Ving 24-inch Automatic DTF Powder Shaker and Dryer Instruction Manual

1. Танилцуулга

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of the Ving 24-inch Automatic DTF Powder Shaker and Dryer. This unit is designed to automate the direct-to-film (DTF) transfer printing process by evenly spreading and melting adhesive powder onto printed images, streamlining production for T-shirt and other textile applications.

Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury. Keep this manual for future reference.

2. Аюулгүй байдлын мэдээлэл

Дараах аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөөрэй.

• Машиныг тогтвортой, тэгш гадаргуу дээр байрлуулсан эсэхийг шалгаарай.
• Машиныг зөв хэмжээтэй газардуулсан цахилгаан залгуурт холбоноtage.
• Ашиглалтын явцад гар, сул хувцасыг хөдөлгөөнт хэсгүүдээс хол байлга.
• d-д машиныг ажиллуулж болохгүйamp эсвэл нойтон нөхцөл.
• Turn off and unplug the machine before performing any maintenance or cleaning.
• Use appropriate personal protective equipment (PPE) such as gloves and masks when handling DTF powder.
• Ensure adequate ventilation in the work area to dissipate fumes from the drying process.

3. Бүтээгдэхүүн дууссанview

The Ving 24-inch Automatic DTF Powder Shaker and Dryer integrates several functions to automate the DTF transfer process:

• Vacuum Absorption Conveying Platform: Secures the printing material to prevent bulging and ensure consistent powder application.
• Automatic Powder Dispenser: Evenly spreads adhesive powder onto the printed film.
• Paddle System: Removes excess powder from the film.
• Infrared Drying and Heating Tunnel: Features 4 bulbs for efficient melting and curing of the adhesive powder, enhancing color reproduction.
• Warming Inlet Platform: Prepares the film for optimal powder adhesion.
• Touch Screen Display Controller: Provides a user-friendly interface for machine control.
• Roll-up Mechanism: Collects the finished film.

Зураг 3.1: Урд view of the Ving 24-inch Automatic DTF Powder Shaker and Dryer, showing the overall machine structure.

Зураг 3.2: Хажуу тал view of the machine, highlighting the integrated touch screen control panel.

Figure 3.3: The DTF Shaker and Dryer integrated into a typical printing workshop environment.

4. Тохиргоо

1. Савлах: Carefully remove the machine from its packaging. Inspect for any shipping damage. Report any damage to the carrier immediately.
2. Байршил: Position the machine on a sturdy, level surface capable of supporting its weight. Ensure there is sufficient space around the machine for operation, maintenance, and ventilation.
3. Эрчим хүчний холболт: Connect the power cord to the machine and then to a grounded electrical outlet that meets the specified voltage шаардлага.
4. Powder Loading: Open the powder dispenser compartment and carefully pour the DTF adhesive powder into the designated reservoir. Ensure the powder is dry and free of clumps.
5. Кино ачаалж байна: Load the DTF film roll onto the input spindle, ensuring it feeds smoothly onto the vacuum absorption conveying platform.
6. Анхны асаалт: Turn on the main power switch. The touch screen display should illuminate.

5. Ашиглалтын заавар

Follow these steps for the DTF transfer printing process using the Ving Automatic DTF Powder Shaker and Dryer:

1. Дизайнаа бэлтгэ: Create or select your design using appropriate graphic software.
2. Print onto DTF Film: Print your design onto the DTF film using a compatible DTF printer. Ensure the print is wet when it enters the shaker unit.
3. Automatic Powder Shaking: As the wet printed film enters the shaker unit, the automatic powder dispenser will apply an even layer of adhesive powder. The paddle system will then remove excess powder.
4. Baking/Curing: The film with the applied powder will then pass through the infrared drying and heating tunnel. The heat will melt and cure the adhesive powder onto the ink.
5. Heat Press Application: Once the film exits the dryer and cools, it is ready for heat pressing onto your desired garment or substrate.
6. Дуусгах: Peel the transfer film from the garment after heat pressing according to the film manufacturer's instructions.

Figure 5.1: Visual representation of the DTF printing workflow, from design creation to final product.

Зураг 5.2: Дотоод view of the drying tunnel, illustrating the infrared heating elements and the conveyor belt system.

Зураг 5.3: View of the powder collection and distribution system within the shaker unit.

6. Засвар үйлчилгээ

Regular maintenance ensures optimal performance and longevity of your DTF Powder Shaker and Dryer.

• Өдөр тутмын цэвэрлэгээ: After each use, clean any residual powder from the conveying platform, powder dispenser, and paddle system. Use a soft, dry cloth or brush.
• Powder Management: DTF powder shakers typically do not have an automatic powder recycling function. Regularly inspect and remove any excess powder to prevent moisture absorption, which can lead to clumping and poor application. Store unused powder in a dry, sealed container.
• Conveyor Belt Inspection: Periodically check the conveyor belt for wear, tears, or misalignment. Clean the belt to remove any adhesive residue.
• Халаалтын элементийн шалгалт: Ensure the infrared heating bulbs are clean and functioning correctly. Replace any burnt-out bulbs as needed.
• Ерөнхий үзлэг: Regularly inspect all electrical connections and moving parts for any signs of wear or damage.

Чухал тэмдэглэл:

This DTF powder shaker model does not feature an automatic powder recycling function. Manual removal and proper storage of excess powder are essential to prevent moisture absorption and maintain powder quality.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

• Загвар: B0CFQNQ5FN
• Брэнд: Ving
• Машины төрөл: Automatic DTF Powder Shaker and Dryer
• Maximum Film Width: Approximately 24 inches (based on product title)
• Хатаах арга: Infrared Heating (4 bulbs)
• Хяналтын интерфейс: Мэдрэгчтэй дэлгэц
• Conveying System: Vacuum Absorption Platform
• Applicable Mediums: Nylon, Chemical Fiber, Cotton, Leather, Swimsuit, Diving Suit, PVC, EVA, etc.
• Үйлдвэрлэгч: Sign-in-China
• Эхний боломжтой огноо: 15 оны наймдугаар сарын 2023

Зураг 8.1: Жишээ ньamples of various materials and finished products that can be customized using DTF transfer printing, including canvas bags, hats, pillows, T-shirts, hoodies, pants, socks, and masks.

9. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your vendor. Please have your model number (B0CFQNQ5FN) and date of purchase ready when contacting support.