Wipcool Double Stage Vacuum Pump 2F3R User Manual

1. Танилцуулга

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Wipcool Double Stage Vacuum Pump Model 2F3R. Please read this manual thoroughly before operating the pump and retain it for future reference.

The Wipcool 2F3R vacuum pump is specifically designed for use with various refrigerants, including next-generation A2L refrigerants like R32 and R1234YF, as well as traditional refrigerants such as R410A and R22. Its design incorporates features for enhanced safety and performance in HVAC applications.

2. Аюулгүй ажиллагааны заавар

Тоног төхөөрөмжид гэмтэл учруулах, эвдрэл гарахаас урьдчилан сэргийлэхийн тулд дараах аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөөрэй.

• Цахилгааны аюулгүй байдал: Цахилгаан хангамж нь насосны эзлэхүүнтэй тохирч байгаа эсэхийг шалгаарайtage (230 Volts). Do not operate with damaged cords or plugs. Always disconnect power before servicing.
• Хөргөлтийн нийцтэй байдал: This pump is suitable for A2L refrigerants (R32, R1234YF) and other common refrigerants (R410A, R22). When working with flammable refrigerants (A2L), ensure proper ventilation and eliminate all potential ignition sources.
• Газрын тосны түвшин: Regularly check the oil level using the sight glass. Do not operate the pump without oil or when the oil level is low. Use only recommended vacuum pump oil.
• Агааржуулалт: Operate the pump in a well-ventilated area to prevent the accumulation of refrigerant vapors.
• Хувийн хамгаалах хэрэгсэл (PPE): Wear appropriate PPE, including safety glasses and gloves, when handling refrigerants and operating the pump.
• Харьцуулах: The pump weighs approximately 9.8 kg. Lift with care to avoid injury.
• Байгаль орчны нөхцөл: Avoid operating the pump in wet or excessively dusty environments.

3. Багцын агуулга

Савлахдаа бүх эд зүйлс байгаа бөгөөд гэмтэлгүй эсэхийг шалгана уу:

• Wipcool Double Stage Vacuum Pump 2F3R
• Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
• Цахилгааны утас
• Vacuum Pump Oil (may be included separately or pre-filled)

4. Бүтээгдэхүүний онцлог

The Wipcool 2F3R vacuum pump incorporates several advanced features for reliable performance:

• Non-Sparking Design: Suitable for use with A2L refrigerants (R32, R1234YF) and other refrigerants (R410A, R22).
• Сойзгүй моторын технологи: Offers a lighter design (over 25% lighter than similar products) and extended service life.
• Built-in Solenoid Valve: Prevents oil backflow into the system during power outages or shutdown.
• Overhead Vacuum Gauge: Provides a compact and easy-to-read display of vacuum levels.
• Integral Cylinder Structure: Enhances reliability and durability.
• Reinforced Aluminum Alloy Oil Tank: Designed for effective heat dissipation and resistance to chemical corrosion.
• Oversized Sight Glass: Allows for easy monitoring of oil color and level.

5. Тохиргоо

1. Савлах: Carefully remove the vacuum pump from its packaging. Inspect for any shipping damage.
2. Байршил: Place the pump on a stable, level surface in a well-ventilated area. Ensure adequate space around the pump for air circulation and heat dissipation.
3. Газрын тос дүүргэх:
   • Газрын тос дүүргэх тагийг ав.
   • Pour appropriate vacuum pump oil into the reservoir until the level is between the MIN and MAX marks on the sight glass. Do not overfill.
   • Тос дүүргэх тагийг найдвартай буцааж тавь.
4. Эрчим хүчний холболт: Connect the power cord to the pump and then to a grounded electrical outlet matching the specified voltage (230 В).
5. Анхны шалгалт: Before connecting to a system, briefly turn on the pump to ensure it operates smoothly and the oil circulates. Turn off immediately.

6. Ашиглалтын заавар

Follow these steps for proper operation of the vacuum pump:

1. Системд холбогдох: Connect the vacuum pump to the system requiring evacuation using appropriate vacuum hoses. Ensure all connections are tight to prevent leaks.
2. Нээлттэй системийн хавхлагууд: Open all valves on the manifold gauge set and the system to be evacuated.
3. Насосыг эхлүүлэх: Turn on the power switch of the vacuum pump. The pump will begin to draw a vacuum.
4. Тоос сорогч хянах: Observe the overhead vacuum gauge to monitor the vacuum level. Continue operation until the desired vacuum level is achieved, typically indicated by a stable reading.
5. Тусгаарлагч насос: Once the desired vacuum is reached, close the manifold gauge set valves to isolate the system from the pump.
6. Насосыг унтраах: Вакуум насосыг унтраа.
7. Салгах: Вакуум хоолойг насос болон системээс болгоомжтой салга.

7. Засвар үйлчилгээ

Regular maintenance ensures optimal performance and extends the life of your vacuum pump.

• Газрын тосны өөрчлөлт: Change the vacuum pump oil regularly, especially after each use with contaminated systems or when the oil appears discolored or cloudy.
  • Насосыг унтрааж, хөргөсөн эсэхийг шалгаарай.
  • Тос зайлуулах залгуурын доор тохиромжтой савыг байрлуул.
  • Remove the oil drain plug and the oil fill cap to allow oil to drain completely.
  • Replace the drain plug and refill with new, clean vacuum pump oil to the correct level.
• Цэвэрлэгээ: Keep the exterior of the pump clean and free of dust and debris. Ensure cooling fins are not obstructed.
• Хадгалах: When not in use, store the pump in a dry, clean environment. Ensure the oil level is correct before storage.

8. Алдаа засах

9. Техникийн үзүүлэлтүүд

10. Баталгаат хугацаа ба дэмжлэг

This Wipcool 2F3R Double Stage Vacuum Pump comes with a 1 жилийн баталгаат хугацаа худалдан авсан өдрөөс.

For warranty claims, technical support, or service inquiries, please contact your authorized Wipcool dealer or the manufacturer's customer service department. Please have your model number (2F3R) and proof of purchase available when contacting support.