Zone Mode | Зэвсэггүй болгох | Зугтах гар | Гэрийн гар |
|---|---|---|---|
| Ердийн | X | O | O |
| Саатал | X | O | O |
| Гэртээ | X | O | X |
| Home with Delay | X | O | X |
| 24 цаг | O | O | O |
| 24 Hours Silent | O | O | O |
| Унтраах | X | X | X |
Note: "X" means the WiFi Alarm Hub will not trigger, "O" means the WiFi Alarm Hub will trigger.
Video 6: Instructions on how to set detector zone modes via the Tuya App (6:33-7:54).
4. Үйл ажиллагаа
- Зэвсэглэх: Use the Tuya App or the remote control to set the system to 'Away Arm' (all sensors monitored) or 'Home Arm' (perimeter sensors monitored).
- Зэвсэггүй болгож байна: Use the Tuya App or the remote control to disarm the system.
- Мэдэгдэл: Receive real-time alerts on your smartphone when an alarm is triggered.
- Хуваарьт зэвсэглэл/зэвсэглэл: Configure automatic arming and disarming times through the Tuya App.
5. Алдаа засах
- Апп холболт байхгүй байна: Ensure your WiFi network is 2.4 GHz. This system is not compatible with 5G networks. Verify Bluetooth and Location Services are enabled and authorized for the app.
- Мэдрэгчүүд холбогдоогүй байна: Ensure the insulation sheet is removed from the sensor battery. Follow the pairing instructions carefully, ensuring the speaker is in pairing mode and the sensor is triggered within the specified time.
- Хуурамч дохиолол: Check sensor placement and ensure they are securely mounted. Avoid installing door contacts on metal doors, as this can interfere with operation.
- Алсын удирдлагатай холбоотой асуудлууд: Verify the remote control battery is functional. Ensure the remote is paired correctly with the system.
6. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | TOWODE |
| Загварын дугаар | Home Alarm System |
| Холболтын технологи | Wireless (2.4 GHz WiFi, 433MHz for sensors) |
| Дууны түвшин | 120 децибел |
| Хяналтын арга | Апп, Алсын удирдлага |
| Эрчим хүчний эх үүсвэр | Battery Powered (6 x 12V batteries included for sensors) |
| Материал | ABS |
| Бүтээгдэхүүний хэмжээс | 15.3 x 15.3 x 8.5 см |
| Зүйлийн жин | 690 гр |
| Суулгах арга | Screw-In/Self-Adhesive/Wall-Mounted |
