Бүтээгдэхүүн дууссанview
The Steinberg 100 Series Basin Mixer Faucet (Model 1001010S) is a high-quality single-lever faucet designed for basin installation. It features a modern matte black finish and is constructed from durable brass. This faucet is designed for standing installation and includes a fixed spout, a ceramic cartridge, and flexible G 3/8" connection hoses. It is compatible with instantaneous water heaters from 21 kW.
Image: The Steinberg 100 Series Basin Mixer Faucet in matte black, showcasing its sleek design and single-lever operation.
Багцын агуулга
Суулгаж эхлэхээсээ өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгаарай:
- 1 x Steinberg 100 Series Basin Mixer Faucet (Model 1001010S)
- 2 x Flexible connection hoses (G 3/8")
- Mounting hardware (nuts, washers, seals)
- Суулгах заавар
Тохиргоо ба суурилуулалт
Professional installation is recommended. Before installation, ensure the water supply is turned off. This faucet requires a single tap hole for mounting.
Шаардлагатай хэрэгслүүд (оруулаагүй):
- Тохируулах эрэг чангалах түлхүүр
- Халив
- Чигжээсний соронзон хальс (PTFE соронзон хальс)
- Bucket and cloth for spills
Суулгах алхамууд:
- Б бэлтгэasin: Ensure the mounting surface is clean and dry. The basin should have a single tap hole with a diameter suitable for the faucet's base.
- Хоолойг холбох: Screw the flexible G 3/8" connection hoses into the base of the faucet. Hand-tighten first, then use a wrench for a snug fit, being careful not to overtighten.
- Краныг суурилуулах: Insert the faucet's threaded rod and hoses through the tap hole in the basin. From underneath the basin, slide the rubber washer, metal washer, and then the mounting nut onto the threaded rod.
- Краныг бэхлэх: Align the faucet correctly on the basin and tighten the mounting nut securely with a wrench.
- Усан хангамжийн сүлжээнд холбогдох: Connect the flexible hoses to the hot and cold water supply lines. Use sealant tape on the threads of the supply lines for a watertight seal. Ensure the hot and cold connections are correct (typically red for hot, blue for cold).
- Нэвчилт байгаа эсэхийг шалгах: Slowly turn on the main water supply. Check all connections for leaks. If leaks are present, tighten the connections slightly.
Image: Technical drawing illustrating the dimensions and installation requirements of the Steinberg 100 Series Basin Mixer Faucet, including spout length and overall height.
Ашиглалтын заавар
The Steinberg 100 Series Basin Mixer Faucet features a single lever for controlling both water flow and temperature.
- Усны урсгал: Усны урсгалыг нэмэгдүүлэхийн тулд хөшүүргийг дээш өргө. Усны урсгалыг багасгахын тулд доошоо түлхэж, усыг хаа.
- Температурын хяналт: Move the lever to the left for hot water and to the right for cold water. The ceramic cartridge ensures smooth and precise temperature adjustment.
The integrated aerator ensures a soft, splash-free water stream and helps conserve water.
Засвар үйлчилгээ, арчилгаа
To ensure the longevity and appearance of your Steinberg faucet, follow these care instructions:
- Цэвэрлэгээ: Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for bathroom fixtures. Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can damage the matte black finish.
- Хатаах: After cleaning, always dry the faucet thoroughly with a soft, dry cloth to prevent water spots and mineral buildup.
- Агааржуулагчийн засвар үйлчилгээ: If water flow becomes weak or uneven, the aerator may be clogged with mineral deposits. Unscrew the aerator from the spout, clean it under running water, and remove any debris. Reinstall the aerator securely.
- Керамик хайрцаг: The ceramic cartridge is designed for long-lasting, drip-free performance. If you experience persistent dripping or difficulty in adjusting temperature, it may indicate a need for cartridge replacement. This should be performed by a qualified professional.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Усны урсгал бага | Clogged aerator; partially closed shut-off valves; kinked supply hose. | Clean or replace aerator; fully open shut-off valves; straighten supply hose. |
| Суурь дээр гоожиж байна | Loose mounting nut; damaged seal. | Tighten mounting nut; inspect and replace seals if damaged. |
| Цоргоноос дуслах | Элэгдсэн керамик хайрцаг. | Contact a qualified plumber for cartridge replacement. |
| Усны температурын асуудал | Incorrect hot/cold connections; issue with water heater. | Verify hose connections; check water heater functionality. |
If the problem persists after attempting these solutions, please contact Steinberg customer support or a qualified plumber.
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | 1001010S |
| Брэнд | Стейнберг |
| Өнгө | Мэтт Блэк |
| Материал | Гуулин |
| Загвар | Нэг хөшүүрэгтэй холигч |
| Суулгах арга | Single Hole (Standing) |
| Нийт өндөр | 150 мм |
| Spout Reach (Projection) | 100 мм |
| Тав тухтай бүс | 50 мм |
| Картриджийн төрөл | Керамик |
| Холболтын хоолой | 2x Flexible G 3/8" |
| Flow Rate (at 3 bar) | 6 л/мин |
| Тохиромжтой байдал | Suitable for instantaneous water heaters from 21 kW |
| Бүтээгдэхүүний хэмжээс | 7.5 x 18.5 x 29.5 см |
Баталгаат хугацааны мэдээлэл
Steinberg products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Steinberg website. Typically, warranty covers manufacturing defects under normal use and service.
Аливаа баталгаат нэхэмжлэлийн хувьд худалдан авалтаа нотлох баримтаа хадгална уу.
Хэрэглэгчийн дэмжлэг
For technical assistance, spare parts, or any questions regarding your Steinberg 100 Series Basin Mixer Faucet, please contact Steinberg customer support.
Webсайт: www.steinberg-armaturen.de
When contacting support, please have your model number (1001010S) and purchase date ready.
