1. Танилцуулга
Thank you for choosing the FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank. This device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for various electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.
Image 1.1: The FLYLINKTECH BD10 Jump Starter unit with its smart battery clamps.
2. Аюулгүй байдлын мэдээлэл
Always observe the following safety precautions to prevent injury or damage to the device or vehicle:
- Хөлдөөсөн батерейг үсэрч асаах гэж бүү оролдоорой.
- Зөв туйлшралын холболтыг (улаан cl) шалгана ууamp эерэг, хар clamp to negative). Reverse polarity can cause damage.
- Ухаалаг cl-г бүү зөвшөөрamps to touch each other when connected to the jump starter.
- Төхөөрөмжийг хүүхдээс хол байлга.
- Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
- Төхөөрөмжийг задлах, өөрчлөхийг хориглоно.
- Use only the provided smart clamps болон цэнэглэгч кабель.
- If the device becomes excessively hot during use, disconnect it immediately.
Image 2.1: The jump starter incorporates multiple safety features such as spark-proof, reverse polarity, overvoltage, short circuit, overload, and high-temperature protection.
3. Багцын агуулга
Бүх зүйл багцад байгаа эсэхийг шалгана уу:
- FLYLINKTECH BD10 Jump Starter Unit
- Ухаалаг зай Clamps
- USB-C-аас USB-C кабель
- USB-A-аас USB-C кабель
- 12V DC машины цэнэглэгч адаптер
- Хэрэглэгчийн гарын авлага
- Хадгалах хайрцаг
Image 3.1: The complete package includes the jump starter, smart clamps, various cables, user manual, and a protective storage case.
4. Тохиргоо болон цэнэглэх
4.1 Анхны төлбөр
Before first use, fully charge the jump starter. The device features a 26800mAh battery capacity.
- Connect the provided USB-C cable to the jump starter's USB-C input port.
- Connect the other end of the cable to a compatible USB wall charger (not included). For fastest charging, use a PD 45W charger.
- The LED screen will display the charging status and battery percentage.
4.2 Charging Times
| Цэнэглэгчийн үнэлгээ | Ойролцоогоор цэнэглэх хугацаа |
|---|---|
| 5W | 18 цаг |
| 18 Вт | 7 цаг |
| 45 Вт | 2 цаг |
Note: A 45W wall charger is not included in the package.
Image 4.1: The device supports PD 45W fast charging, significantly reducing recharge time when using a compatible charger.
5. Ашиглалтын заавар
5.1 Машинаа үсрэх
The FLYLINKTECH BD10 is capable of jump-starting all gas engines and diesel engines up to 12.0L.
- Хангалттай төлбөрийг хангах: Check the jump starter's LED screen to ensure it has at least 50% charge.
- Ухаалаг Cl-г холбоно ууamps: Insert the blue plug of the smart clamps into the jump starter's 12V output port. Ensure a firm connection.
- Машины аккумуляторт холбогдох:
- -ийг хавсаргана уу улаан (+) clamp тээврийн хэрэгслийн эерэг батерейны терминал руу.
- -ийг хавсаргана уу хар (-) clamp тээврийн хэрэгслийн батерейны сөрөг терминал руу.
- Шалгах үзүүлэлт: ухаалаг clamp indicator light should turn solid green, indicating a correct connection. If it flashes or shows red, check connections and battery status.
- Press BOOST (if needed): If the vehicle battery is extremely low or completely dead, press the 'BOOST' button on the jump starter. Wait for the indicator light on the smart clamps to turn solid green.
- Машин эхлүүлэх: Attempt to start your vehicle. If it doesn't start on the first try, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
- Cl-г устгаamps: Тээврийн хэрэгсэл асмагц ухаалаг товчлуурыг нэн даруй салгаamps from the car battery, then disconnect them from the jump starter.
Image 5.1: The jump starter connected to a car battery, ready for operation. It supports 6000A peak current, 12V output, and is suitable for a wide range of engines.
Image 5.2: Visual guide illustrating the four steps to jump-start a vehicle: connect the plug, attach clamps, press boost, and start the engine.
5.2 Power Bank функц
The BD10 can charge multiple electronic devices via its USB-A and USB-C ports.
