1. Танилцуулга
The Stetsom EQX764-7 Band Equalizer is a high-performance car audio graphic equalizer designed to provide precise control over your vehicle's sound system. This unit features a pre-amplifier and a 10V line driver, which helps to minimize noise and deliver a strong, clear audio signal to your amplifiers. With 7 adjustable equalization bands, dedicated subwoofer controls, and multiple input/output options, the EQX764 allows for detailed sound customization to suit your preferences.
2. Аюулгүй байдлын мэдээлэл
- Мэргэжлийн суурилуулалтыг санал болгож байна: For optimal performance and safety, installation by a qualified car audio technician is highly recommended.
- Батерейг салгах: Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and damage.
- Зөв холбох: Ensure the power connection includes an appropriate fuse (1A maximum, within 1 foot of the battery) to protect the unit and your vehicle's electrical system.
- Чийгнээс зайлсхийх: Төхөөрөмжийг ус эсвэл хэт их чийгэнд бүү оруул.
- Аюулгүй суурилуулалт: Mount the equalizer securely to prevent it from becoming a projectile in the event of sudden stops or accidents.
- Агааржуулалт: Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмжийн эргэн тойронд хангалттай агааржуулалтыг хангана.
3. Багцын агуулга
Дараах зүйлсийн багцад байгаа эсэхийг шалгана уу.
- Stetsom EQX764-7 Band Equalizer Unit
- Суурилуулах хаалт
- High Input Connector (Wire)
- Суурилуулах эрэг
4. Бүтээгдэхүүн дууссанview
The Stetsom EQX764 features a user-friendly layout with clearly labeled controls and connections. Understanding each component is essential for proper setup and operation.
Урд самбарын удирдлага
The front panel provides access to all audio adjustment controls, illuminated by blue LEDs for visibility.
- Дэд түвшин: Сабвуфер сувгийн гаралтын түвшинг тохируулна.
- Дэд давтамж: Сабвуферын гаралтын кроссовер давтамжийг тохируулна.
- HIGH/MAIN Input Switch: Selects between High-Level input and RCA (Main) input.
- ӨНДӨР ТҮВШИН: Adjusts the input sensitivity for the High-Level input.
- ҮНДСЭН ТҮВШИН: Adjusts the input sensitivity for the RCA (Main) input.
- FADER FRONT/REAR: Balances the audio output between the front and rear channels.
- 7-Band Equalization Controls: Individual rotary controls for adjusting the gain (+/-12dB) at specific frequencies: 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, and 16KHz.
Арын самбарын холболтууд
The rear panel houses all input and output connections.
- R SUB L OUT: Left and Right RCA outputs for the subwoofer ampнастан.
- ӨНДӨР: High-level input for connecting to factory head units without RCA outputs.
- R MAIN L IN: Left and Right RCA inputs for the main audio source.
- R REAR L OUT: Left and Right RCA outputs for the rear full-range ampнастан.
- R FRONT L OUT: Left and Right RCA outputs for the front full-range ampнастан.
- REM +: Remote turn-on input and power input terminals.
5. Тохиргоо & Суурилуулалт
Follow these steps for proper installation of your EQX764 equalizer.
5.1 Төхөөрөмжийг суурилуулах
Use the provided mounting brackets and screws to secure the EQX764 in a suitable location within your vehicle. Ensure the location allows for easy access to controls and adequate ventilation.
5.2 Power and Remote Activation
Connect the EQX764 to your vehicle's electrical system as follows:
- -г холбоно уу +12V terminal to the vehicle's positive battery terminal using a 20AWG cable. Install a 1A fuse within 1 foot of the battery.
- -г холбоно уу GND terminal to a clean chassis ground point.
- -г холбоно уу REM (remote) terminal to the remote output of your car radio/player using a 20AWG cable. This will turn the equalizer on and off with your head unit.
5.3 Аудио холболт
The EQX764 supports both RCA and High-Level inputs and provides dedicated outputs for front, rear, and subwoofer channels.
- Оролтын эх сурвалж:
- For head units with RCA outputs, connect the RCA cables from your head unit to the R MAIN L IN ports on the EQX764.
- For factory head units or those without RCA outputs, use the provided High Input Connector to connect speaker-level wires from your head unit to the HIGH-IN терминалууд.
- Гаралт руу Ampамьдрагчид:
- Connect RCA cables from the R FRONT L OUT ports to your front full-range ampнастан.
- Connect RCA cables from the R REAR L OUT ports to your rear full-range ampнастан.
- Connect RCA cables from the R SUB L OUT ports to your subwoofer ampнастан.
6. Ашиглалтын заавар
Once installed, the EQX764 allows for fine-tuning of your audio system.
6.1 Input Selection and Level Adjustment
- Оролтоо сонгоно уу: -г ашиглана уу HIGH/MAIN switch to select the appropriate input source (High-Level or RCA).
