PowMr 12V 100Ah LiFePO4 Lithium Battery User Manual

1. Танилцуулга

This manual provides essential information for the safe and efficient use of your PowMr 12V 100Ah LiFePO4 Lithium Battery. This battery is designed for various applications including solar systems, RVs, boats, and off-grid setups, offering a reliable and long-lasting power solution. Please read this manual thoroughly before installation and operation.

2. Аюулгүй байдлын мэдээлэл

Always prioritize safety when handling batteries. Failure to follow these instructions may result in serious injury, property damage, or damage to the battery.

• Зайны терминалуудад богино холболт үүсгэж болохгүй.
• Зайг гал болон хэт халуунд бүү гарга.
• Do not immerse the battery in water or other liquids. The battery is IP65 waterproof, but prolonged immersion is not recommended.
• Зайг задлах, бутлах, цоолж болохгүй.
• Зөвхөн тохирох цэнэглэгч болон цэнэглэх аргыг ашиглаарай.
• Цэнэглэх болон цэнэггүй болгох үед агааржуулалтыг зөв хийх хэрэгтэй.
• Батерейг хүүхэд, тэжээвэр амьтнаас хол байлга.
• Wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling batteries.
• This battery is not intended for use as a starter battery.

Image: A special reminder icon, emphasizing important safety notes.

3. Багцын агуулга

Сав баглаа боодлыг онгойлгосны дараа бүх эд ангиуд байгаа бөгөөд гэмтээгүй эсэхийг шалгана уу:

• 1 x PowMr 12V 100Ah LiFePO4 Lithium Battery
• 2 x M8 Terminal Bolts
• 2 х угаагч

Image: The PowMr 12V 100Ah LiFePO4 battery with M8 terminal bolts, illustrating the included hardware.

4. Бүтээгдэхүүний онцлог

• Үйлчилгээний урт хугацаа: Offers 4000+ cycles with 100% Depth of Discharge (DoD), providing a service life of up to 10 years.
• Хөнгөн загвар: Weighs approximately 11.5kg, significantly lighter than traditional lead-acid batteries, enhancing portability.
• Суурилуулсан 100A BMS: Integrated Battery Management System protects against overcharge, overdischarge, overcurrent, and short circuits.
• Өргөтгөх хүчин чадал: Supports series and parallel connections for increased capacity and voltage (up to 4S4P for max 51.2V and 400Ah).
• Өргөн хэрэглээний програм: Suitable for RVs, camping, marine, solar systems, home energy storage, and off-grid applications.
• IP65 Усны хамгаалалт: Provides protection against dust and water splashes, suitable for indoor and outdoor installations.

Image: A diagram illustrating the various protections offered by the built-in 100A BMS, including overcharge, overdischarge, overcurrent, short circuit, cell voltage, and high-temperature protection.

Зураг: Нэмэлт зүйлийг онцолсон харааны харьцуулалтtages of the PowMr LiFePO4 battery over traditional lead-acid batteries in terms of weight, cycle life, service life, and depth of discharge.

5. Тохиргоо ба суурилуулалт

5.1. Анхны үзлэг

Before installation, inspect the battery for any physical damage. Ensure the terminals are clean and free of corrosion.

5.2. Зайг холбох

Connect the battery to your system using appropriate cables and connectors. Ensure correct polarity: positive (+) to positive and negative (-) to negative. Use the provided M8 terminal bolts to secure connections tightly.

Image: A diagram showing how to connect batteries, indicating positive and negative terminals.

5.3. Цуваа ба зэрэгцээ холболтууд

The PowMr 12V 100Ah LiFePO4 battery supports both series and parallel connections to achieve higher voltage or capacity. It can be connected in series up to 4 units (4S) and in parallel up to 4 units (4P), allowing for configurations such as 4S4P for a maximum of 51.2V and 400Ah.

• Зэрэгцээ холболт: Connect positive terminals together and negative terminals together to increase capacity (Ah) while maintaining the same voltage (V).
• Цуврал холболт: Connect the positive terminal of one battery to the negative terminal of the next battery to increase voltage (V) ижил хүчин чадлыг хадгалахын зэрэгцээ (Ah).
• Always ensure all batteries in a series or parallel bank are of the same type, capacity, and state of charge before connecting.

Image: A diagram illustrating various expandable capacity configurations, including a 4S4P setup for maximum energy storage.

Image: A schematic showing the PowMr LiFePO4 battery integrated into a solar power system, connecting solar panels, an MPPT controller, and an inverter to power various household loads.

6. Ашиглалтын заавар

6.1. Цэнэглэх

The battery supports a 50A charging current. Use a compatible LiFePO4 charger or a solar charge controller (MPPT recommended) designed for lithium iron phosphate batteries. Ensure the charging voltage нь санал болгож буй хязгаарт байна (ихэвчлэн 14.2V - 14.6V).

Image: A split image showing the battery being charged by a dedicated battery charger on one side and a solar panel setup with an MPPT controller charging the battery on the other.

6.2. Цэнэглэх

The battery supports a 100A continuous discharge current. The built-in BMS will protect the battery from over-discharge. Ensure your load does not exceed the maximum continuous discharge current to prevent the BMS from triggering protection mode.

6.3. Ашиглалтын температур

Observe the recommended operating temperature ranges:

• Цэнэглэж байна: 0°C - 50°C (32°F - 122°F)
• Цэнэглэж байна: -20°C - 60°C (-4°F - 140°F)
• Хадгалах: -10°C - 50°C (14°F - 122°F)

Image: A thermometer graphic indicating the safe operating temperature range for the battery.

7. Засвар үйлчилгээ

• Тогтмол үзлэг: Periodically check the battery terminals for cleanliness and tightness. Ensure there are no signs of damage or swelling.
• Цэвэрлэгээ: Батерейг хуурай даавуугаар арчина ууasing. Уусгагч эсвэл зүлгүүрийн цэвэрлэгч хэрэглэж болохгүй.
• Хадгалах: If storing the battery for an extended period, ensure it is charged to approximately 50-70% State of Charge (SoC) and stored in a cool, dry place within the recommended storage temperature range. Recharge every 3-6 months to prevent deep discharge.

8. Алдаа засах

If you encounter issues with your PowMr LiFePO4 battery, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact PowMr customer support.

9. Техникийн үзүүлэлтүүд

Image: The PowMr 12.8V 100Ah LiFePO4 battery displayed alongside a table summarizing its key technical specifications.

10. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or service inquiries, please refer to the official PowMr webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.

PowMr Official Webсайт: www.powmr.com