Танилцуулга
Thank you for choosing the Rocketfish Tilting TV Wall Mount. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Designed for 32-inch to 90-inch flat-panel televisions, this mount offers a secure and low-profile solution with convenient fingertip tilt adjustment for optimal viewing angles. Please read this manual thoroughly before beginning installation and retain it for future reference.
Image: Rocketfish Tilting TV Wall Mount, front view.
Аюулгүй байдлын мэдээлэл
Improper installation or use of this product can result in serious injury or damage. Please observe the following safety precautions:
- Бүх зааврыг уншина уу: Ensure you understand all instructions and warnings before installation. If you have any questions, contact customer support.
- Жингийн багтаамж: Do not exceed the maximum weight capacity of 130 lbs (59 kg). This mount is designed for TVs between 32 and 90 inches.
- Ханын төрөл: This mount is designed for installation on wood stud walls or solid concrete/brick walls. Do not install on drywall alone.
- Мэргэжлийн суурилуулалт: If you are unsure about your ability to install this mount safely, seek assistance from a qualified professional.
- Бүрэлдэхүүн хэсгүүдийн шалгалт: Before installation, verify that all components are present and undamaged. Do not use damaged parts.
- Хэт чангалахаас зайлсхийх: Do not over-tighten screws, as this may cause damage to the mount or your TV.
- Хүүхдүүд: Хүүхдийг суулгах газраас хол байлга.
Багцын агуулга
Carefully unpack the box and ensure all items listed below are present and undamaged. If any parts are missing or damaged, do not attempt to install the mount. Contact Rocketfish customer support for assistance.
- Ханын хавтангийн угсралт
- TV Bracket Arms (2)
- Тоног төхөөрөмжийн иж бүрдэл (төрөл бүрийн эрэг, жийргэвч, зай авагч, зангуу)
- Зааварчилгааны гарын авлага
Тохиргоо ба суурилуулалт
Шаардлагатай хэрэгслүүд (оруулсангүй)
- Филлипсийн толгой халив
- Drill with appropriate drill bits (wood or masonry)
- Шатны хайгч (модон тулгуур суурилуулах зориулалттай)
- Түвшин
- Харандаа
- Соронзон хальсны хэмжүүр
- Алх (бетон зангуунд зориулсан)
Суулгахын өмнөх хяналтын хуудас
- ТВ-ийн нийцтэй байдал: Verify your TV's VESA mounting pattern and weight are within the mount's specifications (32"-90" and up to 130 lbs).
- Ханын бүтэц: Ensure the wall can safely support the combined weight of the mount and your TV.
- Байршил: Choose a mounting location free from electrical wires, water pipes, or other hazards.
Image: Visual representation of TV compatibility for the mount.
Алхам алхмаар суурилуулах
- Locate Wall Studs (Wood Stud Installation): Use a stud finder to locate the edges and center of two adjacent wood studs. Mark the center of the studs at the desired height for the top of your TV. Ensure the marks are level.
- Өрөмдлөгийн цэгүүдийг тэмдэглэх: Hold the wall plate against the wall, aligning its center with your marked stud centers. Use a level to ensure the wall plate is perfectly horizontal. Mark the drilling points through the holes on the wall plate.
- Өрөмдлөгийн цооног: For wood studs, drill pilot holes using a 7/32" (5.5 mm) drill bit to a depth of 2.2" (55 mm). For concrete/brick walls, use a 3/8" (10 mm) masonry drill bit to a depth of 2.4" (60 mm) and insert concrete anchors.
- Ханын хавтанг хавсаргах: Secure the wall plate to the wall using the provided lag bolts and washers. Tighten the bolts firmly but do not over-tighten.
- ТВ-ийн хаалтуудыг ТВ-д хавсаргах: Carefully place your TV face down on a soft, clean surface. Attach the two TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
- Зурагтыг хананд өлгөх: With assistance, carefully lift the TV and hook the TV bracket arms onto the top edge of the wall plate. Gently lower the TV until the brackets engage with the wall plate.