- Оролтын түвшинг тохируулах: -г ашиглана уу ӨНДӨР ТҮВШИН or ҮНДСЭН ТҮВШИН knobs to match the output voltage of your head unit. Start with these controls at their minimum and slowly increase until a clear, undistorted sound is achieved at a moderate volume from your head unit.
6.2 Fader Control
The FADER FRONT/REAR knob allows you to adjust the balance of sound between your front and rear speakers. Turn it towards 'FRONT' to emphasize front speakers or towards 'REAR' for rear speakers.
6.3 7-Band Equalization
Each of the seven rotary knobs corresponds to a specific frequency band, allowing you to boost or cut frequencies by up to 12dB. Adjust these controls to shape the sound to your preference:
- 50Гц: Controls the deepest bass frequencies.
- 125Гц: Affects mid-bass and warmth.
- 315Гц: Influences the lower midrange, body of vocals and instruments.
- 750Гц: Controls the central midrange, clarity of vocals.
- 2.2КГц: Affects upper midrange, presence of instruments.
- 6КГц: Controls lower treble, brightness of cymbals and higher frequencies.
- 16КГц: Adjusts the highest treble frequencies, airiness and sparkle.
6.4 Subwoofer Controls
The dedicated subwoofer controls provide precise management of your bass output:
- Дэд түвшин: Adjust the overall volume of the subwoofer output.
- Дэд давтамж: Set the low-pass crossover frequency for the subwoofer. This determines the highest frequency that will be sent to your subwoofer amplifier. Adjust this to blend seamlessly with your main speakers.
7. Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Оролтууд | MAIN (RCA) and HIGH IN (Wire) |
| Гаралт | SUB OUT, FRONT and REAR |
| SUB Level and Frequency Control | Тиймээ |
| Оролт сонгогч | MAIN and HIGH |
| Түвшингийн хяналт | MAIN and HIGH |
| Fader Control | Урд ба хойд |
| Эквалайзер хамтлагууд | 7-band (-12dB = +12dB) |
| SUB Frequency Control Range | 60 Гц - 90 Гц |
| V OUT @ 14.4V (Subwoofer) | 10 В RMS |
| V OUT @ 14.4V (Front & Rear) | 8.5V RMS (Line Driver) |
| Input Sensitivity (Main RCA) | 3.3V RMS @ 14.4V |
| Input Sensitivity (High Wire) | 25V RMS @ 14.4V |
| Input Impedance (Main RCA) | 20К Ом |
| Input Impedance (High Wire) | 1К Ом |
| Гаралтын эсэргүүцэл | 47 Ом |
| Давтамжийн хариу үйлдэл | 5Гц - 140КГц |
| THD | < 0.1% |
| SNR | > 100дБ |
| Хөндлөнгөөс | > 85дБ |
| Нийлүүлэлт ботьtage | 9V - 16V DC |
| Max Consumption @ 12.6V | 290мА |
| Хэмжээ (L x W x H) | 7.25" x 3.24" x 1" (184 x 82.3 x 26 мм) |
| Жин | 0.68 lb / 310 grams |
8. Алдаа засах
If you encounter issues with your EQX764, refer to the following common problems and solutions:
- Эрчим хүчгүй:
- Check all power connections (+12V, GND, REM) for secure contact.
- Verify the 1A fuse near the battery is intact. Replace if blown.
- Ensure the remote wire from the head unit is providing a +12V signal when the head unit is on.
- Дууны гаралт байхгүй:
- Confirm the correct input source (HIGH or MAIN) is selected via the switch.
- Check all RCA and High-Level input/output connections for proper seating.
- Ensure the HIGH LEVEL and MAIN LEVEL controls are not set to minimum.
- Verify that connected amplifiers are powered on and receiving a signal.
- Гажуудсан дуу:
- Reduce the HIGH LEVEL or MAIN LEVEL input sensitivity.
- Lower the gain settings on your ampамьдрагчид.
- Ensure none of the equalization bands are boosted excessively.
- Hissing or Engine Noise:
- Ensure the EQX764 and all amplifiers have a solid, clean ground connection.
- Route RCA cables away from power cables to prevent interference.
- Check for proper grounding of the head unit.
9. Засвар үйлчилгээ
The Stetsom EQX764 is designed for durability and requires minimal maintenance.
- Цэвэрлэгээ: Төхөөрөмжийг цэвэрлэхдээ зөөлөн, хуурай даавуу ашиглаарай. Зүлгүүрийн цэвэрлэгч эсвэл уусгагч бодисоос зайлсхий.
- Холболтууд: Бүх утас холболтыг найдвартай, зэврэлтээс хамгаалахын тулд үе үе шалгаж байгаарай.
10. Баталгаат хугацаа ба дэмжлэг
Stetsom products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Stetsom webсайт. Худалдан авалтын баримтаа аливаа баталгаат нэхэмжлэлийг худалдан авсан баримт болгон хадгална уу.
For additional assistance, you may contact Stetsom customer support through their official channels.
