DIGITUS Дулаан дамжуулагч шошго хэвлэгч DA-81021 300 DPI хэрэглэгчийн гарын авлага

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of your DIGITUS Thermal Transfer Label Printer DA-81021. Please read this manual thoroughly before using the printer to ensure proper function and longevity of the device. Keep this manual for future reference.

2. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

• 1х шошго хэвлэгч
• 1x тэжээлийн адаптер
• 1x USB кабель
• 1x Test Label Paper
• 2x Label Roll Holders
• 1x Cardboard Case (packaging)
• 1x Ribbon
• 1x Ribbon Recycle Roll
• 2x Ribbon Screws
• 1x хурдан суулгах гарын авлага (QIG)

3. Бүтээгдэхүүн дууссанview

Familiarize yourself with the printer's components and interfaces.

Зураг: Урд view of the DIGITUS Thermal Transfer Label Printer DA-81021.

Image: Diagram illustrating the feed button, status indicator, ON/OFF switch, power supply input, microSD card slot, RJ45 Ethernet port, RS-232 serial port, and USB-B 2.0 port on the DIGITUS DA-81021 label printer.

Зураг: Ар талд view of the DIGITUS DA-81021 label printer, highlighting the various connectivity ports including USB, RS-232, Ethernet, and microSD card slot.

4. Тохиргоо

4.1. Принтерийг холбох

1. Connect the power adapter to the printer's power input and then to a power outlet.
2. Connect the printer to your computer using the provided USB cable, or via an RS-232 serial cable, or an Ethernet cable for network connectivity.
3. Turn on the printer using the ON/OFF switch located on the side of the device.

4.2. Loading Labels and Ribbon

The printer supports both direct thermal and thermal transfer printing methods. For thermal transfer printing, a ribbon is required.

Image: The DIGITUS DA-81021 label printer with its top cover open, illustrating the correct placement of a label roll within the housing.

Зураг: Дотоод view of the DIGITUS DA-81021 label printer, showing the mechanism for loading both the thermal ribbon and label media.

1. Принтерийн дээд тагийг нээнэ үү.
2. Insert the label roll onto the label roll holders and place it into the designated slot. Ensure the labels feed smoothly.
3. If using thermal transfer, install the ribbon onto the ribbon supply spindle and thread it through the print mechanism as indicated in the diagram. Secure the ribbon with the ribbon screws.
4. Дээд талын тагийг хаа.

4.3. Драйвер суулгах

Install the appropriate printer drivers for your operating system (Windows, Mac, Linux). Drivers are typically provided on a CD or can be downloaded from the Digitus support webсайт. Суулгахын тулд дэлгэцэн дээрх зааврыг дагана уу.

5. Принтерийг ажиллуулах

5.1. Үндсэн хэвлэх

Once the printer is connected and drivers are installed, you can print labels from your application. Ensure the label size and type settings in your software match the loaded media.

Image: The DIGITUS DA-81021 label printer actively printing a label on a desk, demonstrating its use in a typical office environment.

5.2. Printer Controls and Indicators

• Тэжээлийн товчлуур: Press to advance a single label or a set length of media.
• Статусын үзүүлэлт: Provides visual feedback on the printer's status (e.g., ready, error, out of media). Refer to the QIG for specific light patterns.
• ON/OFF унтраалга: Controls the power to the printer.

5.3. Supported Media and Printing Features

• Шошгоны төрлүүд: Continuous, gap, black mark, fan-fold, and perforated labels.
• Хэвлэх нягтрал: 300 DPI for clear and sharp prints.
• Хэвлэх хурд: Up to 101.6 mm/s (4 inches/second).
• Хэвлэх өргөн: Adjustable between 25.4 mm and 118 mm (1 to 4.25 inches).
• Ribbon Capacity: Supports 300-meter ribbons on a 25.4 mm (1 inch) core.
• Эмуляци: TSPL, EPL, ZPL, and DPL for broad compatibility with various label printing software.
• Бар кодын дэмжлэг: Comprehensive support for 1D (e.g., Code 39, Code 128, EAN, UPC) and 2D (e.g., PDF-417, QR code, DataMatrix) barcodes.

6. Засвар үйлчилгээ

6.1. Хэвлэх толгойг цэвэрлэх

Regular cleaning of the print head is crucial for maintaining print quality and extending the printer's lifespan. Use a lint-free cloth moistened with isopropyl alcohol. Ensure the printer is turned off and cooled down before cleaning.

Image: Detailed internal view of the DIGITUS DA-81021 label printer, highlighting the print head, black ribbon, gap sensor, and black mark sensor.

6.2. Шошго болон туузыг солих

Replace label rolls and ribbons as they run out. Follow the loading instructions in Section 4.2. Always use compatible labels and ribbons to prevent damage to the printer and ensure optimal print quality.

7. Алдаа засах

This section addresses common issues you might encounter with your label printer.

• Хэвлэгч хариу өгөхгүй байна:
  • Цахилгааны холболтыг шалгаад принтер асаалттай байгаа эсэхийг шалгана уу.
  • Verify USB/Ethernet/Serial cable connections.
  • Принтер болон компьютерээ дахин эхлүүлнэ үү.
  • Драйверуудыг зөв суулгасан эсэхийг шалгаарай.
• Хэвлэлийн чанар муу:
  • Clean the print head (refer to Section 6.1).
  • Ensure the correct label and ribbon type are used for thermal transfer printing.
  • Adjust print density settings in your printer preferences.
  • Check if the ribbon or labels are properly loaded and not creased.
• Labels not feeding correctly:
  • Ensure labels are loaded correctly and not jammed.
  • Шошгоны замд ямар нэгэн саад бэрхшээл байгаа эсэхийг шалгана уу.
  • Verify label type settings in your software.

Асуудал хэвээр байвал хэрэглэгчийн дэмжлэгтэй холбогдоно уу.

8. Техникийн үзүүлэлтүүд

Detailed technical specifications for the DIGITUS Thermal Transfer Label Printer DA-81021.

9. Баталгаат хугацаа ба дэмжлэг

ЕХ-ны сэлбэг хэрэгслийн бэлэн байдал: Худалдан авсан өдрөөс хойш 1 жил.

For technical support, driver downloads, or further assistance, please visit the official Digitus website or contact your local dealer. You can also find more information on the Digitus Brand Store.