aigo AC SE 360 Water Cooler Instruction Manual

Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AC SE 360 All-in-One (AIO) Liquid CPU Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance.

Аюулгүй байдлын мэдээлэл

• Суулгахаасаа өмнө компьютероо унтрааж, хананы залгуураас салгасан эсэхээ шалгаарай.
• Гэмтлээс зайлсхийхийн тулд эд ангиудыг болгоомжтой харьц.
• Refer to your motherboard manual for specific CPU socket and fan header locations.
• Do not attempt to open the pump or radiator as this may void the warranty and cause leaks.
• Хүүхдийн гар хүрэхгүй газар хадгална.

Багцын агуулга

Суулгахаасаа өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгаарай.

• aigo AC SE 360 Radiator with Integrated Pump/Water Block
• 3 х 120 мм хөргөх сэнс
• Mounting Hardware for Intel Sockets (LGA 2066/2011-V3/2011/1700/1366/1200/115X)
• Mounting Hardware for AMD Sockets (FM1/FM2/FM2+/AM2/AM2+/AM3/AM3+/AM4)
• Дулааны зуурмаг (урьдчилан түрхсэн эсвэл хоолойд)
• Fan Screws and Radiator Screws
• Хэрэглэгчийн гарын авлага (энэ баримт бичиг)

Үзүүлэлтүүд

Тохиргоо ба суурилуулалт

This section guides you through the installation process of the aigo AC SE 360 liquid cooler. Ensure your system is powered off and unplugged before proceeding.

1. Радиатор болон сэнсийг бэлтгэ

Attach the three 120mm fans to the radiator using the provided long screws. Ensure the fan airflow direction is appropriate for your case's cooling strategy (typically pushing air through the radiator and out of the case, or pulling air in).

Зураг: дээрээс доош view of the radiator with fans installed. This shows the orientation of the fans on the radiator.

Image: Angled rear view of the assembled cooler, highlighting the fans and radiator structure.

2. Install the Radiator in the PC Case

Mount the assembled radiator and fan unit into your PC case. Common mounting locations include the top or front of the case. Use the shorter screws provided to secure the radiator to the case's fan mounts. Ensure there is adequate clearance for the tubes and other components.

Image: Detail of the radiator fins and mounting points, useful for understanding case installation.

3. CPU залгуурыг бэлтгэ

Select the appropriate mounting bracket for your CPU socket (Intel or AMD). Attach the backplate (if required for your socket type) to the rear of the motherboard. Install the standoffs onto the motherboard around the CPU socket.

4. Install the Water Block/Pump

Ensure the CPU surface is clean. If thermal paste is not pre-applied to the water block, apply a small pea-sized amount to the center of your CPU's integrated heat spreader (IHS). Carefully place the water block onto the CPU, aligning it with the standoffs. Secure the water block with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

Зураг: хажуу тал view of the pump/water block, illustrating its compact design.

Зураг: өнцөгтэй view of the complete cooler assembly, showing the connection between the pump and radiator.

5. Кабель холбох

• Connect the pump's power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. Consult your motherboard manual for the correct header.
• Connect the fan cables to the CPU_FAN header or a dedicated fan controller/hub. If your fans have RGB lighting, connect the RGB cables to a compatible RGB header on your motherboard or an RGB controller.
• Ensure all cables are routed neatly and do not interfere with other components or airflow.

Зураг: Урд view of the cooler with RGB lighting, demonstrating the aesthetic appearance after installation and power connection.

Ашиглалтын заавар

Once installed, the aigo AC SE 360 operates automatically. The pump and fans will adjust their speed based on CPU temperature, managed by your motherboard's BIOS/UEFI settings or dedicated software.

• Анхны асаалт: After installation, power on your computer. Monitor CPU temperatures using system monitoring software to ensure proper function.
• BIOS/UEFI тохиргоо: Access your motherboard's BIOS/UEFI to verify that the CPU_FAN header (or AIO_PUMP header) is set to PWM mode and that fan curves are configured for optimal cooling and noise levels.
• RGB хяналт: If your motherboard supports RGB synchronization, use its software to customize the lighting effects of the fans and pump.

Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь шингэн хөргөгчийн урт наслалт, оновчтой ажиллагааг хангахад тусалдаг.

• Тоос цэвэрлэх: Шахсан агаар эсвэл зөөлөн сойз ашиглан радиаторын сэрвээ, сэнсний ирний тоосыг үе үе цэвэрлэ. Тоос хуримтлагдах нь агаарын урсгалыг саатуулж, хөргөлтийн үр ашгийг бууруулдаг.
• Хоолойн үзлэг: Occasionally inspect the tubes for any signs of kinks, leaks, or damage.
• Сэнс шалгах: Ensure all fans are spinning freely and quietly. If a fan becomes noisy or stops spinning, it may need replacement.
• Насосны шалгалт: Listen for any unusual noises from the pump. A constant, low hum is normal, but grinding or gurgling sounds may indicate an issue.

Алдааг олж засварлах

Баталгаат болон дэмжлэг

aigo products are designed for reliability and performance. For warranty information, technical support, or replacement parts, please refer to the official aigo webсайт эсвэл худалдагчтайгаа холбогдоно уу.

Албан ёсны Webсайт: www.aigo.com (Жич: Энэ бол орлуулагч юм URL. Please refer to your product packaging or official documentation for the correct support webсайт.)

Please have your product model number (ACSE360-WH) and purchase date ready when contacting support.