AVI-8 P-51 Mustang Blakeslee AV-4077 Chronograph Pilot Watch Instruction Manual

1. Танилцуулга

This manual provides essential instructions for the setup, operation, and maintenance of your AVI-8 P-51 Mustang Blakeslee AV-4077 Chronograph Pilot Watch. Please read this manual thoroughly to ensure proper use and longevity of your timepiece.

The AVI-8 P-51 Mustang Blakeslee watch features a 43mm stainless steel case with a black PVD finish and a scratch-resistant mineral crystal lens with anti-reflective coating. It is powered by a Japanese Meca-Quartz chronograph movement, offering precise timekeeping with luminous hands and markers for readability. The watch is water-resistant up to 50 meters and comes with a genuine black leather strap with a classic buckle closure.

Зураг 1.1: Урд view of the AVI-8 P-51 Mustang Blakeslee AV-4077 Chronograph Pilot Watch.

2. Бүтээгдэхүүний онцлог ба бүрэлдэхүүн хэсгүүд

• Кейсийн материал: Зэвэрдэггүй ган
• Хүрээ: Fixed Bezel
• Линз: Mineral Lens with Anti-Reflective Coating
• Хамтлаг: 22mm Genuine Leather Strap
• Хөдөлгөөн: Japanese Meca-Quartz Chronograph
• Титэм: Татаж авах
• Кейсийн диаметр: 43 мм
• Усны эсэргүүцэл: 50 сая

Image 2.1: Detailed diagram illustrating the key features and components of the Blakeslee Chronograph.

Image 2.2: The watch dial showcasing its luminous hands and markers for enhanced visibility in low-light conditions.

3. Тохиргоо

3.1 Анхны тохиргоо болон цагийн тохиргоо

1. Before setting the time, ensure any plastic tab protecting the crown is removed.
2. Gently pull the crown (located on the right side of the watch case) out to its outermost position. This will stop the second hand.
3. Титэмийг цагийн зүүний дагуу эсвэл цагийн зүүний эсрэг эргүүлж, цаг, минутын зүүг хүссэн цагтаа тохируулна уу.
4. Цагийг тохируулсны дараа титмийг анхны байрлалд нь буцааж түлхэнэ. Секунд гар хөдөлгөөнийг үргэлжлүүлнэ.

3.2 Огноо тохируулах

1. Pull the crown out to the first click position (if applicable, otherwise use the outermost position).
2. Rotate the crown to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this may interfere with the automatic date change mechanism.
3. Once the date is set, push the crown back into its original position.

4. Хронографыг ажиллуулах

Your AVI-8 AV-4077 watch features a chronograph function for measuring elapsed time. The chronograph typically uses dedicated pushers on the side of the watch case.

4.1 Хронографыг асаах болон зогсоох

1. Press the top pusher (usually located at the 2 o'clock position) to start the chronograph. The chronograph second hand will begin to move.
2. To stop the chronograph, press the top pusher again. The chronograph hands will stop, indicating the elapsed time.

4.2 Хронографыг дахин тохируулах

1. After stopping the chronograph, press the bottom pusher (usually located at the 4 o'clock position) to reset the chronograph hands to their zero positions.

5. Засвар үйлчилгээ

5.1 Усны эсэргүүцэл

Your AVI-8 AV-4077 watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming, showering, or washing hands. It is NOT suitable for diving, snorkeling, or prolonged water exposure. Always ensure the crown is fully pushed in before any contact with water.

5.2 Цэвэрлэгээ

To maintain the appearance of your watch, wipe the case and crystal with a soft, dry cloth. For the leather strap, avoid excessive moisture and harsh chemicals. Clean with a damp cloth and allow to air dry naturally.

5.3 Оосрын арчилгаа

The genuine leather strap may show signs of wear over time. To prolong its life, avoid prolonged exposure to direct sunlight, extreme temperatures, and moisture. If the strap becomes wet, dry it thoroughly before wearing.

6. Алдаа засах

6.1 Watch Not Running or Intermittent Operation

• Титэм бүрэн дотогшоо орсон эсэхийг шалгана уу. Хэрэв татаж гаргавал цаг ажиллахгүй.
• The Meca-Quartz movement requires a battery. If the watch stops completely, the battery may need replacement. Contact a qualified watch technician for battery replacement.

6.2 Хронографын гар тэг рүү шилжихгүй байна

If the chronograph hands do not return precisely to the 12 o'clock (zero) position after resetting, they may need calibration. This can sometimes occur after a battery change or impact.

1. Pull the crown out to the outermost position (time setting position).
2. Press the top pusher repeatedly to advance the chronograph second hand until it aligns with the 12 o'clock position.
3. If other chronograph sub-dials are misaligned, use the bottom pusher to adjust them to their zero positions.
4. Бүх хронографын гарнууд зэрэгцсэний дараа титэмийг хэвийн ажиллах байрлалд нь буцааж түлхэнэ.

7. Техникийн үзүүлэлтүүд

8. Баталгаат хугацаа ба дэмжлэг

For warranty information and customer support, please refer to the documentation included with your product packaging or visit the official AVI-8 webсайт. Аливаа баталгаат нэхэмжлэлийн хувьд худалдан авалтаа нотлох баримтаа хадгалаарай.