1. Танилцуулга
Thank you for choosing the REPTITRIP Reptile Fogger. This device is designed to provide optimal humidity levels for amphibians, reptiles, and ecological rainforest terrariums. It features constant humidity control, a timer function, and a 4-liter capacity, ensuring a stable and healthy environment for your pets. Please read this manual thoroughly before operation to ensure proper use and maintenance.
Image 1: The REPTITRIP Reptile Fogger, showing the main unit, flexible hose, remote control, and external sensor.
2. Аюулгүй ажиллагааны заавар
- Always unplug the unit from the power outlet before filling, cleaning, or performing any maintenance.
- Үндсэн төхөөрөмжийг ус болон бусад шингэнд дүрж болохгүй.
- Цахилгааны утсыг гэмтээгээгүй, бүдрэх эсвэл татах боломжгүй газар байрлуулсан эсэхийг шалгаарай.
- Use only clean, distilled, or demineralized water to prevent mineral buildup and ensure optimal performance.
- Хүүхэд, тэжээвэр амьтдын гар хүрэхгүй газар хадгална уу.
- Манангийн гаралт, агаар оруулах нүхийг хааж болохгүй.
- Operate the unit on a stable, flat surface to prevent tipping.
- If the unit emits unusual sounds, smells, or smoke, unplug it immediately and discontinue use.
3. Багцын агуулга
Дараах зүйлсийн багцад байгаа эсэхийг шалгана уу.
- REPTITRIP Reptile Fogger Main Unit (4L water tank)
- Flexible Adjustable Hose
- Алсын удирдлага
- External Temperature & Humidity Sensor Probe
- Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
4. Бүтээгдэхүүний бүрэлдэхүүн хэсэг ба диаграмм
Familiarize yourself with the different parts of your REPTITRIP Reptile Fogger.
- Усны сав (4л багтаамжтай)
- Base Unit with Control Panel (Touch Screen)
- Mist Outlet Nozzle
- Уян хоолой холбогч
- Гадаад мэдрэгчийн порт
- Цахилгааны утас
- Алсын удирдлага
Image 2: The fogger's display highlighting the two primary operation modes: Time Setting and Humidity Control.
5. Тохиргоо
5.1 Савлах ба байрлуулах
- Бүх савлагааны материалыг зайлуул.
- Place the fogger on a flat, stable surface near the terrarium. Ensure there is enough space around the unit for proper ventilation.
5.2 Усны савыг дүүргэх
- Lift the water tank from the base unit.
- Савны ёроолд байгаа тагийг задлах хэрэгтэй.
- Fill the tank with clean, distilled, or demineralized water. Do not exceed the maximum fill line.
- Тагийг нь сайтар шургуулна.
- Дүүргэгдсэн усны савыг зөв суулгаж, суурь нэгж дээр буцааж тавь.
5.3 Connecting the Hose and Sensor
- Connect one end of the flexible hose to the mist outlet nozzle on the top of the fogger.
- Route the other end of the hose into your terrarium, positioning the mist outlet where desired.
- Plug the external temperature and humidity sensor probe into its designated port on the base unit.
- Place the sensor inside the terrarium, away from the direct mist path, to accurately measure ambient conditions.
5.4 Эрчим хүчний холболт
- Plug the power cord into a standard electrical outlet. The unit will beep, and the display will illuminate.
6. Үйл ажиллагаа
6.1 Хяналтын самбар ба алсын удирдлага
The fogger can be operated via the touch screen control panel on the base unit or the included remote control. Both offer similar functionalities.
- SET/ON/OFF Button: Powers the unit on/off and enters setting modes.
- OK товчлуур: Confirms selections in setting modes.
- '+' ба '-' товчлуурууд: Adjust values (time, humidity, mist level) and navigate menus.
6.2 Үйлдлийн горимууд
The REPTITRIP Fogger offers two main operating modes: Хугацааны чиг үүрэг болон Чийгийн горим. These modes operate independently.
Image 3: The fogger's versatility for various applications, including terrarium humidification and indoor plant care.
6.2.1 Цагийн функц
This mode allows you to schedule humidification cycles based on specific intervals and durations.
- дээр дарна уу SET button to enter the timing settings.
- -г ашиглана уу '+' болон '-' тохируулах товчлуурууд Давтамж (interval between humidification cycles, from 1 hour to 7 days). Press OK баталгаажуулах.
