1. Танилцуулга
The ONVIS Smart Motion Sensor (model SMS2) is a versatile smart home device designed to enhance your home security and automation. It integrates a Passive Infrared (PIR) motion detector with a wireless hygrometer and thermometer, providing comprehensive environmental monitoring. This sensor leverages Thread technology for improved responsiveness and works seamlessly with Apple HomeKit, allowing for advanced automation and privacy-focused data handling.
Figure 1.1: ONVIS Smart Motion Sensor (SMS2) and iPhone showing a motion detection alert.
Key features include real-time motion detection, temperature and humidity monitoring, and compatibility with Apple HomeKit for voice control via Siri and integration into smart home routines. All data is end-to-end encrypted and stored locally on your iOS devices, ensuring 100% privacy with no cloud storage or tracking.
Зураг 1.2: Илүүview of ONVIS SMS2 features including Thread support and privacy.
2. Тохиргоо ба суурилуулалт
2.1 Багцын агуулга
- ONVIS Smart Motion Sensor (SMS2)
- 2 x AAA батерей (урьдчилан суулгасан эсвэл дагалдаж ирсэн)
- Mounting accessories (screws and anchors)
- Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
2.2 Батерей суурилуулах
The ONVIS SMS2 sensor is powered by two AAA alkaline batteries. These are typically included and may be pre-installed. If not, open the battery compartment on the back of the device and insert the batteries, ensuring correct polarity (+/-).
2.3 Connecting to Apple HomeKit
The ONVIS SMS2 sensor is designed to work with Apple HomeKit. A Thread HomeKit Hub is required for full functionality and responsiveness. Compatible hubs include:
- Apple TV 4K (2nd Gen, A2169 or later)
- Apple HomePod (2-р үеийн)
- Apple HomePod мини
To add the sensor to your HomeKit setup:
- Ensure your Thread HomeKit Hub is powered on and connected to your network.
- Open the Apple Home app on your iOS device (iOS 17.4 or above is required).
- Tap the "+" icon in the top right corner and select "Add Accessory".
- Scan the HomeKit setup code located on the back of the ONVIS SMS2 sensor or its packaging.
- Follow the on-screen prompts to assign the sensor to a room and configure its settings.
For advanced settings and firmware updates, download the Onvis Home app from the App Store. While the sensor works with HomeKit, the Onvis Home app provides additional controls and access to historical data.
2.4 Мэдрэгчийг суурилуулах
The ONVIS SMS2 can be wall-mounted using the included screws and anchors, or placed on a flat surface. For optimal motion detection, consider the following:
- Mount the sensor at a height that allows for clear line-of-sight to the area you wish to monitor.
- Avoid placing the sensor directly facing heat sources, air vents, or direct sunlight, as these can cause false readings.
- The sensor has a maximum detection range of 7 meters (approximately 23 feet) and a 120° coverage angle.
Figure 2.1: Motion sensor coverage area.
3. Мэдрэгчийг ажиллуулах
3.1 Хөдөлгөөн илрүүлэх
The primary function of the ONVIS SMS2 is motion detection. When movement is detected within its range, the sensor can trigger automations in Apple HomeKit, such as turning on lights or sending notifications.
- Бодит цагийн мэдэгдэл: Receive instant alerts on your iOS device when motion is detected, even when you are away from home, provided you have a HomeKit hub.
- Smart Light Triggering: Automate your lights to turn on when you enter a room and off after a preset period of no motion.
Figure 3.1: Triggering smart lights with motion detection.
Figure 3.2: Instant notification upon motion detection.
3.2 Температур, чийгшлийн хяналт
The ONVIS SMS2 includes integrated temperature and humidity sensors. These readings are automatically updated every 15 minutes and can be accessed via the Apple Home app or the Onvis Home app.
- Мэдээлэлд хандах: Ask Siri for current room temperature and humidity, or view records in the Apple Home app.
- Түүхийн тэмдэглэлүүд: The Onvis Home app allows you to check temperature, humidity, and motion records, with up to 100 recent records and 32 days of historical data.
- Автоматжуулалт: Use temperature and humidity readings as triggers for HomeKit automations, such as activating a humidifier or dehumidifier.
Figure 3.3: Voice control for temperature and humidity readings.
Figure 3.4: Temperature and humidity monitoring capabilities.
Figure 3.5: Sensor used in a greenhouse, demonstrating data storage.
3.3 Smart Activation & Deactivation
The Onvis app allows you to customize motion alerts and set specific time slots for motion detection. This provides complete control over when you receive notifications and when automations are active.
- Scheduled Detection: Configure the sensor to only detect motion during specific hours, aligning with your daily routine and preventing unnecessary alerts.
- Disable Sensor: The Onvis app and certain 3rd party HomeKit apps allow you to disable the motion sensor, preventing it from triggering automations. This feature is exposed to HomeKit, enabling its use in Scenes, Automations, and Shortcuts.
