Танилцуулга
Thank you for choosing the CREWORKS 1.8L Digital Ultrasonic Cleaning Machine. This device utilizes ultrasonic cavitation to provide thorough and efficient cleaning for a variety of items, including jewelry, glasses, tools, and more. Please read this manual carefully before operation to ensure proper use, optimal performance, and safety.
Аюулгүй ажиллагааны зааварчилгаа
To prevent injury or damage to the unit, always adhere to the following safety guidelines:
- Бүү задалж болохгүй the unit. Refer all servicing to qualified personnel.
- Хараа хяналтгүй хэрэглэж болохгүй. Always supervise the cleaning process.
- Always ensure there is sufficient fluid in the tank before operating the machine. Operating without fluid can damage the unit.
- Машиныг салга from the power outlet before filling, draining, or performing any maintenance.
- Төхөөрөмжийг хүүхэд, тэжээвэр амьтнаас хол байлга.
- Do not immerse the main body of the unit in water or other liquids.
- Use only appropriate cleaning solutions or water. Avoid flammable, corrosive, or abrasive liquids.
- Цахилгааны утас гэмтээгүй, газардуулгатай залгуурт зөв холбогдсон эсэхийг шалгаарай.

Бүтээгдэхүүн дууссанview
The CREWORKS JX-010S is a robust ultrasonic cleaner designed for various applications. It features a durable 304 stainless steel tank and housing, a digital control panel for precise temperature and timer settings, and recessed handles for easy portability.
Бүрэлдэхүүн хэсгүүд
- Үндсэн нэгж: Houses the ultrasonic transducer, heating element, and control circuitry.
- Зэвэрдэггүй ган сав: The reservoir for cleaning fluid.
- Таг: Helps contain heat and reduce noise during operation.
- Тортой сагс: Used to hold items during cleaning, preventing them from resting directly on the tank bottom.
- Цахилгааны утас: Цахилгааны залгуурт холбох зориулалттай.

Хяналтын самбар
The digital control panel allows for easy adjustment of cleaning parameters.

- Температурын дэлгэц: Shows set and actual temperatures in Celsius.
- Temperature Buttons (SET/ACTUAL, Up/Down): Adjust the desired heating temperature.
- Цаг хэмжигч дэлгэц: Shows set and actual cleaning time in minutes and seconds.
- Timer Buttons (ON/OFF, Up/Down): Adjust the desired cleaning duration.
- Power Button (TEMP/TIME): Initiates or stops the heating/cleaning cycle.
Тохиргоо
- Баглаа задлах: Хэт авианы цэвэрлэгч болон бүх дагалдах хэрэгслийг савлагаанаас болгоомжтой авч хая. Ямар нэгэн гэмтэл байгаа эсэхийг шалгана уу.
- Байршил: Place the unit on a stable, level, and dry surface. Ensure adequate ventilation around the machine.
- Сав дүүргэх: Open the lid and fill the stainless steel tank with water or a suitable ultrasonic cleaning solution. Do not exceed the 'MAX' fill line. Ensure the fluid level is sufficient to cover the items to be cleaned.
- Эрчим хүчийг холбох: Цахилгааны утсыг газардуулсан цахилгааны залгуурт холбоно уу.
Ашиглалтын заавар
- Эд зүйлсийг бэлтгэх: Place the items to be cleaned into the mesh basket. Avoid overcrowding the basket to ensure effective cleaning.
- Сагс оруулах: Carefully lower the mesh basket containing the items into the cleaning tank. Ensure the items are fully submerged in the cleaning fluid.
- Температурыг тохируулах (заавал биш): Press the 'TEMP' button. Use the 'Up' and 'Down' arrows to set the desired cleaning temperature (range: 20-80°C or 68-176°F). The machine will begin heating.
- Цаг хэмжигчийг тохируулах: Press the 'TIME' button. Use the 'Up' and 'Down' arrows to set the desired cleaning duration (range: 1-30 minutes).
- Цэвэрлэж эхлэх: Press the 'ON/OFF' button (usually associated with the timer) to start the ultrasonic cleaning cycle. The display will show the remaining time.
- Хяналтын үйл явц: The machine will generate high-frequency sound waves, creating microscopic bubbles that implode (cavitation) to dislodge dirt and grime.
- Дуусгах: Once the timer counts down to zero, the machine will automatically stop.
- Зүйлүүдийг устгах: Carefully lift the mesh basket from the tank. Rinse the cleaned items with clean water and dry them thoroughly.

Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны хэт авианы цэвэрлэгчийн урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.
- Ус зайлуулах: After each use, especially if using cleaning solutions, unplug the unit and carefully drain the fluid from the tank.
- Танкийг цэвэрлэх: Wipe the inside of the stainless steel tank with a soft cloth. For stubborn residue, use a mild, non-abrasive cleaner. Rinse thoroughly.
- Гадна цэвэрлэгээ: Төхөөрөмжийн гадна талыг зараар арчинаamp даавуу. Зүлгүүрийн цэвэрлэгч хэрэглэж болохгүй, эсвэл төхөөрөмжийг усанд дүрж болохгүй.
- Хадгалах: Store the ultrasonic cleaner in a cool, dry place when not in use. Ensure the tank is empty and dry.
Алдааг олж засварлах
Хэрэв та CREWORKS хэт авианы цэвэрлэгчтэй холбоотой асуудалтай тулгарвал дараах нийтлэг асуудал болон шийдлүүдийг үзнэ үү.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Төхөөрөмж асахгүй байна | No power supply; damaged power cord; internal fuse tripped. | Check power connection and outlet. Inspect power cord for damage. If fuse is tripped, contact customer support. |
| No ultrasonic action (no sound/vibration) | Insufficient fluid; unit malfunction. | Ensure tank has sufficient fluid. If problem persists, contact customer support. |
| Цэвэрлэгээний үр дүн муу | Incorrect cleaning solution; insufficient cleaning time; items too dirty or overcrowded. | Use appropriate cleaning solution. Increase cleaning time. Clean heavily soiled items in multiple cycles or pre-clean. Do not overcrowd basket. |
| Халаалт ажиллахгүй байна | Халаалтын элементийн эвдрэл. | Тусламж авахын тулд хэрэглэгчийн дэмжлэгтэй холбоо барина уу. |
Үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Загварын дугаар | JX-010S |
| Бүтээгдэхүүний хэмжээс | 8.46 x 7.56 x 9.84 инч |
| Жин | 5.18 фунт |
| Танкны эзэлхүүн | 1.8 литр (0.5 галлон) |
| Хэт авианы хүч | 60 Вт |
| Халаалтын хүч | 100 Вт хүртэл |
| Хэт авианы давтамж | 40 кГц |
| Температурын хүрээ | 20-80°C (68-176°F) |
| Таймерын хүрээ | 1-30 минут |
| Танкны материал | 304 зэвэрдэггүй ган |
| Үйлдвэрлэгч | Багийн ажилчид |
Баталгаат болон дэмжлэг
CREWORKS products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your CREWORKS 1.8L Digital Ultrasonic Cleaning Machine, please contact CREWORKS customer service. Details can typically be found on the product packaging or the official CREWORKS webсайт.
Баталгаат заргад зориулж худалдан авалтаа нотлох баримтаа үлдээнэ үү.