- -г тохируулах Үргэлжлэх хугацаа (how long the fogger will mist during each cycle, from 10 seconds to 1 hour). Press OK баталгаажуулах.
- The display will show the next humidification time and current humidity.
6.2.2 Humidity Mode (Constant Humidity)
This mode maintains a desired humidity range by automatically turning the fogger on and off based on sensor readings.
- дээр дарна уу SET button until the humidity setting appears.
- -г ашиглана уу '+' болон '-' тохируулах товчлуурууд Хамгийн бага чийгшил хувьtagд. Дарна уу OK баталгаажуулах.
- -г тохируулах Хамгийн их чийгшил хувьtagд. Дарна уу OK баталгаажуулах.
- The fogger will now automatically activate when humidity drops below the minimum and stop when it reaches the maximum. The current humidity value will be displayed.
Image 4: A graphical representation demonstrating the REPTITRIP fogger's ability to maintain a consistent humidity range.
6.3 Fog Adjustment
The fogger offers three levels of mist output, allowing you to control the rate of humidification.
- In either Timing or Humidity mode, use the '+' болон '-' buttons on the control panel or remote to cycle through the three mist levels.
- Mist levels correspond to approximately 100ml/hr, 200ml/hr, and 300ml/hr water consumption.
Image 5: Visual representation of the three adjustable mist output levels.
6.4 Автомат унтрах
The REPTITRIP Fogger is equipped with an automatic shut-off feature. When the water level in the tank is too low, an icon will appear on the display, and the atomizer will automatically power down to prevent damage and ensure safety.
7. Засвар үйлчилгээ
Regular cleaning is essential for optimal performance and longevity of your fogger.
7.1 Cleaning the Water Tank and Base Unit
- Төхөөрөмжийг залгуураас салгаад усны савыг ав.
- Empty any remaining water from the tank and the base unit.
- Wipe the inside of the water tank and the base unit (especially the transducer/atomizer disc) with a soft cloth.
- For mineral buildup, use a solution of white vinegar and water (1:1 ratio). Let it soak for 15-20 minutes, then gently scrub with a soft brush and rinse thoroughly.
- Дахин угсрахаасаа өмнө бүх эд анги бүрэн хатсан эсэхийг шалгаарай.
7.2 Cleaning the Hose and Sensor
- Periodically check the flexible hose for any condensation or debris. Clean with a mild soap and water solution if necessary, and rinse thoroughly.
- Wipe the external sensor probe with a dry, soft cloth. Do not use harsh chemicals or immerse the sensor in water.
8. Алдаа засах
If you encounter issues with your REPTITRIP Fogger, please refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Манан үүсээгүй байна. | Low water level; Unit not powered on; Atomizer disc dirty or damaged. | Refill water tank; Ensure unit is plugged in and powered on; Clean atomizer disc (refer to Maintenance). |
| Display is flashing or unit is beeping. | Low water warning; Sensor error; Internal malfunction. | Check water level and refill if necessary. Ensure sensor is properly connected. If problem persists after refilling and checking sensor, unplug and plug back in. If still flashing/beeping, contact customer support. |
| Humidity levels are not increasing sufficiently. | Mist output too low; Terrarium too large/leaky; Sensor placement. | Increase mist output level; Check terrarium for excessive ventilation; Reposition sensor away from direct mist. |
| Төхөөрөмжийн эргэн тойронд цагаан тоос. | Хатуу ус ашиглах. | Use only distilled or demineralized water. Clean the unit regularly to remove mineral buildup. |
9. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | РЕПТИТРИП |
| Загварын дугаар | RP-168 |
| Өнгө | Хар |
| Бүтээгдэхүүний хэмжээс | 18.54 x 18.54 x 26.67 см |
| Зүйлийн жин | 1.47 кг |
| Хүчин чадал | 4 литр (1.06 галлон) |
| Материал | Хуванцар |
| Ажиллах цаг | Up to 20 hours (on lowest mist setting) |
| Онцлог шинж чанарууд | Auto Shut Off, Constant Humidity, Timer Function, Remote Control, Touch Screen, Temperature & Humidity Display |
| Манангийн гаралтын түвшин | 3 (approx. 100/200/300 ml/hr) |
10. Баталгаат хугацаа ба дэмжлэг
This product typically comes with a limited warranty. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or REPTITRIP customer service through the platform where the product was purchased.
Буцаах бодлого: The standard return policy for this product is 30 days from the date of purchase for refund or replacement.
