IRRADIO Simplified Universal Remote Control with Learning Function

1. Танилцуулга

This manual provides detailed instructions for the setup, operation, and maintenance of your IRRADIO Simplified Universal Remote Control. This remote is designed for ease of use, featuring a learning function to replicate commands from your original remote control. Its simplified layout and large buttons make it suitable for users of all ages.

2. Бүтээгдэхүүн дууссанview

The IRRADIO Simplified Universal Remote Control is an infrared remote with a minimalist design. It features essential buttons for common functions, making it straightforward to operate.

Зураг 2.1: Урд view of the IRRADIO Simplified Universal Remote Control. It features large, clearly labeled buttons for power, volume, channel, and two programmable auxiliary buttons (A and B).

Товчлуурын функцууд:

• Цахилгаан товч (улаан): Төхөөрөмжийг асаах эсвэл унтраана.
• AV Button (Mute): Toggles audio mute or switches AV input (programmable).
• V+ / V-: Дууны хэмжээг ихэсгэх буюу багасгах.
• P+ / P-: Сувгуудыг дээш эсвэл доош нь өөрчилдөг.
• A / B Buttons: Two additional programmable buttons for frequently used functions.
• Indicator LED (Red dots): Lights up during button press and programming.

3. Тохиргоо: Батерей суурилуулах

The remote control requires 2x AAA/LR03 1.5V batteries (not included).

1. Алсын удирдлагын ар талд байгаа зайны тасалгааг ол.
2. Зайны тасалгааны тагийг гулсуулж нээнэ үү.
3. Insert two AAA/LR03 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Зайны тасалгааны тагийг сайтар хаа.

Жич: The remote retains programmed memory even after battery replacement.

4. Operating Instructions: Programming the Remote Control

This universal remote uses a learning function to copy signals from your original remote control. You will need a functional original remote for programming.

Програмчлалын алхамууд:

1. Бэлтгэл: Place the IRRADIO universal remote and your original remote control on a flat surface, facing each other, with their infrared emitters aligned at a distance of approximately 1-3 cm.
2. Сурах горимд орно уу: -г удаан дар Хүч товчлуур болон AV button simultaneously on the IRRADIO remote for about 3 seconds. The red indicator LED will light up continuously, indicating the remote is in learning mode.
3. Програмчлах товчийг сонгоно уу: Press the button on the IRRADIO remote that you wish to program (e.g., V+, P+, A, B). The red indicator LED will start blinking slowly, waiting for a signal.
4. Дамжуулах дохио: Press and hold the corresponding button on your original remote control (e.g., Volume Up, Channel Up). Keep holding it until the IRRADIO remote's LED blinks rapidly three times and then lights up continuously again. This indicates successful learning.
5. Program More Buttons: Repeat steps 3 and 4 for each button you wish to program.
6. Сургалтын горимоос гарах: Once all desired buttons are programmed, press the Хүч button on the IRRADIO remote to exit learning mode. The red indicator LED will turn off.

Чухал тэмдэглэл:

• If the LED does not blink rapidly or turns off during programming, the learning process may have failed. Try again, ensuring proper alignment and battery levels in both remotes.
• Ensure the original remote has sufficient battery power for signal transmission.
• The remote can be reprogrammed infinitely.

5. Засвар үйлчилгээ

Зай солих:

When the remote control's response becomes sluggish or the indicator LED does not light up, it is time to replace the batteries. Follow the battery installation steps in Section 3.

Цэвэрлэгээ:

Алсын удирдлагыг цэвэрлэхийн тулд зөөлөн, хуурай даавуу ашиглаарай. Зүлгүүрийн цэвэрлэгч, уусгагч эсвэл нойтон даавуу бүү ашиглаарай, учир нь эдгээр нь гадаргуу эсвэл дотор эд ангиудыг гэмтээж болзошгүй.

6. Алдаа засах

• Алсын удирдлага хариу өгөхгүй байна:
  • Батерейг зөв туйлшралтайгаар зөв оруулсан эсэхийг шалгана уу.
  • Replace old batteries with new AAA/LR03 batteries.
  • Алсын удирдлага болон төхөөрөмжийн хооронд ямар ч саад бэрхшээл байхгүй эсэхийг шалгаарай.
• Learning function fails:
  • Ensure the original remote control is working and has sufficient battery power.
  • Verify that the IRRADIO remote and the original remote are aligned correctly, facing each other at a close distance (1-3 cm).
  • Make sure you are pressing and holding the buttons for the required duration during programming.
  • Try programming in a room with less ambient light, as strong light sources can sometimes interfere with IR signals.
• Programmed button does not work:
  • The learning process might not have been successful for that specific button. Repeat the programming steps for that button.
  • Ensure the original remote's signal was strong and clear during programming.

7. Техникийн үзүүлэлтүүд

8. Баталгаат хугацаа ба дэмжлэг

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Irradio webсайт. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.