- Аюулгүй ТВ: Locate the locking screws or mechanisms on the bottom of the TV bracket arms. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.
- Налууг тохируулах: Loosen the tilt tension knob(s) on the mount (if applicable) to adjust the TV to your desired viewing angle. Once set, tighten the knob(s) to secure the tilt position.
Хазайлтын функцийг ажиллуулах
The Rocketfish Tilting TV Wall Mount features fingertip tilt technology, allowing you to easily adjust your TV's vertical viewing angle. To tilt your TV:
- Loosen Tension: Locate the tilt tension knob(s) on the side or bottom of the TV bracket arms. Turn the knob(s) counter-clockwise slightly to loosen the tension.
- Өнцөг тохируулах: Gently push or pull the bottom of your TV to achieve the desired upward or downward tilt angle.
- Аюулгүй байрлал: Once the desired angle is achieved, turn the tilt tension knob(s) clockwise to tighten and secure the TV in place. Ensure the TV is stable before releasinг.
Image: Close-up of the tilt tension knob for adjustment.
Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны телевизийн хананд суурилуулсан төхөөрөмжийн удаан эдэлгээтэй, аюулгүй ажиллагааг хангахад тусална.
- Цэвэрлэгээ: Суурилуулалтыг зөөлөн, хуурай даавуугаар арчина. Зүлгүүрийн цэвэрлэгч эсвэл уусгагч хэрэглэж болохгүй, учир нь тэдгээр нь өнгөлгөөг гэмтээж болзошгүй.
- Тогтмол шалгалт: Periodically check all screws and connections to ensure they remain tight and secure. If any looseness is detected, re-tighten them immediately.
- Гэмтлийн үзлэг: Inspect the mount for any signs of damage or wear. If any damage is found, do not use the mount and contact customer support.
Алдааг олж засварлах
If you encounter issues with your Rocketfish TV wall mount, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| ТВ түвшин биш байна. | Суулгах явцад хананы хавтан тэгш биш байна. | Remove TV, loosen wall plate screws, adjust with a level, and re-tighten. |
| Уул нь ханан дээр сул байгаа мэт санагддаг. | Хоцролтын боолт бүрэн чангалагдаагүй эсвэл ханын зангууг буруу ашигласан байна. | Ensure lag bolts are securely tightened into studs/anchors. Verify correct anchors for wall type. |
| TV tilt is too stiff or too loose. | Хазайлтын чангалах товчлуурыг тохируулах шаардлагатай. | Adjust the tilt tension knob(s) as described in the "Operating the Tilt Feature" section. |
| ТВ нь бэхэлгээнд тохирохгүй байна. | Incorrect VESA pattern or TV weight exceeds capacity. | Verify your TV's VESA pattern and weight against the mount's specifications. This mount supports 32"-90" TVs up to 130 lbs. |
If the problem persists or is not listed here, please contact Rocketfish customer support.
Үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Брэнд | Пуужин загас |
| Загварын дугаар | RF-TVMLPT03V3 |
| Суурилуулах төрөл | Ханын бэхэлгээ |
| Хөдөлгөөний төрөл | Налуу |
| Тохиромжтой ТВ-ийн хэмжээ | 32 - 90 инч |
| Хамгийн их жингийн багтаамж | 130 фунт (59 кг) |
| Материал | Either Aluminum, Stainless Steel, or Alloy Steel |
| Бүтээгдэхүүний хэмжээс | 2 x 26.49 x 17.4 инч |
| Зүйлийн жин | 6 фунт |
| Бага Profile Дизайн | Positions TV 1.9" from the wall |
Баталгаат болон дэмжлэг
Rocketfish products are designed for quality and reliability. For specific warranty information, please refer to the warranty card included with your product or visit the official Rocketfish website. If you require technical assistance, have questions about installation, or need to report missing/damaged parts, please contact Rocketfish customer support. Have your product model number (RF-TVMLPT03V3) and purchase information ready when contacting support.
You can often find support contact information on the Rocketfish official webсайт эсвэл бүтээгдэхүүнийг худалдан авсан жижиглэн худалдаалагчаар дамжуулан.
