Танилцуулга
Вampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
Бүтээгдэхүүн дууссанview
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.
Зураг 1: Урд view -ийн Вampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.
Зураг 2: Өнцөгтэй view -ийн Вampler Catacombs pedal, highlighting its compact design and various control knobs.
Тохиргоо
Эрчим хүчний шаардлага
Вampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
Connecting Your Pedal
- Хөгжмөө (жишээ нь, гитар) холбоно уу MONO IN or СТЕРЕО IN стандарт 1/4 инчийн багажны кабель ашиглан дөрөөний баруун талд байрлах домкратыг холбоно уу.
- -г холбоно уу MONO OUT or СТЕРЕО ГАРАЛТ дөрөөний зүүн талд байгаа үүрийг чинийх рүү чиглүүл ampөргөгч эсвэл дараагийн эффектийн дөрөө.
- Connect the 9V DC power supply to the 9V DC оролтын үүр.
- For MIDI control, connect a MIDI cable to the MIDI оролт.
Ашиглалтын заавар
Хяналтview
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Shapes the tone of the delay repeats.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- Tap Tempo Footswitch: Taps in the desired delay tempo.
Урьдчилсан тохиргоог хадгалах болон буцаах
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
Засвар үйлчилгээ
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Дөрөөг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
- Удаан хугацаагаар ашиглаагүй үед цахилгааныг салга.
- Бүх кабелийн холболтууд найдвартай бэхлэгдсэн эсэхийг тогтмол шалгаж байгаарай.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Педаль дарахад дуу гарахгүй. | Incorrect power supply, faulty cables, incorrect input/output connections. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| Effect is too subtle or too extreme. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Cannot save or recall presets. | Хөлийн шилжүүлэгчийн буруу ажиллагаа. | Ensure you are holding the Preset/Save footswitch long enough to save. For recalling, use short presses. |
| Noise or hum. | Газардуулгын гогцоо, цахилгаан хангамжийн эвдрэл, хөндлөнгийн оролцоо. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
Үзүүлэлтүүд
- Загвар: CATACOMBS
- Хэмжээ: 7.25 x 5.7 x 3.75 инч
- Барааны жин: 1.39 фунт
- Эрчим хүчний эх үүсвэр: Corded Electric (9V DC, center-negative, power supply not included)
- Дохионы формат: Аналог
- Audio Output Effects: Саатал, Reverb
- Sampханш: 48 кГц
- Audio Bit Depth: 24-бит
- Урьдчилан тохируулсан зүйлс: 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
Баталгаат болон дэмжлэг
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official WampДөрөө webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.
Нэмэлт тусламж авахыг хүсвэл зочилно уу Wampler Store on Amazon.