Figure 3.6: Personalizing monitoring times for the sensor.
3.4 Өдрийн гэрлийн мэдрэгч
The sensor includes a daylight detection feature, which can be used to ensure lights only come on when needed, optimizing energy usage.
Figure 3.7: Daylight sensor detects ambient light.
4. Засвар үйлчилгээ
4.1 Батерейг солих
The ONVIS SMS2 uses 2 AAA alkaline batteries. The battery life is approximately 8,760 hours (about 1 year). When the battery level is low, you may receive a notification in the Apple Home app or Onvis Home app. To replace the batteries:
- Carefully remove the sensor from its mounting location.
- Төхөөрөмжийн арын хэсэгт байрлах зайны тасалгааны тагийг нээнэ үү.
- Remove the old batteries and insert new AAA alkaline batteries, observing the correct polarity.
- Close the battery compartment cover and re-mount the sensor.
4.2 Цэвэрлэгээ
To ensure optimal performance, keep the sensor clean. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or immerse the device in water.
4.3 Програм хангамжийн шинэчлэлтүүд
Periodically check for firmware updates using the Onvis Home app. Firmware updates can improve performance, add new features, and address any known issues. Ensure the sensor has sufficient battery life before initiating an update.
5. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Sensor not responding/offline in Home app. | Low battery, out of range of Thread HomeKit Hub, hub offline, network issues. | Check battery level and replace if necessary. Ensure sensor is within range of your Thread HomeKit Hub. Verify your HomeKit Hub (Apple TV, HomePod mini) is online and connected to the internet. Restart your HomeKit Hub and Wi-Fi router. |
| False motion detections. | Heat sources, direct sunlight, pets, drafts. | Relocate the sensor away from heat sources (radiators, direct sunlight), air vents, or areas with frequent pet movement. Adjust motion sensitivity in the Onvis Home app if available. |
| Motion-based automations not working in iOS Home app (17.2). | Known software issue with iOS Home app (17.2). | As noted by ONVIS, motion-based HomeKit automations for SMS2 can be set up in the Onvis Home app or most 3rd party HomeKit apps. The configuration will sync to the HomeKit system. This issue may be resolved in later iOS versions. |
| Температур/чийгшлийн заалт буруу харагдаж байна. | Sensor placement, environmental factors. | Ensure the sensor is not in direct sunlight, near heat sources, or in a drafty area. Allow time for readings to stabilize after placement. Some 3rd party HomeKit apps or the Onvis app may offer calibration options. |
| Cannot add sensor to HomeKit. | Incorrect setup code, existing pairing, HomeKit hub issues. | Double-check the HomeKit setup code. Ensure the sensor is reset if it was previously paired. Verify your HomeKit hub is functioning correctly and updated. |
If you continue to experience issues, please refer to the support section or contact ONVIS customer service.
6. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | SMS2 |
| Брэнд | ONVIS |
| Өнгө | Цагаан |
| Эрчим хүчний эх үүсвэр | Батерейгаар ажилладаг |
| Зайны төрөл | 2 x AAA шүлтлэг батерей (дагсан) |
| Зайны ашиглалт | Approx. 8,760 hours (1 year) |
| Зүйлийн жин | 3.52 унц |
| Бүтээгдэхүүний хэмжээс | 2.5 x 1.9 x 1.45 инч |
| Хөдөлгөөний хамгийн дээд хязгаар | 7 метр (ойролцоогоор 23 фут) |
| Хөдөлгөөн илрүүлэх өнцөг | 120° |
| Суурилуулах төрөл | Ханын бэхэлгээ |
| Ашиглалтын температур | 14°F - 113°F (-10°C - 45°C) |
| Чийглэгийн хүрээ | 5% - 95% |
| Тохиромжтой төхөөрөмжүүд | Apple HomeKit (iOS 17.4 and above required) |
| Холболт | Thread (requires Thread HomeKit Hub) |
| Өгөгдөл хадгалах | 100 recent records, 32 days historical data (Onvis Home app) |
7. Баталгаат хугацаа ба дэмжлэг
7.1 Баталгаат хугацааны мэдээлэл
ONVIS products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official ONVIS webнарийвчилсан баталгаат нөхцөлийг сайтаас авна уу. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.
7.2 Хэрэглэгчийн дэмжлэг
For technical assistance, troubleshooting, or general inquiries, please contact ONVIS customer support. You can usually find contact information on the official ONVIS website or within the Onvis Home app.
Official ONVIS Webсайт: www.onvis.com (Жич: Энэ бол орлуулагч юм URL тодорхой дэмжлэг байхгүй тул URL was provided in the input.)
Onvis Home App: Available on the Apple App Store for iOS devices.