- USB1 гаралт: Up to 18W (max)
- USB2 гаралт: Up to 18W (max)
- USB-C гаралт: 45 Вт хүртэл (PD)
Connect your device using the appropriate USB cable to the desired output port. The LED screen will show 'OUT' and the wattage being drawn.
Image 5.3: The jump starter functioning as a power bank, simultaneously charging a smartphone and a tablet via its USB ports.
5.3 LED гар чийдэн
The built-in LED flashlight offers three modes: constant light, SOS signal, and strobe light.
- Press and hold the flashlight button to turn on the constant light.
- Press the button again to cycle through SOS and strobe modes.
- Унтраахын тулд дахин удаан дарна уу.
Image 5.4: The integrated LED flashlight provides illumination, an SOS signal, and a strobe function for emergency situations.
5.4 Informative LED Screen
The 6.0-inch LED screen provides real-time information about the device's status:
- Батерейны түвшин: Үлдсэн батерейны хувийг харуулнаtage.
- IN/OUT Indicator: Shows whether the device is charging (IN) or discharging (OUT).
- Ватtage Дэлгэц: Indicates the power (W) being drawn or supplied.
- Алдааны анхааруулга: Displays specific error codes or symbols if an issue occurs.
Image 5.5: The 6.0-inch LED screen provides clear information on battery percentage, input/output status, and power consumption.
6. Засвар үйлчилгээ
- Тогтмол цэнэглэх: To prolong battery life, recharge the jump starter every 3-6 months, even if not in use.
- Хадгалах: Store the device in its protective case in a cool, dry place, away from direct sunlight and moisture.
- Цэвэрлэгээ: Төхөөрөмжийг зөөлөн, хуурай даавуугаар арчина. Химийн хатуу бодис, зүлгүүрийн материалыг бүү ашигла.
- Clamp Арчилгаа: Ухаалаг cl-ийг баталгаажуулна ууamps нь хэрэглэхийн өмнө болон дараа цэвэрхэн бөгөөд зэврэлтгүй байдаг.
7. Алдаа засах
The device features multiple alarm situations indicated by audible signals and screen displays:
- Бага ботьtage Хамгаалалт: Audible signal "3". Recharge the device.
- Гадаад ботьtage Exceeds Vehicle Voltage: Audible signal "4". Check vehicle battery voltage.
- Богино залгааны хамгаалалт: Audible signal "5". Check clamp connections for short circuits.
- Safety Mode Activated: Audible signal "6". Device has entered safety mode due to an issue.
- Хэт гүйдлийн хамгаалалт: Audible signal "7". Reduce load or check connections.
- Өндөр/бага температурын дохиолол: Audible signal "8". Allow device to return to operating temperature range (-20°C to 60°C).
- Reverse Connection: Audible signal "9". Correct the clamp туйлшрал.
Зураг 7.1: Дууслааview of the device's multi-alarm system, indicating various protection states with unique audible signals.
Хэрэв эдгээр алхмуудыг хийсний дараа асуудал арилахгүй бол хэрэглэгчийн дэмжлэгтэй холбогдоно уу.
8. Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Брэнд | FLYLINKTECH |
| Загвар | BD10 |
| Оргил гаралтын гүйдэл | 6000 Ampээ |
| Зайны багтаамж | 26800 мАч |
| Гаралтын ботьtage | 12 В |
| USB-C оролт/гаралт | PD 45 Вт |
| USB-гаралт | 18 Вт (хамгийн их) |
| Холбогдох хөдөлгүүрийн төрлүүд | All Gas, up to 12.0L Diesel |
| Ашиглалтын температур | -20°C - 60°C (-4°F - 140°F) |
| Бүтээгдэхүүний хэмжээс | 23.95 x 10 x 5.69 см |
| Зүйлийн жин | 920 гр |
Image 8.1: The device is designed to operate reliably in extreme climates, from -20°C (-4°F) to 60°C (140°F).
9. Баталгаат хугацаа ба дэмжлэг
FLYLINKTECH is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH webсайт. Баталгаат хугацааны зорилгоор худалдан авалтын баримтаа хадгална уу.
