Bimar HP129 Цахилгаан баганатай халаагуурын хэрэглэгчийн гарын авлага

1. Танилцуулга

Thank you for choosing the Bimar HP129 Electric Column Heater. This manual provides essential information for the safe and efficient operation of your appliance. Please read it thoroughly before first use and retain it for future reference. This product is designed for heating indoor domestic environments up to 20 m² and is suitable for properly insulated spaces as a supplementary energy-saving heater.

2. Аюулгүй ажиллагааны заавар

Осол гэмтэл, гэмтлээс урьдчилан сэргийлэхийн тулд дараах аюулгүй байдлын арга хэмжээг үргэлж дагаж мөрдөөрэй.

• Ensure the heater is placed on a stable, level surface to prevent tipping. The appliance includes an anti-tip switch for safety.
• Do not cover the heater or obstruct its air inlets and outlets. Overheating can occur, activating the integrated safety device.
• Keep the heater away from water, moisture, and flammable materials such as curtains, furniture, or paper.
• Do not use the heater in dusty environments or where extremely volatile materials are present.
• Халаагуурыг цэвэрлэх эсвэл зөөхөөс өмнө үргэлж залгуураас нь салга.
• Халаагчийн нүхэнд ямар нэгэн зүйл хийж болохгүй.
• Энэ төхөөрөмжийг бие бялдар, мэдрэхүйн болон сэтгэцийн хомсдолтой, эсвэл туршлага, мэдлэг дутмаг хүмүүс (хүүхдүүдийг оролцуулан) ашиглахад зориулагдаагүй бөгөөд хэрэв тэдэнд аюулгүй байдлыг нь хариуцдаг хүнээс зааварчилгаа өгөөгүй бол төхөөрөмжийг ашиглах талаар зааварчилгаа аваагүй болно. .
• Хүүхдийг төхөөрөмжөөр тоглуулахгүйн тулд тэднийг хянах хэрэгтэй.

3. Бүтээгдэхүүн дууссанview

The Bimar HP129 is an electric column heater featuring PTC ceramic resistance for efficient heating. It includes an aluminum propeller for effective and quiet ventilation, and a plastic body with an integrated handle for easy transport.

Хяналтууд

The heater features two main control dials located on the top panel:

• Power Selector Dial: Controls the operating mode (Off, Fan only, 1000W warm air, 2000W very hot air with oscillation).
• Термостатын залгах: Хүссэн өрөөний температурыг тохируулна.

4. Тохиргоо

Before initial use, follow these steps:

1. Unpack the heater and place it on a firm, level, and heat-resistant surface.
2. Ensure there is adequate clearance around the heater (at least 50 cm from walls, furniture, and curtains).
3. Plug the heater into a suitable electrical outlet (220-240V ~ 50Hz).
4. Анхны хэрэглээ: Upon first use, operate the heater for at least 10-15 minutes to eliminate the 'new smell'. During this period, ensure the room is well-ventilated.

5. Ашиглалтын заавар

Эрчим хүчний тохиргоо

Use the Power Selector Dial to choose your desired operating mode:

• Унтраах (0): Халаагчийг унтраадаг.
• Fan Only (Fan icon): Activates the fan without heating, providing air circulation.
• Warm Air (1000W): 1000Вт дулааны эрчим хүчээр хангана.
• Very Hot Air (2000W) with Oscillation: Provides 2000W of heating power and activates the automatic right/left oscillation function for wider heat distribution.

Термостатын хяналт

The thermostat dial allows you to set the desired room temperature. Turn the dial clockwise to increase the temperature setting and counter-clockwise to decrease it. The heater's PTC technology automatically adjusts power consumption based on the ambient temperature, providing maximum power at low temperatures and reducing it as the room warms up.

The room thermostat regulates the device's operation: it runs continuously until the set temperature is reached, then cycles on and off at intervals to maintain the temperature constant. An indicator light on the control panel illuminates when the heater is actively heating and turns off when the set temperature is reached.

6. Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь таны халаагуурын хамгийн оновчтой ажиллагаа, урт хугацааны ашиглалтыг баталгаажуулдаг.

Цэвэрлэгээ

1. Цэвэрлэхийн өмнө халаагуурыг үргэлж цахилгааны залгуураас салгаж, бүрэн хөргөнө.
2. Гадна талын гадаргууг зөөлөн арчиж, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic housing.
3. Халаагчийг ус болон бусад шингэнд дүрж болохгүй.
4. Periodically clean the air intake and outlet grilles with a soft brush or vacuum cleaner to remove dust and debris.

Хадгалах

Ашиглаагүй үед халаагуурыг сэрүүн, хуурай газар, болж өгвөл анхны савлагаанд нь, нарны шууд тусгал болон чийгнээс хол хадгална уу.

7. Алдаа засах

If you encounter issues with your Bimar HP129 heater, refer to the following common problems and solutions:

• Халаагч асахгүй байна:
  • Цахилгааны утсыг ажиллаж байгаа цахилгааны залгуурт найдвартай залгасан эсэхийг шалгана уу.
  • Ensure the Power Selector Dial is not set to 'Off' (0).
  • Verify that the anti-tip switch on the base of the heater is engaged (heater is on a flat surface).
• Heater stops operating unexpectedly:
  • The integrated safety device may have activated due to overheating. Unplug the heater, allow it to cool down for at least 30 minutes, and check for any obstructions blocking the air inlets or outlets.
  • If the heater stops after reaching the set temperature and does not restart automatically, try turning it off, waiting approximately 5 minutes, and then turning it back on. If the issue persists, contact customer support.
• Халаалт хангалтгүй байна:
  • Ensure the thermostat dial is set to a higher temperature than the current room temperature.
  • Check that the Power Selector Dial is set to 1000W or 2000W, not just 'Fan Only'.
  • Confirm the room size is within the recommended 20 m² for effective heating.

For problems not listed here, or if solutions do not resolve the issue, please contact Bimar customer support.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or spare parts availability, please refer to the documentation provided with your purchase or contact Bimar customer service directly. Contact details can typically be found on the manufacturer's official webсайт эсвэл бүтээгдэхүүний сав баглаа боодол дээр.