Sena 10S мотоциклийн Bluetooth чихэвчний холбооны системийн хэрэглэгчийн гарын авлага

1. Бүтээгдэхүүн дууссанview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Гол онцлогууд:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Зураг 1.1: Урд view of the Sena 10S Motorcycle Bluetooth Headset.

2. Багцын агуулга

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Чанга яригч
• Boom микрофон
• Утастай микрофон
• Cl холбохamp Иж бүрдэл
• USB цахилгаан ба мэдээллийн кабель
• Аудио кабель
• Чанга яригчдад зориулсан Velcro дэвсгэр
• Микрофон хөвөн

Figure 2.1: All components included in the Sena 10S package.

3. Тохиргоо ба суурилуулалт

3.1 Төхөөрөмжийг цэнэглэх

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Зураг 3.1: Хажуу тал view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. cl-ийн ар талд байгаа боолтыг сулланаamp нэгж.
2. cl-ийг гулсуулна ууamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Боолтыг чангалж, бэхэлгээг бэхлэнэ үүamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Ашиглалтын заавар

4.1 Асаах/унтраах

• Асаах: Press and hold the Phone Button and the Jog Dial for 1 second.
• Унтраах: Tap the Phone Button and the Jog Dial simultaneously.

4.2 Дууны хяналт

Дууг нэмэгдүүлэхийн тулд жолооны товчлуурыг цагийн зүүний дагуу, багасгахын тулд цагийн зүүний эсрэг эргүүлнэ үү.

4.3 Bluetooth Pairing (Smartphone)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Дотоод холбооны холбоо

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Хөгжим тоглуулах/түр зогсоох: Jog Dial дээр дарж 1 секундын турш барина уу.
• Дуудлагад хариулах/дуусах: Утасны товчийг дарна уу.
• Дуут залгах: Утасны товчлуурыг 3 секундын турш барина уу.

5. Засвар үйлчилгээ, арчилгаа

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Keep the device dry. Moisture can damage internal circuits.
• Төхөөрөмжийг цэвэрлэхийн тулд хүчтэй химийн бодис, цэвэрлэгээний уусгагч, хүчтэй угаалгын нунтаг хэрэглэж болохгүй.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Төхөөрөмжийг ашиглаагүй үед сэрүүн, хуурай газар хадгална.
• Зайны эрүүл мэндийг хадгалахын тулд ашиглаагүй байсан ч батерейг тогтмол цэнэглээрэй.

6. Алдаа засах

If you encounter issues with your Sena 10S, try the following steps:

• Эрчим хүчгүй: Батерей цэнэглэгдсэн эсэхийг шалгана уу. Цахилгаан тэжээлийн эх үүсвэрт холбогдож, цэнэглэж байгаа индикатор асаж байгаа эсэхийг шалгана уу.
• Дуу байхгүй/Бага хэмжээ: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Intercom Not Connecting: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Bluetooth салгах: Ensure your paired device is within range. Try re-pairing the device.
• Төхөөрөмжийг дахин тохируулах: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Техникийн үзүүлэлтүүд

8. Бүтээгдэхүүний албан ёсны видео

9. Баталгаат хугацаа ба дэмжлэг

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.