CPVAN Remote Control (2nd Generation) Instruction Manual

1. Бүтээгдэхүүн дууссанview

The CPVAN Remote Control (2nd Generation), model CP10 Pro, is designed for wireless operation of compatible CPVAN home security systems. This remote provides convenient control over your alarm system's functions from a distance.

Тохиромжтой байдал: This remote control is compatible with CPVAN CP2, CP2 Pro, CP7R, CP8, and CP9 Home Security Systems.

Зураг 1: Урд view of the CPVAN remote control.

2. Үндсэн шинж чанарууд

• Утасгүй ажиллагаа: Provides convenient control of your alarm system without physical interaction with the main unit.
• Өргөн нийцтэй байдал: Works with CPVAN CP2, CP2 Pro, CP7R, CP8, and CP9 alarm systems.
• Холын зайн удирдлага: Enables control of the motion sensor detector alarm from a significant range.
• Ашиглахад бэлэн: Comes with a pre-installed battery for immediate functionality.
• Эргономик дизайн: Features a comfortable and user-friendly form factor.

3. Багцын агуулга

• CPVAN Remote Control (2nd Generation)
• 1 x CR2 батерей (урьдчилан суулгасан)

4. Тохиргоо ба Хослуулах

Шинэ алсын удирдлагатай хослуулж байна

To integrate your new remote control with a CPVAN PIR motion sensor alarm, follow these steps:

1. Ensure the PIR motion sensor alarm is powered ON.
2. On the PIR motion sensor alarm, long press the Pairing button (often indicated by a signal icon) to enter pairing mode. The detector light will illuminate continuously.
3. Press any button on your remote control. You will hear two beeps from the alarm to confirm successful pairing.
4. Short press the Pairing button on the alarm again to exit pairing mode. Your remote has now been paired.

Image 2: Pairing process of the remote control with a motion sensor alarm.

5. Үйл ажиллагаа

Алсын удирдлагын функцууд

The CPVAN remote control features four distinct buttons for managing your alarm system:

Image 3: Labeled buttons on the CPVAN remote control.

• Гарны товчлуур (түгжигдсэн цоожны дүрс): Activates the alarm system, placing it in armed mode.
• Зэвсэггүй болгох товчлуур (түгжээг тайлсан цоожны дүрс): Deactivates the alarm system, turning off armed mode.
• Adjusting Volume Button (House Icon): Typically used to switch between different alarm modes or adjust volume settings on the connected alarm unit. Refer to your main alarm system manual for specific functions.
• SOS Button (SOS Text): Triggers an immediate emergency alarm. Use in situations requiring urgent attention.
• LED үзүүлэлт: A small light that illuminates to indicate button presses and operational status.

6. Засвар үйлчилгээ

Зай солих

The remote control is powered by one CR2 battery. When the remote's performance degrades or the LED indicator fails to light up upon button press, it may be time to replace the battery.

1. Алсын удирдлага дээрх зайны тасалгааг олоорой. Энэ нь ихэвчлэн арын эсвэл хажуу талд, жижиг шураг эсвэл хавчаараар бэхлэгддэг.
2. Тасалгааг болгоомжтой нээнэ үү.
3. Хуучин CR2 зайг салга.
4. Insert a new CR2 battery, ensuring correct polarity (+ and -).
5. Зайны тасалгааг найдвартай хаа.

Зайны төрөл: 1 x CR2 (3 Volts, Lithium Manganese Dioxide)

7. Алдаа засах

• Алсын удирдлага хариу өгөхгүй байна: Check the battery. Replace if necessary. Ensure the remote is within the operating range of the alarm system.
• Хослолтын алдаа: Ensure the alarm system is in pairing mode. Repeat the pairing steps carefully. Check if the remote's battery is charged.
• Санамсаргүй идэвхжүүлэлт: The remote keys can be sensitive. Avoid placing the remote in pockets or areas where buttons might be pressed inadvertently.

8. Техникийн үзүүлэлтүүд

Image 4: Dimensions of the CPVAN remote control.

9. Хэрэглэгчийн дэмжлэг

For further assistance, technical support, or warranty inquiries, please refer to the main manual of your CPVAN Home Alarm System or visit the official CPVAN website. You can also contact CPVAN customer service through the retailer where the product was purchased.

Үйлдвэрлэгч: CPVAN

Хэсгийн дугаар: CP2-RC