Lian-Li UNI FAN AL120 ARGB Fan Instruction Manual

Танилцуулга

The Lian-Li UNI FAN AL120 is a 120mm Addressable RGB (ARGB) fan designed to provide efficient cooling and customizable lighting for your PC. This fan features an innovative daisy-chain design, significantly simplifying installation and cable management by allowing multiple fans to connect with fewer cables. It integrates aesthetic elements such as an aluminum medallion and LEDs on both sides, with customized lighting effects on the fan blades and inner frame, all controllable via the L-Connect software.

Image: The Lian-Li UNI FAN AL120 ARGB Fan showcasing its vibrant, customizable lighting.

Тохиргоо

Follow these steps for proper installation of your UNI FAN AL120:

1. Бүрэлдэхүүн хэсгүүдийг задлах: Carefully remove the fan and all accessories (such as mounting screws and cables) from the packaging.
2. Daisy-Chain Connection: The UNI FAN AL120 features an interlocking mechanism. Align and slide the fans together to create a cluster. This design allows multiple fans to share a single power and ARGB cable connection, simplifying cable management.
3. Суурилуулалт: Secure the fan(s) to your PC case or radiator using the provided screws. Ensure the airflow direction is appropriate for your cooling configuration (intake or exhaust).
4. Кабелийн холболт: Connect the daisy-chained fan cluster to the UNI HUB controller (if included with a multi-pack, or purchased separately) or directly to your motherboard's ARGB and fan headers if compatible. Only two cables are typically required for a cluster of fans.
5. Програм хангамж суурилуулах: Download and install the latest L-Connect software from the official Lian-Li website. This software is essential for controlling ARGB lighting effects and fan speeds.

Image: Contents of the Lian-Li UNI FAN AL120 package, showing the fan, cables, and accessories for installation.

Ажиллаж байна

Once installed, the UNI FAN AL120 is ready for operation. Control its features using the L-Connect software:

• Асаах: Start your computer. The fans should begin spinning and illuminate with default ARGB effects.
• L-Connect Software: Launch the L-Connect application. Through this interface, you can:
  • Adjust fan speed (RPM) to balance cooling performance and noise levels. The fan operates at a maximum rotational speed of 1900 RPM, with a noise level of approximately 30 Decibels.
  • Select from multiple pre-set lighting effects or customize individual LED colors and patterns on the fan blades and inner edge.
  • Synchronize lighting with other compatible ARGB components in your system.
• Агаарын урсгал: The fan provides an airflow capacity of 64.5 Cubic Feet Per Minute (CFM), ensuring effective air movement within your PC case.

Image: The Lian-Li UNI FAN AL120 in operation, displaying its dynamic ARGB lighting effects.

Засвар үйлчилгээ

Regular maintenance helps ensure optimal performance and longevity of your UNI FAN AL120:

• Тоос арилгах: Periodically clean dust from the fan blades and frame using compressed air or a soft brush. Accumulation of dust can impede airflow and increase noise levels.
• Шалгалт: Occasionally inspect the fan for any signs of wear, loose connections, or obstructions. Ensure cables are securely connected and not interfering with fan rotation.
• Програм хангамжийн шинэчлэлтүүд: Keep the L-Connect software updated to the latest version to benefit from performance improvements, new features, and bug fixes.

Алдааг олж засварлах

If you encounter issues with your UNI FAN AL120, consider the following troubleshooting steps:

• Сэнс эргэхгүй байна:
  • Check all power connections to the fan and controller.
  • Ensure the fan header on the motherboard or controller is properly connected.
  • Verify that the L-Connect software is running and fan speeds are not set to 0 RPM.
• ARGB гэрэлтүүлэг ажиллахгүй/буруу:
  • Confirm the ARGB cable is securely connected to the controller or motherboard's 3-pin 5V ARGB header. (Note: Do not connect to a 4-pin 12V RGB header, as this can damage the LEDs.)
  • Check L-Connect software settings for lighting effects and brightness.
  • If using motherboard software for ARGB control, ensure L-Connect is not conflicting or that control has been handed over correctly.
• L-Connect Software Issues:
  • Restart the L-Connect software or your computer.
  • Програм хангамжийн хамгийн сүүлийн хувилбарыг суулгасан эсэхээ шалгаарай.
  • Temporarily disable any conflicting RGB software from other manufacturers.
• Хэт их дуу чимээ:
  • Сэнсний ирийг мөргөж буй кабель эсвэл саад байгаа эсэхийг шалгана уу.
  • Сэнсний ирмэг дээр хуримтлагдсан тоосыг цэвэрлэ.
  • Reduce fan speed through the L-Connect software.

Үзүүлэлтүүд

Note: The listed product dimensions (34.2"L x 34.2"W x 16.6"H) appear unusually large for a 120mm fan and may refer to packaging or an incorrect entry. Standard 120mm fan dimensions are typically 120mm x 120mm x 25mm.

Баталгаат хугацааны мэдээлэл

Specific warranty details for the Lian-Li UNI FAN AL120 are not provided in this manual. For comprehensive warranty terms, conditions, and registration information, please refer to the official Lian-Li website or contact their customer support directly. It is recommended to retain your proof of purchase for warranty claims.

Дэмжлэг

For further assistance, technical support, or to download the latest L-Connect software and drivers, please visit the official Lian-Li webсайт:

Lian-Li Official Webсайт

Та мөн хэрэгтэй эх сурвалжууд болон Түгээмэл асуултуудыг олж болно Lian Li Amazon Store Page.